1 / 35

KX-NS1000 Basic Specification

Document for Technical and Sales Training. KX-NS1000 Basic Specification. January 14, 2016. Panasonic System Networks PBX SE team.

kailani-james
Download Presentation

KX-NS1000 Basic Specification

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Document for Technical and Sales Training KX-NS1000Basic Specification January 14, 2016 Panasonic System NetworksPBX SE team This document explains basic specification of KX-NS1000 version 4.3.It is recommended to know basic specification of KX-NS small PBX (KX-NS300-500-700) before reading this document.Specifications are subject to change without notice.

  2. IP Network KX-NS0130 KX-NS0130 KX-TDE620 etc 1. Introduction KX-NS1000 is bigger capacity model of KX-NS PBX series.KX-NS1000 supports 1,000 extensions.1,000 IP phone or 1,000 Digital PT or 1,000 SLT or 1,000 mixtureKX-NS1000 supports lots of built-in solution. Voice Mail, Unified Message, Recording, Call center, Unified Communication, Mobility, Conference, One-look networking and so on KX-NS8188 E1 adapterKX-NS8290 PRI adapter Built-inSolution KX-NS1000Slave KX-NS1000Master Max. 16KX-NS1000 1,000Extension KX-NT KX-HDV Other SIP SIP Phone Softphone KX-DT w/ SLT KX-DT KX-T7xxx SLT DSS Console 100 % Feature transparency like TDE600 and TDE620

  3. 2. Feature Difference KX-NS small PBX and KX-NS1000 have same feature basically like KX-NCP and KX-TDE. Feature difference is as follows. (*) These features are not available when KX-NS small PBX is connected with KX-NS1000 by one-look network.

  4. 3. Table of Contents

  5. Chapter 1Basic Configuration

  6. 11. Capacity Capacity is as follows. 600 Trunk + 1000 Extension is available.Trunk + Extension total capacity of KX-TDE600 was limitedbecause total 43 free slot by KX-TDE600 + 3 x KX-TDE620.But KX-NS1000 can support lots ofKX-TDE620.(*1) 24SLT x 10 by TDE620 x 2 for example(*2) 256 DPT including DXDP by TDE620 x 2 for example 100 % FeatureTransparencylike TDE600to TDE620 TDE600 +TDE620 x 3 NS1000 x 4 + TDE620 x 8 for example 1000 Digital PT is available using Digital XDP because one DLC16 occupies 32-ch.

  7. IP Network(VPN) 12. Capacity with QSIG H.323 QSIG connection provides Max.256x <1,000 extensions by“NS1000 master with NS1000 slave and KX-TDE620 etc”>. - Network DSS key can be used in 8 PBXs.- KX-TDE/NCP also can be connected using H.323 QSIG.- It is very unusual that more than 96 users in 1,000 extensions have to talk with extensions in other PBX at the same time. 96-ch is enough. NS1000 x 2 1000 Ext 32ch NS1000 x 2 1000 Ext 96ch NS1000 x 2 1000 Ext 96ch NS1000 x 2 1000 Ext 96ch 96ch H.323 NS1000 x 2 1000 Ext 96ch 96ch 96ch KX-DT SLT KX-NT KX-HDV KX-DT SLT KX-DT SLT KX-DT SLT KX-NT KX-HDV KX-DT SLT KX-DT SLT 1000Ext 100 % FeatureTransparencylike TDE600and TDE620 1000Ext 100 % FeatureTransparencylike TDE600and TDE620 512 x <640 extensions by one KX-NS1000> is also available with 48ch H.323.

  8. M O G Q H N B R C D E P F J I A 13. KX-NS1000 Main Unit Front View Back View (*) D is independent from E. D is useful when PC for maintenance is not allowed to connect to customer’s network. D and E for TDE/NCP were for same network.

  9. 14. Optional Cards on Mother Board Two DSP can be installed. Hot swap is not available.

  10. 15. Optional Cards on Front 2 analogue trunk ports with Caller ID (FSK/FSK with Call Waiting Caller ID /DTMF).Oneport is a power failure transfer (PFT) port.2 extension ports with Caller ID (FSK) for SLTs. Hot swap is not available.

