1 / 17

STATESMAN Campers, Raising the standards.

STATESMAN Campers, Raising the standards. STATESMAN XP- 2. STATESMAN XP- 2. TRAILER SIZE AND WEIGHT. Overall dimension (mm): 4535x1750x1180(+100mm high luggage rack) (LxWxH) Outer box size (mm): 2205x1750x637 (LxWxH) Inner box size (mm): 2100x1680x450 (LxWxH)

kgrissom
Download Presentation

STATESMAN Campers, Raising the standards.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. STATESMAN Campers, Raising the standards. STATESMAN XP-2

  2. STATESMAN XP-2

  3. TRAILER SIZE AND WEIGHT Overall dimension (mm): 4535x1750x1180(+100mm high luggage rack) (LxWxH) Outer box size (mm): 2205x1750x637 (LxWxH) Inner box size (mm): 2100x1680x450 (LxWxH) Distance from trailer top to the ground: 1180mm Ground clearance: 543mm Trailer tare mass: 900kg Reference VSB-1 GTM: 1700 KG, Reference VSB-1 ATM: 1800 KG, Reference VSB-1

  4. TRAILER DRAW BAR AND CHASSIS TUBE Extended/reinforced drawbar of 3000mm long, drawbar tube size: 100x50x3mm tube (heavy duty), fully welded to chassis, chassis: 70x50x3mm tube Draw bar & trailer frames hot-dipped galvanized.

  5. TRAILER BODY CONSTRUCTION AND MATERIALS Trailer panel walls: 1.5mm thick flat cold-pressed steel plate, powder coated. All hinges, latches, fasteners are stainless steel Inside and outside of box top: Aluminum checker plate: 1.5mm thick Trailer box top insulated

  6. TRAILER SUSPENSION AND WHEEL • Independent coiled suspension with dual gas shock absorbers • 10” electric brakes with hand braking system • Off road all terrain wheels: • 3x15” wheels, steel powder coated rims and 235/75R15 tyres, 6-stud pattern, including 1x Spare wheel mounted under chassis at trailer rear

  7. TRAILER DETAILS & ACCESSORIES Safety chains: Hot-dipped galvanized, comply with Australian standard 4177 with Australian standard markings Hitch: Treg poly block hitch, loading capacity: 2000KG, unit weight: 10KG, complies with Australian standard, with Australian standard markings Jockey wheel: Swing up type with 10” solid wheel Winch: PP webbing 8m to close camper, loading capacity: 1000KG, heavy duty winch support

  8. TRAILER DETAILS & ACCESSORIES Stone guard: Hot-dipped galvanized stone guard with PVC mesh Hot-dipped galvanized 2XGas bottle holders: Standard 9KG gas bottle holders Hot-dipped galvanized 2X20L Jerry can holders Large powder coated steel tool box, size: 1565x1180x550mm (LxWxH) Slide out draw for fridge left side of the large toolbox, maximum fridge size Maximum : 770x560x420 (LxWxH)

  9. TRAILER DETAILS & ACCESSORIES The fridge sample as shown is: 40L, 560x380x420mm (LxWxH) Slide out storage drawer left side of the large toolbox, size: 640X640X200mm (LXWXH)

  10. TRAILER DETAILS & ACCESSORIES Gas struts: fitted for lifting bed base, extra heavy duty gas struts for safe folding

  11. TENT AND ANNEX

  12. TRAILER DETAILS & ACCESSORIES Locks and keys: all access doors hinges and locks are stainless steel, water proof and dust sealed Storage compartments fully sealed & lockable, located left side & right side of the rear of trailer box, for storage equipment 4 wind down rear stabilizer legs & adjusting spanner Two luggage racks, hot-dipped galvanized; 1 on top of the large tool box, 1 on top of the trailer box

  13. TRAILER KITCHENETTE Water tank: 90L stainless steel water tank, size: 1000X520X180mm (LXWXH) 12V Electric water pump, allluminiumchecker plate cover over water pump. High quality stainless steel filler cap Kitchen: kitchen top and stainless steel kitchen sink; 1Xdrawer in kitchen, high quality lockable sliding rails

  14. TRAILER ELECTRIC SET-UP • Wiring harness under trailer concealed in steel conduit • Wire cable: standard 7-core wire cable • 4 LED tail Lights, 1 number plate light, number plate holder • 2 Reflectors: white on front of the large tool box 

  15. TRAILER ELECTRIC SET-UP 2 Tent bar lights and switch. 1 Cooking area light 3X12V outlets (1 beside the kitchen, 2 under tent bed) Tent: 14OZ tent with double roof

  16. ACCESSORIES Jerry can. Gas stove/ BBQ Fridge Alloy wheels Battery

  17. Vehicle standards bulletin VSB-01 12.5 Aggregate Trailer Mass (ATM) ATM is the total mass of the trailer when carrying the maximum load recommended by the manufacturer. This includes mass imposed onto the towing vehicle when the combination vehicle is resting on a horizontal supporting plane. 12.6 Gross Trailer Mass (GTM) GTM is the mass transmitted to the ground by the tires of the trailer when coupled to a towing vehicle and carrying the maximum load recommended by the manufacturer or importer, approximately uniformly distributed over the load bearing area. 12.7 Tare Mass Tare Mass is the total mass of the trailer when not carrying any load, but when ready for service, unoccupied (if relevant) and with all fluid reservoirs (if fitted) filled to nominal capacity except for fuel, which shall be 10 liters only, and with all standard equipment and any options fitted. This includes any mass imposed onto the drawing vehicle when the combination vehicle is resting on a horizontal supporting plane. (Fluid reservoirs do not include water tanks and waste water tanks fitted to caravans).

More Related