Using tsb 88 region 5 700 mhz
Download
1 / 11

Using TSB-88 Region 5 700 MHz - PowerPoint PPT Presentation


  • 139 Views
  • Uploaded on

Using TSB-88 Region 5 700 MHz. Using TSB-88 to insure frequency usage does not cause interference in Region 5. TSB-88 Purpose.

loader
I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
capcha
Download Presentation

PowerPoint Slideshow about 'Using TSB-88 Region 5 700 MHz' - kent


An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript
Using tsb 88 region 5 700 mhz

Using TSB-88 Region 5 700 MHz

Using TSB-88 to insure frequency usage does not cause interference in Region 5


Tsb 88 purpose
TSB-88 Purpose

  • Accommodating the design and frequency coordination of bandwidth efficient narrowband technologies likely to be deployed as a result of the Federal Communications Commission "Spectrum Refarming“ efforts;

  • Assessing and quantifying the impact of new narrowband/bandwidth efficient digital and analog technologies on existing analog and digital technologies;

  • Assessing and quantifying the impact of existing analog and digital technologies on new narrowband/bandwidth efficient digital and analog technologies;

  • Addressing migration and spectrum management issues involved in the transition to narrowband/bandwidth efficient digital and analog technologies. This includes developing solutions to the spectrum management and frequency coordination issues resulting from the narrow banding of existing spectrum considering channel spacing from 30 and 25 kHz to 15, 12.5, 7.5, and 6.25 kHz;

  • Information on new and emerging Land Mobile bands such as the 700, 800 and 900 MHz bands;

  • Preliminary information on narrowband; wideband data, 25, 50, 100 and 150 kHz channel bandwidths; and

  • Address the methodology of minimizing intra system interference between current or proposed Noise Limited Systems in spectral and spatial proximity to Interference Limited Systems.


Tsb 88 guidance
TSB -88 Guidance

  • Establishment of standardized methodology for modeling and simulating narrowband/bandwidth efficient technologies operating in a post "Refarming" environment;

  • Recommended databases and propagation models that are available for improved results from modeling and simulation;

  • Establishment of a standardized methodology for empirically confirming the performance of narrowband/bandwidth efficient systems operating in a post "Refarming" environment or in new frequency band allocations, and;

  • Combining the modeling, simulation and empirical performance verification methods into a unified family of data sets or procedures which can be employed by frequency coordinators, systems engineers, system operators or software developers


Some terms
Some Terms

  • Channel Performance Criterion (CPC): The maximum BER at a specified vehicular Doppler rate necessary to deliver a specific DAQ for the specific modulation. The recommended CPC form is Cf/N or Cf/(I+N) @ X Hz Doppler.

  • Confidence Interval: A statistical term where a confidence level is stated for the probability of the true value of something being within a given range which is the interval.

  • Confidence Level: also called Confidence Coefficient or Degree of Confidence,the probability that the true value lies within the Confidence Interval.

  • CPC Service Area Reliability: The CPC Service Area Reliability is the probabilityof achieving the desired DAQ over the defined Service Area.

  • DAQ: The acronym for Delivered Audio Quality, a reference similar to Circuit Meritwith additional definitions for digitized voice and a static SINAD equivalent intelligibility when subjected to multipath fading.


Some more terms
Some More Terms

  • Equivalent Noise Bandwidth (ENBW): The frequency span of an ideal filter whose area equals the area under the actual power transfer function curve and whose gain equals the peak gain of the actual power transfer function. In many cases, this value could be close to the 3- dB bandwidth. However, there exist situations where the use of the 3- dB bandwidth can lead to erroneous results. Sometimes ENBW is referred to as Effective Noise Bandwidth.

  • Interference Limited: The case where the CPC is dominated by the Interferencecomponent of C/(I+N).

  • Noise Limited: The case where the CPC is dominated by the Noise component ofC/(I+N).

  • Service Area: The specific user’s geographic bounded area of concern. Usually a political boundary such as a city line, county limit or similar definition for the users business. Can be defined relative to site coordinates or an irregular polygon where points are defined by latitude and longitude. In some Public Safety systems the Service Area could be greater than their Jurisdictional Area. This is done to facilitate interference mitigation or allow simulcasting without violating regulatory contour regulations.


So what do we want to do
So What Do We Want To Do?

  • Given an existing system(s) and a new proposed site(s), we desire to protect all parties from harmful interference

  • The systems will work in an interference limited environment


How do we do that
How Do We Do That?

  • We first define a minimum signal; median signal level for all service areas

  • Given the system modulation type, we determine a maximum interfering mean signal level that the system can tolerate in the service area

  • More specifically, we determine from TSB-88 Annex A the desired to undesired signal ratio in db needed to protect the system


Noise Limited Operation

-105.9 dBm DAQ 3.4 level

17.7 dB

-116 dBm Reference Sensitivity

7.6 dB

Noise Floor -123.6 dBm


Interference limited
Interference Limited

  • To get better reuse we work with interference limited operations.

  • Therefore coverage area needs minimum 40 dBu throughout the coverage area

  • Interference must be at least the VCPC value for 3.4 DAQ


Comstudy parameters
ComStudy Parameters

  • Longley/Rice – Median (50%) values plus defaults on other parameters

  • Map – Sized to show co and adjacent channel users service areas

  • No additional land use attenuation

  • Set Transmit Box parameters to Interference, Equivalent, Selected, T out, 40.0 MinFS, 3.4 DAQ, and Map limited

  • For each existing Site, in turn, select the new site and existing site and select “V”for the existing site . Click redraw – label and print the map.


For first in agencies
For First in Agencies

  • If there are no existing co-channel users then –

  • Produce map using Longley/Rice 50% values and default values

  • Use colors to show 40 and 20 dBu tiles

  • Remember it is your responsibility to design your coverage to a minimum of 40 dBu in your service area and to minimize to the extent possible, the signal levels outside your service area

  • Be prepared to show how you used – directional antennas, low level sites and terrain shielding to minimize signal level outside of your coverage area


ad