1 / 1

Spindle / Feed Overrides

Common HAAS Mill Panel Controls. Measure Offset of Tool from Zero. Load Next Tool. Current Commands. Set Axis Zero. Tool and Axis Offsets. Tool Load / Release Note: When loading, hold button until tool is secure . Locks Table Motion at Selected Rate/Direction. Screen Display.

kaemon
Download Presentation

Spindle / Feed Overrides

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Common HAAS Mill Panel Controls Measure Offset of Tool from Zero Load Next Tool Current Commands Set Axis Zero Tool and Axis Offsets Tool Load / Release Note: When loading, hold button until tool is secure Locks Table Motion at Selected Rate/Direction Screen Display Misc. Functions Machine Settings Tool Control Directional Pad Note: Used only when in Hand Jog Mode Runs One Line of Code and Stops Note: Press start to run next code line Spindle / Feed Overrides Rotates Tool Turret fwd/back Tool Feed Rate Shows Programin Memory Spindle Rotation Rate Manual Data Input Spindle Rotation Manual Axis Movement Note : Upper (in) , Lower (mm) Table Rapid Speed Turns Coolant on/off

More Related