1 / 13

Computer Modeling of a Large Fan-Shaped Auditorium

Computer Modeling of a Large Fan-Shaped Auditorium. Heather Smith Timothy W. Leishman. Acoustics Research Group Department of Physics & Astronomy Brigham Young University. Auditorium Characteristics. Large Seats 21,000 people Volume = 11,400,000 cu. ft Fan-shaped

kimama
Download Presentation

Computer Modeling of a Large Fan-Shaped Auditorium

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Computer Modeling of a Large Fan-Shaped Auditorium Heather Smith Timothy W. Leishman Acoustics Research Group Department of Physics & Astronomy Brigham Young University

  2. Auditorium Characteristics • Large • Seats 21,000 people • Volume = 11,400,000 cu. ft • Fan-shaped • Curved and concavely oriented surfaces toward the rear of the hall based primarily on one center of curvature • Coupled Spaces • Large cavity behind the rostrum • Large cavity above the canopy ceiling • Transparent surfaces • Façade side walls • Façade ceiling • Large skylights

  3. Challenges in Modeling this Auditorium • Large number of faces • Curved surfaces approximated with planar surfaces • Sensitive to absorption & scattering coefficients • Large surfaces • “If in doubt, try with both high and low values [for scattering coefficients] and see if the results are sensitive or not (it depends on the hall shape and the absorption distribution and is very difficult to know in advance).” - Bengt-Inge Dalenbäck (CATT user’s web page) • Coupled room • Transmission coefficients for some surfaces

  4. Absorption Coefficients • Used published absorption coefficients when possible • Otherwise estimated values using similar materials or rough averaging • Used cumulative absorption curves to determine contributions of surfaces to total absorption • Because of their contributions to total absorption, larger surfaces are very sensitive to absorption coefficient choices

  5. Scattering Coefficients • Little or no published data on scattering coefficients for surfaces • Approximating scattering coefficients • Use approximations suggested by various authors • Measure surface dimensions and compare to the wavelength • Limitations of approximations • Do not specify which three-dimensional surface dimension(s) to use • Vague in assignment of scattering coefficient values based on the wavelength/surface dimension ratio

  6. Comparisons CATT Model EASE Model Measured

  7. Source: Omnidirectional loudspeaker Receiver: KEMAR manikin with microphones at opening of artificial ear canal

  8. Refining Absorption in the Model • Experimentally measure absorption coefficients for surfaces that have a large effect on total absorption • Seats • Seated Audience • Ceiling treatment

  9. Refining Scattering in the Model • Work to obtain better scattering coefficient values for important surfaces (i.e., seats, seated audience) • Experimental • Measure scattering coefficients in reverberation chamber using proposed standard ISO/DIS 17497-1 • Numerical • Use BEM package to predict scattering coefficients • Analytical • Solutions for arrays of simple scatterers (e.g. spheres)

  10. Conclusions • It appears to be feasible to model a very large hall using commercial geometric acoustics packages • Models need more refining in order to better match the measured results • Additional work is needed to determine more accurate values for scattering and absorption coefficients of surfaces

More Related