1 / 4

Check Point Threat Prevention Specialist (CTPS) 156-590 Dumps

Easily download the Check Point Threat Prevention Specialist (CTPS) 156-590 Dumps from Passcert to keep your study materials accessible anytime, anywhere. This PDF includes the latest and most accurate exam questions and answers verified by experts to help you prepare confidently and pass your exam on your first try.

kevin314
Download Presentation

Check Point Threat Prevention Specialist (CTPS) 156-590 Dumps

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Download Valid Check Point 156-590 Exam Dumps For Best Preparation Exam : 156-590 Title : Check Point Certified Threat Prevention Specialist (CTPS) https://www.passcert.com/156-590.html 1 / 4

  2. Download Valid Check Point 156-590 Exam Dumps For Best Preparation 1.Task: Verify the enabled Software Blades on a Check Point Security Gateway. A. See the Explanation. Answer: A Explanation: 1. SSH into the Security Gateway. 2. Run the command: cplic print to check license details. 3. Use: enabled_blades or cpstat os to verify enabled blades. 4. Confirm Threat Prevention blades like IPS, Anti-Bot, and Anti-Virus are listed. 5. Use SmartConsole > Gateway > General Properties to visually confirm the same. 2.Task: Validate the Threat Prevention policy is applied correctly to a Security Gateway. A. See the Explanation. Answer: A Explanation: 1. Open SmartConsole > Threat Prevention > Policy. 2. Ensure the policy is assigned to the correct Gateway. 3. Publish and Install the policy. 4. SSH into the Gateway and run: fw stat to confirm active policy name. 5. Cross-verify that Threat Prevention blades are enforcing the loaded policy. 3.Task: Use CLI to test the management server connectivity from the Security Gateway. A. See the Explanation. Answer: A Explanation: 1. SSH into the Security Gateway. 2. Ping the management server: ping . 3. Check hostname resolution: nslookup . 4. Confirm SIC is established: cp_conf sic state. 5. Check for outbound connectivity on port 18210 (CPD). 4.Task: Confirm that Security Management Server is operational. A. See the Explanation. Answer: A Explanation: 1. SSH into the Management Server. 2. Check processes: cpwd_admin list. 3. Validate services: cpstat mg. 4. Confirm GUI is accessible via SmartConsole. 5. Run: netstat -an | grep 19009 to ensure GUI port is open. 5.Task: Check Secure Internal Communication (SIC) status between Management Server and Gateway. A. See the Explanation. Answer: A Explanation: 2 / 4

  3. Download Valid Check Point 156-590 Exam Dumps For Best Preparation 1. On Management, open SmartConsole > Gateways. 2. Right-click the gateway > Test SIC status. 3. CLI: Run cp_conf sic state on the gateway. 4. Check logs in $FWDIR/log/sic.log. 5. Re-initialize SIC if needed via SmartConsole or CLI. 6.Task: Identify Threat Prevention logs in SmartConsole. A. See the Explanation. Answer: A Explanation: 1. Open SmartConsole > Logs & Monitor. 2. Set a filter: blade:"IPS" or blade:"Anti-Bot". 3. Review recent events with timestamps. 4. Double-click logs for detailed packet info. 5. Verify policy name and action taken. 7.Task: Confirm proper DNS resolution from the Security Gateway. A. See the Explanation. Answer: A Explanation: 1. SSH into the Gateway. 2. Run: nslookup checkpoint.com. 3. Validate /etc/resolv.conf for correct DNS servers. 4. Test with dig or host command. 5. Ensure outbound UDP/53 traffic is not being blocked. 8.Task: Validate NTP synchronization on Security Gateway. A. See the Explanation. Answer: A Explanation: 1. SSH into the Gateway. 2. Run: ntpstat or ntpq -p. 3. Verify synchronization status is “synchronized.” 4. Confirm configured server in /etc/ntp.conf. 5. Ensure outbound UDP port 123 is open. 9.Task: Confirm Internet access from the Security Gateway. A. See the Explanation. Answer: A Explanation: 1. SSH into the Gateway. 2. Use curl https://www.google.com. 3. Check route table via netstat -rn or ip route. 4. Ensure DNS is resolving (as in Q07). 3 / 4

  4. Download Valid Check Point 156-590 Exam Dumps For Best Preparation 5. Check NAT policy allows outbound Internet access. 10.Task: Validate Anti-Bot blade updates on the Gateway. A. See the Explanation. Answer: A Explanation: 1. SSH into the Gateway. 2. Run: cpstat threat-emulation and cpstat anti-bot. 3. Check SmartConsole > Gateways > Updates tab. 4. Validate signature update timestamps. 5. Ensure outbound connectivity to Check Point update servers. 11.Task: Troubleshoot policy installation failure. A. See the Explanation. Answer: A Explanation: 1. In SmartConsole, attempt policy install again and note error. 2. View install_policy.elg in $FWDIR/log/. 3. Verify SIC is active. 4. Ensure policy contains no rulebase errors. 5. Re-push after resolving syntax or connectivity issues. 12.Task: Enable SSH and HTTP monitoring on Gateway. A. See the Explanation. Answer: A Explanation: 1. SSH into the Gateway. 2. Run: cpconfig and choose “Enable WebUI.” 3. Open firewall rule for ports 22 and 443. 4. Confirm access via browser and SSH client. 5. Check SmartConsole > Logs for connection attempts. 13.Task: Use CLI to check ThreatCloud status. A. See the Explanation. Answer: A Explanation: 1. SSH into Gateway. 2. Run: tecli show cloud status. 3. Look for Status: Connected. 4. Check logs in /opt/CPsuite-R81/fw1/log/te.log. 5. Ensure outbound HTTPS to ThreatCloud servers is allowed. 4 / 4

More Related