  11. Chapter 2Stacking CardOne-look Network

  12. IP Network KX-NS0130 KX-TDE620 etc 21. Stacking Card When customer needs lots of analog SLT, digital PT, analog CO, PRI and so on, KX-NS1000 withstacking card KX-NS0130 is useful.- KX-TDA100-200-600-620, KX-TDE or KX-NCP works as slave unit.- 2 slave units are supported with one KX-NS1000 by one KX-NS0130. - KX-NS0131/0132 is installed to slave unit instead of MPR or BUS card. - KX-TDA(E)620 cannot be connected with KX-TDA(E)600 by BUS card. Built-inSolution KX-NS1000 DSP 640Extension KX-NT KX-HDV Other SIP SIP Phone Softphone KX-DT w/ SLT DSS Console 100 % Feature transparency like TDE600 and TDE620

  13. IP Network KX-NS0130 KX-NS0130 KX-TDE620 etc 22. One-look Networking A maximum of 12 KX-TDA/TDE/NCP and16 KX-NS1000 can be connected for the entire One-look Network for 1,000 extensions.One-look networking is similar to TDE600-TDE620 connection. KX-NS1000 master works like KX-TDE600. Other units work like KX-TDE620. All programming is available through KX-NS1000 master like KX-TDE600.Activation key : KX-NSN001 is required for each KX-NS PBX. Max. 16KX-NS1000 Built-inSolution KX-NS1000Slave KX-NS1000Master DSP DSP Max. 12KX-TDA/TDE/NCP 1,000Extension KX-NT KX-UDV Other SIP SIP Phone Softphone KX-DT w/ SLT KX-DT KX-T7xxx SLT DSS Console 100 % Feature transparency like TDE600 and TDE620 Maximum of KX-TDA/TDE/NCP was 8 for KX-NS1000 version 4.0 or before.

  14. IP Network 23. One-look Networking with KX-NS small PBX A maximum of 15 KX-NS small PBXalso can be connected for the entire One-look Network as slave PBX. Master PBX should be KX-NS1000.Activation key : KX-NSN001 is required for each PBX.Hardware : DSP such as KX-NS5110 is required because VoIP is used for connection. (A) Max. 12KX-TDA/TDE/NCP (B) Max. 24KX-NS320KX-NS520KX-NS720 KX-NS1000 KX-NS small PBX DSP KX-NS0130 DSP (C) KX-NS1000 master +15 KX-NS1000 or KX-NS small PBX DSP Max. 1,000Extension KX-NS300: SD card such as KX-NS3134 is also required.(KX-NSF990 AK is required when KX-NS300 needs IP trunk, IP extension or UM. ) KX-NS small PBX cannot be master (including back-up master) because not enough CPU.

  15. IP Network IP Network 24. Upgrade from QSIG When customer is using KX-TDA/TDE/NCP with Q-SIG, KX-NS1000 with one-look networking is useful for more features such as paging. KX-TDE620 Stacking Stacking KX-TDE600 KX-TDE620 KX-TDE600 KX-NCP Max. 12 PBXs KX-NCP Stacking Stacking Stacking QSIG KX-DT KX-DTKX-DT KX-DT KX-DTKX-DT Paging Paging Paging 100 % Feature transparency

  16. IP Network 25. Stacking Card – Conditions (1) - Different PBX category cannot be mixed to one KX-NS1000. Category 1 : KX-NCP500-1000 Category 2 : KX-TDE(A)100-200 Category 3 : KX-TDE(A)600-620Category 4 : KX-TDA100DNCP500+TDE200 : N/A TDE100+TDA200 : OK TDE600+TDE620: OK TDE620+TDE620: OK- Card configuration for optional cards in KX-TDA/TDE/NCP with stacking card does not change from KX-TDA/TDE/NCP with MPR. For example, Max. 4 PRI cards can be installed to KX-TDE200.KX-TDA1178 cannot be installed to KX-TDA600.Max. 5 KX-TDA1178 can be installed to KX-TDE200. (MEC is not required for KX-TDA1176/1178 in KX-TDE100-200 with stacking card.) - KX-TDA100-200-600-620 with stacking card is treated as KX-TDE100-200- 600-620 for above condition. Stacking Stacking KX-TDE600 KX-TDE620 KX-NCP Stacking Stacking Stacking KX-DT KX-DTKX-DT

  17. 26. Stacking Card – Conditions (2) - Cards in right table are not supported. Reason is as follows. - MPR is removed. - IP feature is supported by KX-NS1000. - DISA feature is supported by KX-NS1000 using VoIP DSP card. - IP phones should be registered to KX-NS1000. KX-NS1000 does NOT support KX-NT136, KX-NT400, KX-HGT100 and so on.- IP capacity AK is not required for trunk and extension in existing PBXs because these are not IP. - Other AK such as CA is required in KX-NS1000 for extension in existing PBX.- In case of TDA100/200 and TDE100/200, OPB3 card with ECHO16 must be installed to Slot 1.*) Other cards except OPB3 or OPB3 card with other daughter board except ECHO16 can be installed to any slot.

