1 / 10

AREN 2110: WATER PROPERTIES

AREN 2110: WATER PROPERTIES. STATE INFORMATION FOR LIQUID , SATURATED LIQUID-SATURATED VAPOR PHASE MIXTURES , AND SUPERHEATED STEAM P-v AND T-v DIAGRAMS SATURATED LIQUID-VAPOR AND STEAM TABLE EXAMPLES.

kacia
Download Presentation

AREN 2110: WATER PROPERTIES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. AREN 2110: WATER PROPERTIES • STATE INFORMATION FOR LIQUID, SATURATED LIQUID-SATURATED VAPOR PHASE MIXTURES, AND SUPERHEATED STEAM • P-v AND T-v DIAGRAMS • SATURATED LIQUID-VAPOR AND STEAM TABLE EXAMPLES

  2. Phase Equilibrium Conditions and Associated Temperature Points (Drawn volumes are not to scale) SAT. ICE + SAT WATER ICE LIQUID WATER Q Q Q T = Ti = ice point SUPER-HEATED STEAM SAT. STEAM SAT. STEAM SAT. LIQUID SAT. LIQUID Q Q Q Q T > TS T = TS T = TS = boiling point T = TS

  3. Q Q Q Q STATE 1: PURE LIQUID H2O; T = 20 C P = 1 ATM "COMPRESSED LIQUID" Add heat, T increases. P held constant by piston + air weight, DV > 0 STATE 2: PURE LIQUID H2O; T = 100 C P = 1 ATM "SATURATED LIQUID" IF any heat added, liquid vaporizes. P constant, DV > 0 STATE 3: 2-PHASE MIXTURE T = 100 C P = 1 ATM "SATURATED LIQUID-VAPOR MIXTURE" Add heat, more liquid  vapor, DT = 0, DV > 0 STATE 4: ALL H20-VAPOR T = 100 C P = 1 ATM "SATURATED VAPOR" IF any heat lost, vapor will condense (DT = 0, DV < 0). If heat added, DT > 0, DV > 0. STATE 5: ALL H20-VAPOR T = 200 C P = 1 ATM "SUPERHEATED VAPOR" IF some heat lost, but T > 100 C, no condensation, DT < 0, DV < 0. IF heat added, DT > 0, DV > 0 Q LIQUID-VAPOR PHASES UNDER CONSTANT PRESSURE WITH HEAT ADDED FOR LIQUID TEMP INCREASE, BOILING, AND STEAM TEMP INCREASE; PISTON MAINTAINS PRESSURE AT 1 ATM FOR ALL STEPS.

  4. PLOT MULTIPLE ISOBARIC PHASE CHANGE T-v LINES TO PRODUCE COMPLETE LIQUID WATER-STEAM T-v DIAGRAM FOR H2O

  5. Q Q STATE 1: PURE LIQUID H2O; T = 150 C P = 1 MPa (~ 100 atm) "COMPRESSED LIQUID" Lower pressure (decrease piston W), T held constant, Dv > 0 STATE 2: PURE LIQUID H2O; T = 150 C P = Psat = 0.4758 MPa "SATURATED LIQUID" Liquid begins to boil. DP = 0, Dv > 0, (expands, DW = 0) STATE 3: 2-PHASE MIXTURE T = 150 C P = Psat = 0.4758 MPa "SATURATED LIQUID-VAPOR MIXTURE" Boils, expands, DT = 0, DP = 0, Dv > 0 (DW = 0) STATE 4: ALL SATURATED H20-VAPOR T = 150 C P = Psat = 0.4758 MPa "SATURATED VAPOR" IF any expansion and DT = 0, Dv > 0, DP < 0 (DW < 0); IF Dv < 0, condensation, DP = 0, DT = 0 PHASE CHANGE UNDER CONSTANT TEMPERATURE. FOR 1-PHASE, PRESSURE REDUCED BY LOWERING PISTON WEIGHT; HEAT ADDED TO MAINTAIN ISOTHERMAL CONDITION AS SPECIFIC VOLUME INCREASES AT EACH STEP. DURING BOILING P AND T ARE CONSTANT. Q STATE 5: SUPERHEATED STEAM T = 150 C P = 0.2 MPa "SUPERHEATED VAPOR" no condensation if P increased but < 0.4758 MPa, DT = 0, IF DP < 0, Dv > 0

  6. PLOT MULTIPLE ISOTHERMAL PHASE CHANGE P-v LINES TO PRODUCE COMPLETE LIQUID WATER-STEAM P-v DIAGRAM FOR H2O

More Related