1 / 20

Explicit Approximation

Explicit Approximation. Explicit Solution. Eqn. 4.11 (W&A). Everything on the RHS of the equation is known. Solve explicitly for ; no iteration is needed. Explicit approximations are unstable unless small time steps are used. Problems with explicit solution:

kirk-page
Download Presentation

Explicit Approximation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Explicit Approximation

  2. Explicit Solution Eqn. 4.11 (W&A) Everything on the RHS of the equation is known. Solve explicitly for ; no iteration is needed. Explicit approximations are unstable unless small time steps are used.

  3. Problems with explicit solution: • Requires small time step • Unnatural propagation of boundary effect • Large mass balance error for some time steps suggests • t = 5 minutes is too large.

  4. In general: where  = 1 for fully implicit  = 0.5 for Crank-Nicolson  = 0 for explicit

  5. Implicit Approximation

  6. Implicit Solution and use Gauss-Seidel iteration. Solve for

  7. n+1 t m+3 Iteration planes m+2 m+1 n

  8. Implicit Solution Spreadsheet

  9. t = 5 Note: at t=5 min, the boundary effect is propagated past the first node near the boundary.

  10. Computational molecules Implicit solution Explicit solution

  11. t = 10 Compare with matrix solution given in directions for Problem Set 3.

  12. t = 5 Note: at t=5 min, the boundary effect is propagated past the first node near the boundary.

  13. t = 1

  14. t = 0.5

  15. Sensitivity to time step at x = 90 m t = 5 minutes t = 10 minutes

  16. Note small water balance error t = 5

  17. Use of a time step multiplier Most transient problems will “shock” the system at the beginning of the simulation. The shock could be a drop in water level or the start of pumping, for example. The system will respond rapidly to the “shock” and to capture this rapid response it is necessary to use small time steps. Such small time steps are not necessary later in the simulation. Hence, a time step multiplier increases the size of the time step as the solution progresses.

  18. Use of a time step multiplier tnew = told x MULT where MULT is the time step multiplier, e.g., 1.2

  19. Could also solve the implicit finite difference equation using SOR iteration. Gauss-Seidel value

  20. Another option for solving the implicit finite difference eqn. is a “direct solution” using matrix methods. All known terms are on the RHS; all unknown terms are on the LHS. Solve this equation using matrix methods. See W&A, p. 95

More Related