1 / 13

High Efficiency Unit Heaters

High Efficiency Unit Heaters. Workpaper Presentation Prepared for Cal TF Presentation Sept 24, 2014. Overview. Seeking TF approval of draft workpaper Measure Description Measure Summary Abstract Review Comments – Cal TF Abstract Review Comments – Commission Staff

kenna
Download Presentation

High Efficiency Unit Heaters

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. High Efficiency Unit Heaters Workpaper Presentation Prepared for Cal TF Presentation Sept 24, 2014

  2. Overview • Seeking TF approval of draft workpaper • Measure Description • Measure Summary • Abstract Review Comments – Cal TF • Abstract Review Comments – Commission Staff • CEUS data: SCE vs. statewide • EFLH: Connected vs. peak load, other considerations • Savings: WP vs DEER • IMC

  3. Measure Description • Unit Heater • Self-contained, automatically-controlled, vented fan-type gas space heater designed to be installed without ducts, within the heated space • Thermal Efficiency: 90% or above (11% improvement) • Size ranging 50~600 kBtuh • Measure Application Type • ROB/NC • Measure Delivery Type • Prescriptive rebate per kBtuh • Impacted Market • Non-residential • Warehouses, distribution facilities, garages, loading docks, & etc. • Market Potential • Low shipping volume in CA

  4. Measure Summary • Gas Savings • 0.38 therms/kBtuh (CA average) • Range between 0.17 ~ 0.87 therm/kBtuh for 16 CZs • Decreased by a factor of 2.85 (peak load vs. connected load) • IMC • $8.17/kBtuh • Incremental equipment cost + additional material & labor for condensing unit • EUL • 20 years • DOE shipping data + DEER HVAC-Frnc • Net-to-Gross: • 0.70 default value per DEER All-Default<=2yrs

  5. Abstract Comments– Cal TF • EUL – 20 years • Oversizing • No oversizing factor to be considered • Savings Methodology • Engineering calculation using CEUS and other resources • Building type • Use warehouses • Enclosed space with an appropriate temperature control

  6. Abstract Comments– Commission Staff • Calculating savings based on the actual capacity and climate zones. • Equivalent full load hours highest in SCE • EFLH: • Non-coincident peak heating load vs. Total connected equipment load • Comparison to simplified DEER • Additional Installation Cost

  7. Savings Calculation

  8. CEUS:SCE vs. Statewide • Utilities Areas in CEUS • SCE: Substantially higher consumption (W/H) • SCE: Lower than PG&E (20%) for other building types • Study Sample • 250 warehouses surveyed • 65 sites metered • TF Feedback Requested: Use statewide data?

  9. CEUS: Equivalent Full Load HourPeak Load vs. Connected Load • Peak Load • Calibrated using metered data collected by fan measurements for sample of buildings • One-hour maximum consumption, based on simulated load profile • Connected Load • Gathered from actual site surveys of equipment inventories • Represents how equipment is actually sized and placed for this building type

  10. Equivalent Full Load Hour:Additional Considerations • Operation depends on • Thermostat settings and setback schedules • Bldg. location and climate • Door openings • Ventilation system • Ceiling heights • Internal heating loads • Agreed on “Connected Load”?

  11. Comparison with Simplified DEER • Preliminary analysis using DEER by Commission Staff • Conditioned Storage (SCn) • D08-NE-HVAC-airAC-SpltPkg-240to759kBtuh-9p8eer • Measure Case: HEATING-HIR = 1.11  • Base Case: HEATING-HIR = 1.25 • Are savings reasonable?

  12. Consideration of Cost • Additional labor and supporting material • Site-specific conditions dictating whether installation cost is higher or lower than conventional unit heaters. • Condensate disposal • Replacement of existing flue • Condensate neutralizers, and outdoor-air dampers require periodic servicing • Estimated additional $500 incremental installation cost per unit • IMC: $6.07 (equipment) + $2.10 (installation) = $8.17 / kBtuh

  13. Question or Comment?

More Related