1 / 28

Please read this before using presentation

Please read this before using presentation. This presentation is based on content presented at the Mines Safety Roadshow held in October 2008 and Exploration Safety Roadshow held in November 2008

kreese
Download Presentation

Please read this before using presentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Please read this before using presentation This presentation is based on content presented at the Mines Safety Roadshow held in October 2008 and Exploration Safety Roadshow held in November 2008 It is made available for non-commercial use (e.g. toolbox meetings) subject to the condition that the PowerPoint file is not altered without permission from Resources Safety Supporting resources, such as brochures and posters, are available from Resources Safety For resources, information or clarification, please contact: ResourcesSafety@docep.wa.gov.au or visit www.docep.wa.gov.au/ResourcesSafety

  2. Toolbox presentation: Manual tasks — assessing the risks and making the changesPrepared by Wendy Pietrocola, Ergonomics, for Resources Safety

  3. Outline Part 1 • Terminology • Impact of injuries from performing manual tasks at work • Manual task project • Risk management process and its implementation Part 2 • Breakout session – practical exercises

  4. Terminology – manual tasks Manual task is a label given to any activities that require a person to use their physical body (musculoskeletal system) to perform work, including work that involves the use of force for: • lifting / lowering; pushing / pulling; carrying; moving; holding; or restraining anything and work that involves: • repetitive actions; sustained postures; and concurrent exposure to vibration Manual task replaces the term manual handling

  5. Examples of manual tasks

  6. Terminology – hazardous manual tasks Hazardous manual tasks refers to any manual tasks that involve certain characteristics that increase the risk of injury, including: • repetitive or sustained application of force • repetitive or sustained awkward postures • repetitive or sustained movements • application of high force • exposure to sustained vibration • involve handling of person or animal • involve handling of unstable or unbalanced loads that are difficult to grasp or hold

  7. Terminology – musculoskeletal disorders Hazardous manual tasks can lead to a variety of injuries and conditions collectively referred to as musculoskeletal disorders (MSD) including: • sprains and strains of muscles, ligaments and tendons • back injuries, including damage to the muscles, tendons, ligaments, spinal discs, nerves, joints and bones • joint injuries or degeneration, including injuries to the shoulder, elbow, wrist, hip, knee, ankle, hands and feet • bone injuries • nerve injuries • muscular and vascular disorders as a result of hand-arm vibration • soft tissue hernias

  8. Analysis of accident and injury data – extent of manual task injuries • Manual task injuries (i.e. MSD) consistently account for about one third of new LTIs and DIs in WA mining industry and over half of recurrences • About two thirds of new manual task LTIs and DIs are serious, that is result in 14 or more days or shifts off work, on alternative or light duties, or a combination of these • About 90% of manual task injury recurrences are serious Source: Resources Safety’s AXTAT database

  9. Analysis of accident and injury data – cost of manual task injuries • Between July 2004 and June 2006, manual task injuries (MSD) resulted in 643 LT claims and 1,064 no-LT claims, representing 38.5% of all LT claims and 30% of all no-LT claims • Cost of manual task LT claims was $23.9mil (37% total) and cost of no-LT claims was $1.8mil (30% total) • Average cost of manual task injury claim was $36,891 per LT claim and $1,719 per no-LT claim • 96,763 days were lost as a result of manual task injuries, representing 45% of total days lost from workplace injuries Source: WorkCover WA

  10. Manual task project - overview Scoping study gathered information on manual task injuries (MSD) and established current state of knowledge of managing manual task risk within WA mining industry • Analysis of accident and injury data • Review of current literature • Consultation with industry stakeholders Based on findings, a number of directions and activities to reduce manual task injuries were recommended Recommendations broadly endorsed by Mining Industry Advisory Committee (MIAC)

  11. Recommendations from scoping study Recommendations aimed at raising manual task standards and reducing extent and severity of injuries from performing manual task To achieve these goals, Resources Safety is undertaking a leadership role in: • education and information activities, followed by • compliance activities, in • consultation with industry stakeholders

  12. Risk management process for manual tasks Step 1: Hazard identification • Identify all hazardous manual tasks Step 2: Risk assessment • Assess the risk of MSD that arise from these hazardous manual tasks and identify sources of risk Step 3: Risk control • Decide on and use appropriate control measures to alter sources of risk and minimise risk of MSD Step 4: Monitor and review • Follow up to find out whether changes have eliminated or reduced assessed risks

