ece 8830 electric drives l.
Download
Skip this Video
Loading SlideShow in 5 Seconds..
ECE 8830 - Electric Drives PowerPoint Presentation
Download Presentation
ECE 8830 - Electric Drives

Loading in 2 Seconds...

play fullscreen
1 / 43

ECE 8830 - Electric Drives - PowerPoint PPT Presentation


  • 308 Views
  • Uploaded on

ECE 8830 - Electric Drives. Topic 3 : Induction Motor Modeling - Steady State Spring 2004. Introduction. Induction machines are the most widely used of all electric motors. They offer the following attractive features:

loader
I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
capcha
Download Presentation

PowerPoint Slideshow about 'ECE 8830 - Electric Drives' - khanh


An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript
ece 8830 electric drives

ECE 8830 - Electric Drives

Topic 3: Induction Motor Modeling -

Steady State

Spring 2004

introduction
Introduction

Induction machines are the most widely used of all electric motors. They offer the following attractive features:

  • Generally easy to build and cheaper than corresponding dc or synchronous motors
  • Rugged and require little maintenance
  • Offer reasonable asynchronous performance
  • A manageable torque-speed curve
  • Stable operation under load
  • Generally satisfactory efficiency
  • Range in size from few Watts to several MW
introduction cont d
Introduction (cont’d)

Some disadvantages of induction motors are:

  • Speeds not as easily controlled as dc motors
  • Draw large starting currents, typically 6-8 x their full load values
  • Operate with a poor lagging power factor when lightly loaded
introduction cont d4
Introduction (cont’d)

New designs for high performance induction machines, such as in high speed motors for gas compressors, will be required to have new characteristics from existing machines, it is important to have a good fundamental understanding of these types of machines.

Goal: To develop a “simple” model for the induction machine that is useful for control and simulation.

structure of an induction machine
Structure of an Induction Machine

Two types of induction machine:

Wound rotor or squirrel cage rotor

rotating magnetic field and slip
Rotating Magnetic Field and Slip

We previously showed that a balanced set of three-phase currents flowing in a set of symmetrically placed, three-phase stator windings produces a rotating mmf given by:

[eq. (6.1) Ong, eq. (2.9) Bose]

where ae is the electrical angle measured from the a-phase axis and e is the angular speed of the stator mmf in electrical radians/second.

rotating magnetic field and slip cont d8
Rotating Magnetic Field and Slip (cont’d)

In mechanical radians/sec. the synchronous speed is related to the electrical speed by:

If the rotor is rotating at an angular speed rm the slip speed is simply equal to sm - rm. The “slip”,s, is the normalized slip speed and is given by:

torque production
Torque Production

The torque produced by an induction motor may be derived and expressed by the following equation: (see ref. [1] in Bose)

where P= # of poles

l = axial length of motor

r = radius of motor

Bp= peak air-gap flux density

Fp= peak value of rotor mmf

and

per phase equivalent circuit model
Per-Phase Equivalent Circuit Model

A per-phase transformer-like equivalent circuit is shown below:

per phase equivalent circuit model cont d
Per-Phase Equivalent Circuit Model (cont’d)

Synchronously rotating air gap flux wave generates a counter emf Vm. This in turn is converted to a slip voltage in the rotor phase, Vr’ = nsVm, where n=rotor:stator turns ratio, and s=normalized slip.

Stator terminal voltage, Vs = Vm + VRs +VLls

where VRs=voltage drop across stator resistance (Rs) and VLls=voltage drop across stator leakage inductance (Lls).

per phase equivalent circuit model cont d12
Per-Phase Equivalent Circuit Model (cont’d)

Excitation current, I0 = Ic + Im

where Ic is core loss current (=Vm/Rm)

and Im is magnetizing current (=Vm/ )

Rotor-induced voltage, Vr’ = VRr’ + VLl’

where VRr’ = voltage drop across rotor resistance

and VLl’ = voltage drop across rotor leakage

inductance

The induced voltage in the rotor leads to a rotor

current Ir’ at slip frequency sl.

per phase equivalent circuit model cont d13
Per-Phase Equivalent Circuit Model (cont’d)

The stator current, IS = I0 + Ir

where Ir is the rotor-reflected current induced in the stator.

I0

per phase equivalent circuit model cont d16
Per-Phase Equivalent Circuit Model (cont’d)

Torque expression can be written as:

where = peak value of air gap flux

linkage/pole

and = peak value of rotor current

per phase equivalent circuit model power expressions
Per-Phase Equivalent Circuit Model: Power Expressions

Input Power: where cos is input PF

Stator copper loss:

Rotor copper loss:

Core loss:

Power across air gap:

Output power:

Shaft Power: where PFw is friction and windage power loss

per phase equivalent circuit model torque expression
Per-Phase Equivalent Circuit Model: Torque Expression

The torque can be expressed as:

where is the rotor

mechanical speed (radians/sec.)

per phase equivalent circuit model torque expression cont d
Per-Phase Equivalent Circuit Model: Torque Expression (cont’d)

Using a little algebra (see Bose) it can

be shown that the torque may be further

expressed as:

where .

