1 / 23

Equipment for Testing Mobile QoS

Equipment for Testing Mobile QoS. Joachim Pomy Consultant@joachimpomy.de OPTICOM, Germany. ITU Workshop on “Monitoring and Benchmarking of QoS and QoE of Multimedia Services in Mobile Networks” (Buenos Aires, Argentina, 24-25 July 2014). [Content].

kasen
Download Presentation

Equipment for Testing Mobile QoS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Equipment for Testing Mobile QoS Joachim Pomy Consultant@joachimpomy.deOPTICOM, Germany ITU Workshop on “Monitoring and Benchmarkingof QoS and QoE of Multimedia Services in Mobile Networks” (Buenos Aires, Argentina, 24-25 July 2014) Buenos Aires - Argentina - 24 - 25 July 2014

  2. [Content] ITRs: Setting the stage for a connected world Buenos Aires - Argentina - 24 - 25 July 2014 • Equipment for Testing Mobile QoS • Measurements • Test Scenarios • Trigger Points • Test Equipment • Testing for various Services • Practical Hints • POLQA - Voice Quality - Hot Topic

  3. Measurement of QoS in Mobile • Measured from the perspective of an expert • Assessing the network to see if it delivers the quality that the network planner targeted (cf. Rec. ITU-T G.1000) • Tools and Methods for Operation and Maintenance • Protocol analysers are connected to BTSs, BSCs, and MSCs for a period of time to check for problems in the cellular network • Drive test (also walk tests) are used for monitoring operationally achieved QoS Buenos Aires - Argentina - 24 - 25 July 2014

  4. Measurement of QoS in Mobile • Drive tests allow the mobile network to be tested through the use of a team of people who take the role of users • Rate the QoS of the network • Not applicable to the entire network • Always a statistical sample • In Operation and Maintenance Centres (OMCs), counters are used for various events • Providing the network operator with vendor specific information on the state and quality of the network • Also, customer complaints are a vital source of feedback on the QoS, and must not be ignored Buenos Aires - Argentina - 24 - 25 July 2014

  5. End-to-end QoS Testing in Mobile • Minimum requirement for QoS measurement equipment to ensure that • for all QoS parameters • trigger points are well defined • values are determined following wqell defined procedures • Test-equipment fulfilling the specified minimum requirements • Will allow performing the proposed measurements • In a reliable and reproducible way Buenos Aires - Argentina - 24 - 25 July 2014

  6. Parameters are based on Field Measurements • Measurements from customers point of view • Full End-to-End perspective, taking into account needs of testing • Assumed end customer can handle his equipment and services to use • Operability is not evaluated at this time • For the purpose of measurement it is assumed that • service is not barred for any reason • routing is defined correctly without errors • target subscriber equipment is ready to process service request • speech and video quality values measured • Only to be applied to calls ended successfully • In order to receive proper statistical analysis Buenos Aires - Argentina - 24 - 25 July 2014

  7. Not yet any ITU Standards in Place • ETSI TS 102 250 part 4 • Speech and multimedia Transmission Quality (STQ); QoS aspects for popular services in GSM and 3G networks; Part 4: Requirements for Quality of Service measurement equipment • globally recognized as "the requirement" in the area • extremely compehensive • detailed instructions Buenos Aires - Argentina - 24 - 25 July 2014

  8. [Content] ITRs: Setting the stage for a connected world Buenos Aires - Argentina - 24 - 25 July 2014 • Equipment for Testing Mobile QoS • Measurements • Test Scenarios • Trigger Points • Test Equipment • Testing for various Services • Practical Hints • POLQA - Voice Quality - Hot Topic

  9. Test Scenarios • Test scenarios need to distinguish the following principal user cases • User-to-user services (typically telephony) • Store-and-forward services (e.g. SMS) • Information services (e.g. accessing the internet or FTP download) • Push services (sender initiated transfer) Buenos Aires - Argentina - 24 - 25 July 2014

  10. [Content] ITRs: Setting the stage for a connected world Buenos Aires - Argentina - 24 - 25 July 2014 • Equipment for Testing Mobile QoS • Measurements • Test Scenarios • Trigger Points • Test Equipment • Testing for various Services • Practical Hints • POLQA - Voice Quality - Hot Topic