  13. Step 1: Identifying hazardous manual tasks • Check sources of information such as injury and hazard reports • Consult with employees, supervisors and SHReps • Look at task and identify any of the characteristics that make it hazardous • Prioritise

  14. Step 2: Risk assessment Risk assessment should determine: • whether the task poses or increases risk of MSD • sources of the risk, and • may rate the level of risk

  15. Direct risk factors • Postures and movements of worker, including repetitive awkward postures and sustained awkward postures • Forces involved in task, including high force, jerky or unexpected forces and speed • Duration and frequency of task, including how long the task is performed for and how often

  16. Contributing risk factors Work environment • temperature • humidity • Wind • rain • lighting • floor and ground surfaces • housekeeping

  17. Contributing risk factors (continued) Systems of work, work organisation and work practices • high workloads and tight deadlines • little latitude for workers to influence workload or work methods • unsuitable or insufficient resources such as staffing levels, equipment and guidance available to workers Exposure to vibration • whole-body vibration • hand-arm vibration

  18. Sources of risk • Work area design and layout – inadequate design or placement of items in the workplace • Nature of the item or load being handled or used – weight, balance, handle design or orientation, shock loading or impact forces, failure to select for purpose • Working environment – thermal environment, floor surfaces, steps, ramps, limited housekeeping, vibration • Systems of work, work organisation, methods of work, job design for “average” workers

  19. Step 3: Risk control • Risk control means implementing effective measures to eliminate or minimise risk of MSD • Risk control process determines what needs to be done to alter the sources of risk identified by the risk assessment, in order to eliminate or minimise the risk of MSD • Control measures should follow the hierarchy of controls. • Elimination or redesign and engineering controls should be implemented over administrative and PPE controls

  20. Step 3: Risk control – hierarchy of controls • If possible, do not perform the hazardous manual task. Eliminate task by introducing mechanisation or changing the system of work • Change the way a hazardous manual task is performed to eliminate the risks of MSD • If the risks of MSD cannot be eliminated, change the way the hazardous manual task is performed to minimise the risks • When the risk cannot be eliminated or minimised, the use of information, training instruction, supervision, PPE or a combination of these can be used as a last resort or to supplement other controls

  21. Control measures Effective control measures may alter: • design and layout of the work area • nature of load or item to be handled or used • work environment • way work is organised or current work practices That is, address the source of the risk!

  22. Participative ergonomics • Effective risk management essential to achieve a reduction in overall manual task risk and prevent MSD • Participative ergonomics is internationally recommended approach – basic concept is to involve workers in improving their workplace to reduce injury and improve productivity • Work teams, usually a supervisor and a small group of workers (‘experts’), identify the hazardous manual tasks in their work and complete the risk assessment process • Based on risk assessment, the team, in consultation with management, develops risk control options and plans the implementation

  23. Participative ergonomics (continued) • Work team is responsible for evaluating the implemented control measures • Management commitment and effective risk management systems are required for approach to be effective • Access to ergonomics expert assistance may be required to assist work teams with difficult or complex problems • It is essential that work team members have adequate training

  24. Practical exercises Use information sheets available from Resources Safety website

  25. Practical exercise 1 Scenario You work at a typical WA mining workplace. One in three of the workplace injuries is related to performing manual tasks. You are a member of a small manual task work team and your team has been asked to identify any hazardous manual tasks in your work or operational area. Exercise In your group, discuss the steps you would take to identify the hazardous manual tasks and how you would prioritise the tasks in terms of addressing the risk.

  26. Practical exercise 2 Scenario You have identified the hazardous manual task with the highest priority is loading and unloading equipment and materials from the back of vehicles. Most employees need to load and unload equipment and materials several times a day. The equipment and materials vary in size, shape and weight. Usually things are lifted to and from the back of the vehicle to and from the ground. Exercise (refer to handout on following slide) In your group, identify any direct and indirect risk factors and the source of risk in the task.

  27. Practical exercise 3 Discuss in your group how to change the sources of the risk to eliminate or reduce the risk of musculoskeletal disorders from loading and unloading vehicles. Consider: • immediate control measures • short-term control measures • long-term control measures

More Related