1 / 49

ASE MISSION natef

ASE MISSION www.natef.org To improve the quality of vehicle repair and service through testing and certification. 2010 is here! 2011 will bring more changes. Nobody likes change but wet babies. Program Certification Process. Recom- mendation for Certification. Program Self Evaluation.

Download Presentation

ASE MISSION natef

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ASE MISSION www.natef.org To improve the quality of vehicle repair and service through testing and certification.

  2. 2010 is here! 2011 will bring more changes Nobody likes change but wet babies

  3. Program Certification Process Recom- mendation for Certification Program Self Evaluation On-Site Evaluation NATEF Review ASE Certification (5 years)

  4. Transportation PROGRAMCERTIFICATION • Automobile(includes optional CNG, LPG) • Collision Repair & Refinish • Medium/Heavy Truck (includes optional CNG, LNG, LPG)

  5. 6. Instruction 7.Equipment 8. Facilities 9. Instructional Staff 10. Cooperative Agreements 11. Elearning Program Standards • Purpose • Administration • Learning Resources • Finances • Student Services

  6. Five Point Rating Scale 5 Exceptional; Above Average 4 Average; Adequate 3 Somewhat; Needs Improvement 2 Very little 1 Not at all

  7. Rating Standards154Documentation!Documentation!Documentation!

  8. Standard 2.5; An Advisory Committee consisting of at least five (5) members must convene at least two times a year and be utilized to provide counsel, assistance, and information from the community served by the training program. This committee should be broadly based and include former students, employed technicians, employers, and representatives for consumers’ interest. Go-No-Go Standard 2.5 Stds 2.3 D&E, 4.2A, 5.5E, 6.4A, 6.5C, 6.7 B, 6.14 F, 7.5B And Advisory tour of facility Std 8.11 Should be discussed and recorded in the minutes Std 11 new!

  9. Std. 2.5 Business and Industry Council Tom Richardson says “It is all about relationships!” Advisory meetings should be face to face, working meetings. Short and to the point. Do not waste their time!

  10. Business and Education Council • https://autoteacher.net/AYES_Page.php Information on requirements for an advisory How to develop and maintain an advisory Watch an Advisory meeting

  11. Std. 2.5 Local business representatives Local business representatives Counselors, Administrators Parents Owners and service managers

  12. GO / NO - GO ITEMS • Standard 5.5 F The Advisory Committee must review information from annual follow-up procedure and provide input for modifications to the program.

  13. 6.15 Live work https://autoteacher.net/NATEF

  14. All students will receive instruction in the storage, handling, and use of Hazardous Materials as required in Hazard Communication Title 29, Code of Federal Regulation Part 1910.1200, ‘Right to Know Law’, and state and local requirements; Std 6.8 Std. 6.5 D 1, 2 Hazardous and toxic materials will be handled, removed and recycled or disposed of according to federal, state, and local regulations. www.sp2.org

  15. Hands on Performance Evaluation training programs being evaluated for certification should have written and detailed performance standards for each task covered and taught in the curriculum; Validates the Program Hands on Performance Evaluation Std 6.7 Hands on Competency Std 6.7, A,B,C Std. 6.13 Validates the Program

  16. Std. 7.1A Go-No Go Equipment Safety Std. 8.2A Safety Signage Std.6.8D Shop Safety Std 8.2 G Traffic lanes Bolt down equipment

  17. GO / NO - GO ITEMS Standard 6.5 A (Collision) 95% of HP-I tasks 90% of HP-G tasks must be in curriculum

  18. GO / NO - GO ITEMS Standard 6.5 A (Auto) 95% of P1 tasks 80% of P2 tasks 50% of P3 tasks must be in curriculum GST must teach 100% of tasks

  19. The student has received the necessary training to locate and use current reference and training materials from accepted industry publications and resources. Std 6.5 , 5&6

  20. www.natef.org • https://autoteacher.net/NATEF__Teacher_Helps.html • E Learning • http://www.natef.org/documents/natefe-learningq&a.pdf

  21. Std 6.13 Testingboth written and performance based http://www.gactaern.org/curri http://www.na3sa.com/

  22. Your first impression is important!

  23. GO / NO - GO ITEMS • Standard 7.1 B Safety glasses must be worn by all students, instructors, and visitors in the lab/shop area while lab is in session.

  24. Std 6.9 A 5,6 Personal Habits, 6.10 Work Habits

  25. 8.6 A Separate classroom Std 6.8 D and 7.1 B Safety Glasses must be worn if any work is being done in shop/lab

  26. GO / NO - GO ITEMS • Standard 7.1 A All shields, guards, and safety devices must be in place, operable, and used. Note: A go-no-go std will cause the program not to be certified no matter how good the rest of the evaluation is.

  27. 7.1 A Go-No Go Safety! 7.1 B Safety Glasses 8.4 Orderly workplace/lab

  28. Std 7.2 Tools & Equipment must meet program goals

  29. Std. 7.2 A,B,C Std 7.8 A,B,C Hand tools Quality&Quantity

  30. Std 6.4 teaching load and contact hours Std 2.4 liability Std 8.2 Safety of the facility

  31. Std 6.5 OSHA, EPA, and Safety Std 8.4, 8.1, 8.2

  32. 8.2 C Power cut 8.2, B Fire Extinguishers

  33. 8.7 Storage

  34. Std 8.9, 8.2 Exhaust

  35. Std 8.4, Std. 8.10 A,B,C Std. 8.2 B First Aid Housekeeping Honda Factory Training Center

  36. Go-No-go Std. 9 Instructors required to attend at least 20 hours/year of recognized industry training relevant to the areas in which the program is certified. Std.2.3 A, Can you go? Std.9.3 B, Do you go? Documentation of attendance required.

  37. Internships Std. 10 17 yr old @ local Dealership Student Apprenticeships Summer internships Std. 10.1A, 10.2A, 10.3A

  38. Send to ETL At least two weeks prior to on-site: • Application for On-site Evaluation • Course of Study • On-site Team Member List • Advisory Committee List • Arrangements for the visit

More Related