1 / 9

DAS LCD Replacement procedures

DAS LCD Replacement procedures. Ver2.00  29/Nov/2013 BMB International Corp. www.bmb.com. １． Remove the top cover. ■ Tool to use 　　　＋ P1 screwdriver. ① Remove the screws on each three left and right. ③. ② Remove the two screws back. ③ Remove the top cover.

kennan
Download Presentation

DAS LCD Replacement procedures

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DAS LCD Replacement procedures Ver2.00  29/Nov/2013 BMB International Corp. www.bmb.com

  2. １．Remove the top cover ■Tool to use 　　　＋ P1screwdriver ① Remove the screws on each three left and right. ③ ② Remove the two screws back. ③ Remove the top cover.

  3. ２．フロントカバーを外すRemove the front cover ①Remove the MUSIC and MIC volume knob. ② Remove the screws on the fourth each the top and bottom of the front panel. ③ ③ Remove the screws on each one left and right. ③

  4. ２．　Remove the front cover ④ Remove the both side of LCD connecter. Take out the flat cable on the lower. ④ ④ ⑤ Move the front covertoward you carefully. Pull the cable from white connect. ※There is the white connect between front cover and front chassis. Please move the cover carefully. ⑤ ⑥ Remove the front cover from the body.

  5. 3．Remove the LCD ■Tool to use -Dedicated tool -Ruler of Steel ① ① Put in the ruler of steel between the center of LCD and body . ② In addition,Put in the dedicated tool between LCD and the body. Move the hook and make space a little. Please be careful the four hooks are easy to break. ②

  6. 3．Remove the LCD ③ Move the ruler of steel. And put a ruler of steel between the LCD panel and body. ④ Slowly push the ruler of steel . And float the LCD. ③ ④ ⑤ ⑤ Slid slowly dedicated tool.

  7. 4．Replacing the LCD ① Peel off the protective sheet of the LCD. 　・LCD protection sheet 　・Double-sided tape protection sheet ② Put the New LCD from back of front cover. ③ Push the LCD until the four hooks are locked.

  8. ５．Put the front cover ① Connect the white cable. Please check the cable are connected. ② ② ②Put the flat cable to connecter, and lock the both side of lock.

  9. ７．Put the front cover ③Drive the screws on each one left and right. ④ ④ ④ ④ ④ Drive the screws on the fourth each the top and bottom of the front panel. ⑤ Put the MUSIC and MIC volume knob. ④ ④ ④ ④ ⑧ ⑧ ⑥ ⑥ Put the top cover. ⑥ ⑧ ⑧ ⑧ ⑧ ⑦ Drive the two screws back. ③ ⑦ ⑧ ⑧ Drive the screws on each three left and right. ⑧ ⑦ ⑧ ⑧

More Related