180 likes | 296 Views
This document outlines the design and magnetic measurement results of the MBXW001 prototype magnet, intended for installation in the LHC. Key specifications include the symmetrical layout of IR1 (ATLAS) and IR5 (CMS), a flux density range of 0.08 to 1.48 T, and operational currents up to 830 A. With a weight of 11.5 T, the magnet features two coils of 48 turns of copper conductor. Magnetic field quality measurements using a Hall probe array are included, demonstrating field integral quality within acceptable limits. Measurements were conducted at CERN in May 2003.
E N D
MBXW MBXW 01 (prototype)
IR1 and IR 5 Layout IP 1 IP5 D1 : 6 X MBXW 83.5 m 0 m 59 m Distance between the 2 beams : 19 mm IR 1 Left and Right are symmetrical IR 5 Left and Right are symmetrical
MBXW Side view z
Y X 2 coils of 48 turns Cu conductor section : MBXW Section view
MBXW • 25 magnets will be installed in the LHC : - 12 magnets in the experimental IR 1 (ATLAS) - 12 magnets in the experimental IR 5 (CMS) - 1 magnet in the experimental IR 8 (LHCb) • Flux density : - operating : 0.08 to 1.38 T - ultimate : 1.48 T • Current : - Nominal at B= 1.48T : ~ 750 A - Ultimate: 830 A • Weight : 11,5 T
MBXWmagnetic measurement • Magnetic measurement with a Hall probe array at BINP Field quality Hall probe X
MBXW Field integral quality, in the good field region (+/-41 mm) at 1.38 T ( 750 A ) 2 10-4at 0.08 T (not measurable) 510-4
Magnetic Measurements of MBXW001 magnet (May 2003) at CERN- ABSOLUTE - 5 coils mole
Magnetic Measurements of MBXW001 magnet (May 2003) at CERN - COMPENSATE - 5 coils mole