Loading in 2 Seconds...
Loading in 2 Seconds...
This report studies Tipper Body Equipment in Global market, especially in North America, Europe, China, Japan, Southeast Asia and India, focuses on top manufacturers in global market, with capacity, production, price, revenue and market share for each manufacturer\n
The global tipper body equipment market is segmented on the basis of tripping
type, load capacity type, cylinder type, tipper body frame, chassis type, end use
type, and region. On the basis of type, the global market is classified into three-
way tipper body, rear tipper body and roll-off tipper body.
Truck Tipper Bodies are used as a medium of logistics for loading and dumping of the process material
commonly used in construction, mining and waste management fields. The Tipper Body Equipment
mainly encompasses of cylinder, tipper frame and tipper body frame. The dimension of tipper frame
and tipper body frame depends on the dimension of vehicle chassis. It primarily provides the heavy
commercial vehicles and light commercial vehicle by providing solutions to transport the material in
large capacities over long distances and locations where direct human intervention is not desired. The
tipper body equipment has been a better substitute for the conventional tractor trailers for their
inadequate operation at inaccessible terrains.
Browse Full Research Report @
Increasing urbanization, mining and ongoing infrastructural development in developed as well as
developing nations is primarily driving the growth of the tipper body equipment. Increasing
environmental issues and severe government regulations regarding the waste management system
has been another factor that is driving the growth of the tipper body equipment market. Whereas,
rise in the prices of oil is a restraining factor.
The global tipper body equipment market is segmented on the basis of tripping type, load capacity
type, cylinder type, tipper body frame, chassis type, end use type, and region. On the basis of type,
the global market is classified into three-way tipper body, rear tipper body and roll-off tipper body.
On the basis of load capacity, the global market is classified into general purpose, light purpose, heavy
purpose tipper body equipment and extra heavy purpose. On the basis of cylinder type, the global
market is classified into hydraulic cylinder and pneumatic cylinder.
Hydraulic cylinder is made from a tube inside of which a piston moves. The piston separates the
cylinder in two remote chambers due to a piston that make the seal between the chambers. The
piston moves by an injection of a fluid inside one of the cylinder chambers. A hydraulic cylinder works
owing to pressured oil (mineral hydraulic oil), contrary to pneumatic cylinders that works with
compressed air. The air is compressible. Pneumatic cylinders: sometimes known as air cylinders, are
mechanical devices which use the power of compressed gas to produce a force in reciprocating linear
Request Sample Copy of this Market Research @
On the tipper body frame, the global market is classified into steel tipper body frame and aluminum
tipper body frame. On the basis of chassis type, the global market is classified into 6X4 (4-wheel drive
vehicle), 6X6 (6-wheel drive vehicle), 8X4 (4-wheel drive vehicle), 8X6 (6-wheel drive vehicle) and 8X8
(8-wheel drive vehicle). Both 8x4 and 6x4 chassis handling the toughest tipper work. On the basis of
end use type, the global market is classified into construction, mining and waste management for
heavy commercial vehicles as well as agriculture & horticulture for light commercial vehicles.
The construction segment holds the largest market share of the tipper body equipment market. As
the global economic growth rate is little uncertain, with the GDP of Europe and Latin America not
growing at a required rate will affect the growth of construction and mining segment thus lowering
the growth of tipper body equipment market.
Whereas, Asia Pacific and North American market is expected to have higher growth rate for the
same due to increased scope of business in construction and mining segment.
Geographically, the global market is segmented into North America, Latin America, Asia Pacific, Japan,
Western Europe, Eastern Europe, Middle East and Africa. The top manufacturer of tipper body
equipment such as Ingimex Ltd and VFS Southampton are based in Europe where the request in the
tipper body equipment market is projected to grow due to substantial growth of the European
construction industry. The demand for the equipment is also increasing due to the BRICS economies
such as India & Russia. Chinese market will significantly profit from mining industry due to increased
scope of bauxite and iron ore extraction.
The key players of the global market are Ingimex Ltd, VFS Southampton Ltd, Thompsons (UK) Ltd,
Crysteel Manufacturing Inc, F.X. MEILLER Fahrzeug-und Maschinenfabrik-GmbH & Co, Hyva, Alutip
(Pty) Ltd, Fruehauf Ltd, Gorski Engineering (Pty) Ltd, and North West Tippers Ltd.
This report studies Tipper Body Equipment in Global market, especially in North America, Europe,
China, Japan, Southeast Asia and India, focuses on top manufacturers in global market, with
capacity, production, price, revenue and market share for each manufacturer, covering
• Schmitz Cargobull Ag
• Crysteel Manufacturing
• Thompsons (Uk)
• Vfs (Southampton)
• Cantoni & C S.P.A.
• Bion industrial Llc
• F.X. Meiller Fahrzeug- U. Maschinenfabrik- Gmbh
• Hyva Global B.V
See More Reports of this Category by Million Insights @
Market Segment by Regions, this report splits Global into several key Regions, with production,
consumption, revenue, market share and growth rate of Tipper Body Equipment in these regions,
from 2011 to 2021 (forecast), like
• North America
• Southeast Asia
Split by product type, with production, revenue, price, market share and growth rate of each type,
can be divided into
• Roll-off Tipper Body
• Three-Way Tipper Body
• Rear Tipper Body
Split by application, this report focuses on consumption, market share and growth rate of Tipper
Body Equipment in each application, can be divided into
• Waste Management
• Marine Services
Browse Full Research Report @
At Million Insights, we work with the aim to reach the highest levels of customer satisfaction.
Our representatives strive to understand diverse client requirements and cater to the same with the
most innovative and functional solutions.
Research Support Specialist, USA
Felton Office Plaza 6265 Highway 9
Felton, California 95018, United States
Office No. 302, 3rd Floor, Manikchand
Galleria, Model Colony, Shivaji Nagar,
Pune, MH, 411016 India
Visit Our Blog: www.millioninsights.blogspot.com