1 / 36

A Level-Set Method for Modeling Epitaxial Growth and Self-Organization of Quantum Dots

Outline Introduction The basic island dynamics model using the level set method Include Reversibility Ostwald Ripening Include spatially varying, anisotropic diffusion self-organization of islands.

kenaz
Download Presentation

A Level-Set Method for Modeling Epitaxial Growth and Self-Organization of Quantum Dots

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Outline • Introduction • The basic island dynamics model using the level set method • Include Reversibility Ostwald Ripening • Include spatially varying, anisotropic diffusion self-organization of islands A Level-Set Method for Modeling Epitaxial Growth and Self-Organization of Quantum Dots Christian Ratsch, UCLA, Department of Mathematics Santa Barbara, Jan. 31, 2005 Collaborators • Russel Caflisch • Xiabin Niu • Max Petersen • Raffaello Vardavas $$$: NSF and DARPA

  2. o What is Epitaxial Growth? epi – taxis = “on” – “arrangement”

  3. Why do we care about Modeling Epitaxial Growth? • Many devices for opto-electronic application are multilayer structures grown by epitaxial growth. • Interface morphology is critical for performance • Theoretical understanding of epitaxial growth will help improve performance, and produce new structures. • Methods used for modeling epitaxial growth: • KMC simulations: Completely stochastic method • Continuum Models: PDE for film height, but only valid for thick layers • New Approach: Island dynamics model using level sets

  4. KMC Simulation of a Cubic, Solid-on-Solid Model F D = G0 exp(-ES/kT) Ddet = D exp(-EN/kT) Ddet,2 = D exp(-2EN/kT) ES: Surface bond energy EN: Nearest neighbor bond energy G0 : Prefactor [O(1013s-1)] • Parameters that can be calculated from first principles (e.g., DFT) • Completely stochastic approach • But small computational timestep is required

  5. Experimental Data Au/Ru(100) Ni/Ni(100) Hwang et al., PRL 67 (1991) Kopatzki et al., Surf.Sci. 284 (1993) KMC Simulations: Effect of Nearest Neighbor Bond EN Large EN: Irreversible Growth Small EN: Compact Islands

  6. KMC Simulation for Equilibrium Structures of III/V Semiconductors Experiment (Barvosa-Carter, Zinck) KMC Simulation (Grosse, Gyure) Similar work by Kratzer and Scheffler Itoh and Vvedensky 380°C 0.083 Ml/s 60 min anneal 440°C 0.083 Ml/s 20 min anneal Problem: Detailed KMC simulations are extremely slow ! F. Grosse et al., Phys. Rev. B66, 075320 (2002)

  7. Outline • Introduction • The basic island dynamics model using the level set method • Include Reversibility Ostwald Ripening • Include spatially varying, anisotropic diffusion • self-organization of islands

  8. Island dynamics Atomistic picture(i.e., kinetic Monte Carlo) F v D • Treat Islands as continuum in the plane • Resolve individual atomic layer • Evolve island boundaries with levelset method • Treat adatoms as a mean-field quantity (and solve diffusion equation) The Island Dynamics Model for Epitaxial Growth

  9. Level Set Function j Surface Morphology j=0 j=0 t j=0 j=1 j=0 The Level Set Method: Schematic • Continuous level set function is resolved on a discrete numerical grid • Method is continuous in plane (but atomic resolution is possible !), but has discrete height resolution

  10. Diffusion equation for the adatom density r(x,t): j=0 • Velocity: • Nucleation Rate: The Basic Level Set Formalism for Irreversible Aggregation • Governing Equation: • Boundary condition: C. Ratsch et al., Phys. Rev. B 65, 195403 (2002)

  11. Typical Snapshots of Behavior of the Model t=0.1 j r t=0.5

  12. Numerical Details • Level Set Function • 3rd order essentially non-oscillatory (ENO) scheme for spatial part of levelset function • 3rd order Runge-Kutta for temporal part • Diffusion Equation • Implicit scheme to solve diffusion equation (Backward Euler) • Use ghost-fluid method to make matrix symmetric • Use PCG Solver (Preconditioned Conjugate Gradient)

  13. Need 4 points to discretize with third order accuracy i+1 i+2 i-1 i i+3 i+4 i-3 i-2 Set 1 Set 2 Set 3 This often leads to oscillations at the interface Fix: pick the best four points out of a larger set of grid points to get rid of oscillations (“essentially-non-oscillatory”) Essentially-Non-Oscillatory (ENO) Schemes

  14. Numerical Details • Level Set Function • 3rd order essentially non-oscillatory (ENO) scheme for spatial part of levelset function • 3rd order Runge-Kutta for temporal part • Diffusion Equation • Implicit scheme to solve diffusion equation (Backward Euler) • Use ghost-fluid method to make matrix symmetric • Use PCG Solver (Preconditioned Conjugate Gradient)

  15. Standard Discretization: • Leads to a symmetric system of equations: • Use preconditional conjugate gradient method Problem at boundary: i i-2 i-1 i+1 ; replace by: Matrix not symmetric anymore : Ghost value at i “ghost fluid method” Solution of Diffusion Equation

  16. Probabilistic Seeding weight by local r2 Fluctuations need to be included in nucleation of islands Nucleation Rate: rmax r C. Ratsch et al., Phys. Rev. B 61, R10598 (2000)

