1 / 15

Optimizing Your Grain Harvesting System

Optimizing Your Grain Harvesting System . Sam G. McNeill Extension Agricultural Engineer UKREC Princeton, KY 270-365-7541 x 213 smcneill@ca.uky.edu. Biosystems and Agricultural Engineering. Information for Combine(s). Harvesting rate (bu/h) Capacity of grain tank (bu)

kesler
Download Presentation

Optimizing Your Grain Harvesting System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Optimizing Your Grain Harvesting System Sam G. McNeill Extension Agricultural Engineer UKREC Princeton, KY 270-365-7541 x 213 smcneill@ca.uky.edu Biosystems and Agricultural Engineering

  2. Information for Combine(s) • Harvesting rate (bu/h) • Capacity of grain tank (bu) • Unloading rate (bu/min) • Stationary/mobile unloading? • Up to 10 combines

  3. Data for Hauling Vehicle(s) • Type of vehicle • Cart, wagon, truck, trailer • Hauling capacity (bu) • Unloading rate (bu/min) • Travel time from field to bins • Up to 20 trucks

  4. End of Day Operation

  5. Elevator Delivery Option

  6. On-Farm Handling Equipment • Receiving pit/hopper (bu) • Wet grain auger/leg (bu/h) • Wet holding bin (bu) • Dry grain conveyor/leg (bu/h) • Surge bin (between dryer and leg/conveyor) (bu)

  7. Dryer Types • Storage only (no drying) • Bin Dryers (bu/d) • Layer • Batch/continuous -in-bin • High speed dryers (bu/h) • Automatic Batch • Continuous Flow

  8. Layer & Batch/Bin Dryers • Drying capacity (bu/day) • Size of bin/fan • Depth of grain • Drying air temp. / r.h. • Initial/final corn moisture • Unloading rate (b/h)

  9. Automatic Batch Dryers • Drying capacity (bu/h) • Drying air temp. / r.h. • Amount of air (cfm/bu) • Initial/final corn moisture • Holding capacity (bu) • Load/unload time (min)

  10. Continuous Flow Dryers • Drying capacity (bu/h) • Drying air temp. / r.h. • Amount of air (cfm/bu) • Initial/final corn moisture • Holding capacity (bu)

  11. Sizing Dryers • operate 20 hours/day for your harvest moisture • (20%+) allows for wet seasons /harvest pressure • Expl: for a harvest rate of 12,000 bu/day, select a 600 b/h dryer at 7-10 points of moisture removal

  12. Sizing Wet Holding Bins • Wet tanks should be large enough to hold ~ 1.5 x EOD capacity, for example… • Combine cap. = 12,000 bu/day • Dryer capacity = 8,000 bu in 20 h • Difference is 4000 bu/day • Wet tank should be 5000 bu

  13. Sizing Surge Bins • Base size on time to collect amount of dry grain x 1.2 • Expl: for a 300 b/h dryer that will be serviced by a 1500 b/h leg used to unload a 600 bu truck…the leg will need 24 min. to unload the truck • Surge bin should be 145 bu(0.4 h * 300 b/h * 1.2)

  14. Effect of component size on combine efficiency

  15. Conclusion • Use available computer programs to evaluate system performance • Good system design will be limited by the combine • Plan for future expansion so that equipment replacement / upgrades are cost effective

More Related