This torque expression is similar to that for

a dc motor, where Im = magnetizing

component of stator current and Ia =

armature component of stator current.

simplified per phase equivalent circuit
Simplified Per-Phase Equivalent Circuit

A simplified circuit dropping Rm and shifting Lm to the input is applicable to integral horsepower machines.

Performance of this equivalent circuit is typically within 5%.

simplified per phase equivalent circuit model cont d
Simplified Per-Phase Equivalent Circuit Model (cont’d)

The current Ir in this circuit is given by:

The torque of the motor using this circuit

is given by:

flowchart for computing steady state performance of induction motor
Flowchart for Computing Steady State Performance of Induction Motor

Ref: R. Krishnan,

“Electric Motor Drives”

torque speed curve of induction motor
Torque-Speed Curve of Induction Motor

The torque-speed curve as a function of slip can be calculated from the equation two slides back.

torque speed curve of induction motor cont d
Torque-Speed Curve of Induction Motor (cont’d)

Three regions in torque-speed curve:

1) Plugging (braking) region (1<s<2)

Rotor rotates opposite to direction of air gap flux. Can happen, for example, if stator supply phase sequence reversed while rotor is moving.

2) Motoring region (0<s<1)

Te=0 at s=0. As s increases (speed decreases), Te increases until max. torque (breakdown torque) is reached. Beyond this point, Te decreases with increasing s.

torque speed curve of induction motor cont d26
Torque-Speed Curve of Induction Motor (cont’d)

3) Regenerating Region (s<0)

Here the induction machine acts as a generator. Rotor moves faster than air gap flux resulting in negative slip.

torque speed curve of induction motor cont d27
Torque-Speed Curve of Induction Motor (cont’d)

Ref: R. Krishnan,

“Electric Motor Drives”

performance characteristics of induction motor
Performance Characteristics of Induction Motor

Ref: R. Krishnan, “Electric Motor Drives”

starting torque of induction motor
Starting Torque of Induction Motor

The starting torque of an induction motor is given by substituting for s=1 and is given by:

starting torque of induction motor cont d
Starting Torque of Induction Motor (cont’d)

This torque can be enhanced for line start motors (ones started directly with full line voltage) by increasing the rotor resistance. This can be achieved by connecting external resistors in the case of slip ring rotors. However, with squirrel cage rotors where the rotor is shorted, deep bar or double-cage rotors can be used to increase starting torque.

characterizing induction motors
Characterizing Induction Motors

One way to characterize an induction motor is with the No-load/blocked rotor tests which yield the per-phase equivalent circuit model shown earlier (see figure below).

ias

iar

vas

=M

characterizing induction motors cont d
Characterizing Induction Motors (cont’d)

We can characterize an induction motor with the variables Rs, Lls, M, Llr, Rr determined through lab tests using balanced 3 excitation.This circuit described the impedance perceived per phase on a line-neutral connected machine. Everything in the dashed box is a rotor quantity that has been “referred” to the stator by the ideal transformer in the machine model. From now on, assume that Llr, Rr and iar are referred to the stator.

characterizing induction motors cont d33
Characterizing Induction Motors (cont’d)
  • No-Load Test (s=0)

Equivalent circuit:

Ref: R. Krishnan, “Electric Motor Drives”

characterizing induction motors cont d34
Characterizing Induction Motors (cont’d)
  • No-Load Test (s=0) yields:

In sinusoidal steady state, ignoring resistances:

But -ias = (ibs+ics)

From transformer model:

Las

=>

characterizing induction motors cont d35
Characterizing Induction Motors (cont’d)
  • Blocked rotor test (s=1) yields estimates of Lls and Llr. Equivalent circuit at standstill is shown below:

Ref: R. Krishnan, “Electric Motor Drives”

characterizing induction motors cont d36
Characterizing Induction Motors (cont’d)
  • Ohmmeter/Power loss tests give Rs

and Rr.

So, with Llr, Rr and all ir’s understood as

referred rotor quantities, the “stator-side”

tests identify all the model parameters for

the induction motor.

nema classification of induction motors
NEMA Classification of Induction Motors

The National Electrical Manufacturers Association (NEMA) has classified induction motors based on their torque-slip characteristics. (see text for details)

voltage equations
Voltage Equations

Stator Voltage Equations:

voltage equations cont d
Voltage Equations (cont’d)

Rotor Voltage Equations:

model of induction motor
Model of Induction Motor

To build up our simulation equation, we could just differentiate each expression for , e.g.

But since Lsr depends on position,

which will generally be a function of time, the trig. terms will lead to a mess!

Park’s transform to the rescue!

[first row of matrix]