  17. A Typical Level Set Simulation

  18. Outline • Introduction • The basic island dynamics model using the level set method • Include Reversibility Ostwald Ripening • Include spatially varying, anisotropic diffusion • self-organization of islands

  19. Velocity: Nucleation Rate: Extension to Reversibility • So far, all results were for irreversible aggregation; but at higher temperatures, atoms can also detach from the island boundary • Dilemma in Atomistic Models: Frequent detachment and subsequent re-attachment of atoms from islands Significant computational cost ! • In Levelset formalism: Simply modify velocity (via a modified boundary condition),but keep timestep fixed • Stochastic break-up for small islands is important • Boundary condition:

  20. Details of stochastic break-up • For islands larger than a “critical size”, detachment is accounted for via the (non-zero) boundary condition • For islands smaller than this “critical size”, detachment is done stochastically, and we use an irreversible boundary condition (to avoid over-counting) • calculate probability to shrink by 1, 2, 3, ….. atoms; this probability is related to detachment rate. • shrink the island by this many atoms • atoms are distributed in a zone that corresponds to diffusion area • Note: our “critical size” is not what is typical called “critical island size”. It is a numerical parameter, that has to be chosen and tested. If chosen properly, results are independent of it.

  21. Sharpening of Island Size Distribution with Increasing Detachment Rate Experimental Data for Fe/Fe(001), Stroscio and Pierce, Phys. Rev. B 49 (1994) Petersen, Ratsch, Caflisch, Zangwill, Phys. Rev. E 64, 061602 (2001).

  22. Scaling of Computational Time Almost no increase in computational time due to mean-field treatment of fast events

  23. Verify Scaling Law Slope of 1/3 Ostwald Ripening M. Petersen, A. Zangwill, and C. Ratsch, Surf. Science 536, 55 (2003).

  24. Outline • Introduction • The basic island dynamics model using the level set method • Include Reversibility Ostwald Ripening • Include spatially varying, anisotropic diffusion • self-organization of islands

  25. Nucleation and Growth on Buried Defect Lines Results of Xie et al. (UCLA, Materials Science Dept.) • Growth on Ge on relaxed SiGe buffer layer • Dislocation lines are buried underneath. • Lead to strain field • This can alter potential energy surface: • Anisotropic diffusion • Spatially varying diffusion • Hypothesis: • Nucleation occurs in regions of fast diffusion Level Set formalism is ideally suited to incorporate anisotropic, spatially varying diffusion without extra computational cost

  26. Replace diffusion constant by matrix: Diffusion in x-direction Diffusion in y-direction Possible potential energy surfaces • Diffusion equation: no drift • Velocity: drift • Nucleation Rate: Modifications to the Level Set Formalism for non-constant Diffusion

  27. What we have done so far Assume a simple form of the variation of the potential energy surface (i.e., sinusoidal) For simplicity, we look at extreme cases: only variation of adsorption energy, or only variation of transition energy (real case typically in-between)

  28. fast diffusion slow diffusion Isotropic Diffusion with Sinusoidal Variation in x-Direction Only variation of transition energy, and constant adsorption energy • Islands nucleate in regions of fast diffusion • Little subsequent nucleation in regions of slow diffusion

  29. Comparison with Experimental Results Results of Xie et al. (UCLA, Materials Science Dept.) Simulations

  30. In both cases, islands mostly nucleate in regions of fast diffusion. • Shape orientation is different Anisotropic Diffusion with Sinusoidal Variation in x-Direction

  31. Isotropic Diffusion with Sinusoidal Variation in x- and y-Direction

  32. Comparison with Experimental Results Results of Xie et al. (UCLA, Materials Science Dept.) Simulations

  33. Etran Ead Spatially constant adsorption and transition energies, i.e., no drift small amplitude large amplitude Regions of fast surface diffusion Most nucleation does not occur in region of fast diffusion, but is dominated by drift Anisotropic Diffusion with Variation of Adsorption Energy What is the effect of thermodynamic drift ?

  34. D x Transition from thermodynamically to kinetically controlled diffusion Constant transition energy (thermodynamic drift) Constant adsorption energy (no drift) But: In all cases, diffusion constant D has the same form:

  35. What is next with spatially varying diffusion? • So far, we have assumed that the potential energy surface is modified externally (I.e., buried defects), and is independent of growing film • Next, we want to couple this model with an elastic model (Caflisch et al., in progress); • Solve elastic equations after every timestep • Modify potential energy surface (I.e., diffusion, detachment) accordingly • This can be done at every timestep, because the timestep is significantly larger than in an atomistic simulation

  36. Conclusions • We have developed a numerically stable and accurate level set method to describe epitaxial growth. • The model is very efficient when processes with vastly different rates need to be considered • This framework is ideally suited to include anisotropic, spatially varying diffusion (that might be a result of strain): • Islands nucleate preferentially in regions of fast diffusion (when the adsorption energy is constant) • However, a strong drift term can dominate over fast diffusion • A properly modified potential energy surface can be exploited to obtain a high regularity in the arrangement of islands. More details and transparencies of this talk can be found at www.math.ucla.edu/~cratsch

More Related