  11. Considerations on trigger points • It can be assumed that • any feasible test equipment will contain some kind of communication terminal (UE) which may be a special type (e.g. a Trace Phone) • or a standard UE • Also, it can be assumed that each such device will provide information from different communication layers • from Application Layer (close to the user interface) • down to lower layers, e.g. operating-system events, TCP/IP layer, or Layer 3 signalling information, which is used as trigger points for QOS PARAMETERS processing • Typically AT commands can be used in majority of cases • Action is typically triggered • by some emulated user action • causing some action on the air interface Buenos Aires - Argentina - 24 - 25 July 2014

  12. Considerations on trigger points • Process of event propagation is deterministic • allowing for kind of mapping between layers • associated with communication and processing delay in each stage. • Choice of the layer for trigger point information retrieval • determines the view expressed in a QOS PARAMETER • choosing lower-level events ( Layer 3) gives more network-centric view • events on higher levels to produce views more user-related • for same QoS PARAMETER source layer for events used as trigger points should be the same • In benchmarking, for all all networks under test • use same type of UE, and QOS PARAMETERS • use trigger points from the same layer. • Changing the source layer for a given trigger point • changes in QOS PARAMETERS should be expected • calibration measurements required • to assess influence on QOS PARAMETERS both quantitatively and qualitatively. Buenos Aires - Argentina - 24 - 25 July 2014

  13. [Content] ITRs: Setting the stage for a connected world Buenos Aires - Argentina - 24 - 25 July 2014 • Equipment for Testing Mobile QoS • Measurements • Test Scenarios • Trigger Points • Test Equipment • Testing for various Services • Practical Hints • POLQA - Voice Quality - Hot Topic

  14. Mobile QoS Test-equipment (MQT) • Geographical data collection during a mobile measurement • Position, speed and heading • Taken from GPS whenever possible. • If no GPS available use other tools • e.g. navigation on a geo-referenced bitmap Buenos Aires - Argentina - 24 - 25 July 2014

  15. [Content] ITRs: Setting the stage for a connected world Buenos Aires - Argentina - 24 - 25 July 2014 • Equipment for Testing Mobile QoS • Measurements • Test Scenarios • Trigger Points • Test Equipment • Testing for various Services • Practical Hints • POLQA - Voice Quality - Hot Topic

  16. Telephony Voice • Means to generate necessary calls or to answer automatically incoming calls • Received speech sample is measured • via the analogue output of the User Equipment • hardware setup to include necessary electrical adaptation • Hardware setup of such a system is essential for the correctness of the measured QoS Parameters • Includes a UE specific part for the electrical adaptation • audio output of handset to input of the soundcard Buenos Aires - Argentina - 24 - 25 July 2014

  17. Video Telephony • Means to generate necessary calls or to answer automatically incoming calls • Capability to provide the following measurement methods. • Video Telephony using the User Equipments application; or • Video Telephony using a Video Telephony Stack on the PC. Buenos Aires - Argentina - 24 - 25 July 2014

  18. MQT for FTP • FTP client to support the following functions: • Active / Passive Mode • Common Firewall support • Downloading from subdirectories. • Uploading to subdirectories Buenos Aires - Argentina - 24 - 25 July 2014

  19. Mobile based measurement equipment • Functionalities of the MQT can also be realised on a single mobile phone • Different types of QoS tests can run • Test results can be logged for post processing • Mobile based measurement equipment may be controlled • by an application, remotely or • may be operated by a human Buenos Aires - Argentina - 24 - 25 July 2014

  20. [Content] ITRs: Setting the stage for a connected world Buenos Aires - Argentina - 24 - 25 July 2014 • Equipment for Testing Mobile QoS • Measurements • Test Scenarios • Trigger Points • Test Equipment • Testing for various Services • Practical Hints • POLQA - Voice Quality - Hot Topic

  21. Practical Hints • Which Mobile Phone to use ? • should be one offered in the shop ? • should be one used by new customers ? • should be one hipe to young people ? • should be one with good QoS ? • BUT • it MUST be a so-called Trace Mobile • ASK YOUR PHONE PROVIDER !!! • they are RARE !!!! Buenos Aires - Argentina - 24 - 25 July 2014

  22. [Content] ITRs: Setting the stage for a connected world Buenos Aires - Argentina - 24 - 25 July 2014 • Equipment for Testing Mobile QoS • Measurements • Test Scenarios • Trigger Points • Test Equipment • Testing for various Services • Practical Hints • POLQA - Voice Quality - Hot Topic

  23. Any questions ? Contact:Consultant@joachimpomy.de Buenos Aires - Argentina - 24 - 25 July 2014

More Related