1 / 16

Buy Ringlock Scaffolding USA

We JRS Industries Inc. With Brand Name of JRS Scaffolds With its Distribution Center Based in Houston Deals In Ringlock, Cuplock, Pinlock, Frames, Clamps & Its Related Accessories.

jrsscaffolds
Download Presentation

Buy Ringlock Scaffolding USA

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BREIF INFORMATION JRS SCAFFOLDS SYSTEM AND PRODUCTS

  2. Raw Material at C-109 • Pipe: DIN 17100 Grade ST 52.3/EN 10219-1/2 Grade S355J0, S355J2H. • Rosette: DIN 17100 Grade ST 52.3/EN 10219-1/2 Grade S355J0, S355J2H. • Ledger and Brace ends C-25

  3. Raw Material Specification at C-109 • Jack Nut: Forging AISI 1025 • Base Plate: Grade S235 • Wedge: EN 10083 Grade C-45 • Steel planks. Perforated Steel plate, Grade S235

  4. JRS Ring System - Rosette Rosette provide up to 8 connection in one plane . 4 Narrow punched accommodate to Ledger at right angle. 4 wider holes permit alignment of Braces at the angle required. Material is used ST 52 or S 355 , Thickness 9.5mm, , O.D. 123MM Weight 0.450 Kg.

  5. JRS Ring System - Standard • It is a vertical member of the system. • Material ST 52 , TUBE SIZE 48.3X3.2MM, LENGTH 0.5 M. UP TO 3 MTS. • Visual appearance must be no spatters , No blow holes , no over welding . • Finish – self, HDG.

  6. JRS Ring System - Ledger • It is the horizontal Member of the system. • Material - ST 52/S355 , TUBE SIZE 48.3X3.2MM. • Fitted with C-25 steel casting ledger ends & C-45 wedges is used to connect vertical to each other to create a plate form . • Thus gives advantage of quick assembly as the wedge automatically slips in to position and is secured easily with hammering action. • Weight of ledger End (assembled) - 520 gms.

  7. JRS Ring System - Brace • Tube Material ST 52/S355 , TUBE SIZE 48.3X2.5MM. • Used with steel casted ends having left and right sizes. • Weight of brace end (assembled) is 700 grams /pc .

  8. JRS Ring System – Base Jack • Material used : S235 • Function : Leveling of the structure . Forged nuts gives longer life of the Base jack , we can use casting nut also. Threads are formed by cold rolling system which provide a greater load capacity of the jack . • Tube Diameter: 32, 34 & 36mm,Length 450, 500, 610, 700 mm. • Thread : 4 TPI. ACME • Plate size : 150x150x5mm. • Nut : Casted or forged, Weight 430-450 gms(Forged) • FINISH : Electro Zinc or HDG.

  9. JRS Ring System – Jacks types • TYPES : Hollow , solid , U head screw jack , Universal Screw jack , Swivel adjustable base jack , Four way head screw jack • SOLID BASE JACK : Made by solid Rods which increase the load bearing capacity of the jack . • UNIVERSAL SCREW JACK : It is used without any base and is adjustable to any type of base on requirements . • SWIVEL BASE JACK : Has adjustable base plate which is used to align structure on the slop.

  10. JRS Ring System – Base Collar • Tube diameter - 48.3x3.2mm,60.3x5mm, length 230 /330mm, material ST 52 . • Fitted with a rosette. It is link between base jack and vertical. • Fitment : The 48.3 mm tube of Base Collar fits over the Base Jack tube while the 60 mm tube encloses the tube of the standard.

  11. Hot Dip Galvanizing • 7 Tank Hot Dip Galvanizing (HDG) plant with capacity of 70 ton/day. • Final product pass on for Hammer Test, Knife Test, Preface Test, Mass of Zinc test according to finish. • HDG coating thickness is minimum 80 microns. • Zinc used is 99.995% pure.

  12. 7 tanks Hot Dip Galvanized capacity of 70 Ton /DAY .Capacity of the Plant to manufacture 9500 M.T. / Year .

  13. WELDING INSTALLED IN PLANT : • AUTOMATIC WELDING SPECIAL PURPOSE MACHINES WITH 25 POWER SOURCES IMPORTED FROM OTC DAIHEN JAPAN . GOOD QUALITY MIG WELDING ENSURED BY GAS MIXTURE OF 80% CARBON AND 20% ARGON.

  14. BEFORE DISPATCH WE SHOULD CARE • Extra care to supply quality Goods: • Calibration of Tools with regular interval . • PDI done by marketing persons before dispatch of the goods for shipment . • Video of the stuffed goods in containers for future reference . • Zero mixing , use of Tags and packing in re useable steel pallets .

  15. PDI SHOULD BE DONE BY MKT PERSON

  16. Final Packing and Dispatch

More Related