  18. Chapter 3Trunk Adapter (E1/PRI)

  19. Trunk Adaptor IP Network 31. E1 / PRI Adapter When customer needs IP-Phone mainly for extension and uses E1 or more than 2 PRI as trunk, KX-NS1000 with trunk adapteris useful.Trunk adapter is connected using SIP trunk.Activation key for IP trunk is not required to connect E1 / PRI adapter.Trunk adapter cannot be connected with other PBX using SIP. PanasonicKX-NS8290 PRI30 SIP Extension PRI30 SIP Trunk (30-ch) KX-NS1000 IP Trunk AK PRI Card KX-NCS0290 215 mm (W)44 mm (H)200 mm (D) 500g SIPSoftphone OtherSIP Phone KX-HDV KX-NT

  20. Trunk Adaptor Trunk Adaptor Trunk Adaptor Trunk Adaptor Trunk Adaptor 32. PRI Adapter - Fractional Fractional service is also available.<Stand alone> 20chE1/PRI 20ch KX-NS1000 <One-look network> 20chE1/PRI 60chE1/PRI 10chE1/PRI Total 256ch 20ch 10ch 30ch 30ch 16th KX-NS1000in Niseko 1st KX-NS1000in Fukuoka 2nd KX-NS1000in Tokyo

  21. IP Network(VPN) Trunk Adaptor 33. PRI Adapter - QSIG PRI adapter supports ISDN QSIG also to connect with other PBX.Trunk adapter is connected using H.323trunk.Activation key for IP trunk is not required for PRI adapter.Trunk adapter cannot be connected with other PBX using H.323. 192.168.0.101 KX-NS1000 192.168.0.151 PRI Ext 2xx H.323 IP Trunk AK ISDN QSIG Ext 1xx KX-TDA/TDE/NCP or PBX by other maker 192.168.30.101 Ext 3xx DN2IP table (Dial to IP)----------------------------------- Dial 2xx to 192.168.0.151Dial 3xx to 192.168.30.101Dial 4xx to 192.168.40.101 192.168.40.101 Ext 4xx

  22. Chapter 4WAN (Built-in Router)

  23. IP Network IP Network IP Network 41. WAN (Built-in Router) WAN (Built-in Router)is supported from KX-NS1000 version 3.Hardware for WAN is available since version 1 mass production.Activation key : KX-NSN101 is required. One internet line can be usedfor both PC and VoIP. PortFwd WANRouter LAN for Maintenance223.0.0.1 (Default) LAN LAN (Customer’s network)192.168.0.101 (Default) When customer wants to add one more internet for VoIP (Extension or Trunk),Add one more router. Or use built-in router.Port Fwd is not required. PortFwd WAN WAN WAN Router Router LAN LAN

  24. IP Network 42. Built-in VPN WAN / Built-in Router can support VPN (IP-SEC) feature also.VPN is required if one-kook network is configured using built-in router.Activation key : KX-NSN216 is required.(KX-NSN101 is also required.) One KX-NSN216 supports 16 VPN connection. Max. two AKs can be supported for 32 VPN connection. IP phone also can be connected using VPN for secured communication instead of MRG feature. Easy Installation even for VPNby Panasonic technology “VPSS”. External VPN Router VPN VPN VPN Router Router Router

  25. Chapter 5Activation Key

  26. 51. Activation key only for KX-NS1000 Following activation key is only for KX-NS1000.

  27. Pre-installed 52. Activation Key for Expansion Following activation key was added from KX-NS1000 version 3. These AK are required for each master and slave PBX. 30 50 100 300 640 IP phone NSX930 NSX999 NSX910 NSM005 NSX930 NSX999 NSM010 NSM030 NSX999 NSM099 60days free trial is NOT available.

  28. 53. Pre-installed Activation Key Following features are available without buying activation key and without expiration.

  29. Chapter 6Capacity(Review and Conditions)

  30. 61. Capacity - Summary Capacity is as follows. (*1) 24SLT x 10 by TDE620 x 2 for example (*2) 256 DPT including DXDP by TDE620 x 2 for example(*3) For example, KX-NS1000 x 1 as master + KX-NS small PBX x 2 also can support 1,000 extensions. Capacity is occupied when hardware card and virtual IP card are installed, even if phone is not connected actually.For example, one DLC16 in KX-NS1000 or KX-NS small PBX connected by one-look network occupies 32-ch including Digital XDP.

  31. 62. Capacity - KX-NT KX-NT capacity for one unit of KX-NS1000 can be increased.Type 1 or Type 2 can be selected after default clear. Type 3 is also available to increase H.323 ch. : 128 ch for NS1000 2 or more unitBut capacity of IP extension reduces. See Installation manual for details.

  32. 63. Capacity - Conditions One VM channel reduces 10-port extension capacity of master PBXbecause CPU of master PBX needs more power for VM.- Default 2-ch does not reduce this.- Extension capacity of slave PBX does not reduce, even if slave PBX has VM because CPU of slave PBX is not so busy. Total 1000 extensions Master PBX Slave PBX VM VM This condition is applied to KX-NS1000 only. (Not to KX-NS small PBX)

  33. 64. Capacity - Configuration Tool Required hardware and activation key can be advised using tool by MS Excel. Web edition is also available for more features.

  34. Thank you !

  35. Revision

More Related