1 / 12

3. Motion Study & Work Design

3. Motion Study & Work Design. Operation Analysis Approach-1. Method analysis Eliminate, simplify, or combine operations Design analysis Reduce the number of parts Design for manufacturability and assembly Manufacture sequence Rearranging operations Mechanizing manual operation.

jqueen
Download Presentation

3. Motion Study & Work Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 3. Motion Study& Work Design

  2. Operation Analysis Approach-1 • Method analysis • Eliminate, simplify, or combine operations • Design analysis • Reduce the number of parts • Design for manufacturability and assembly • Manufacture sequence • Rearranging operations • Mechanizing manual operation

  3. Operation Analysis Approach-2 • Set-up and Tools • Reduce set-up time: SMED • Material Handling • Handling equipment • Ergonomic principles • Lay-out

  4. The Four Principles of Motion Economy 1. Reduce the Number of Motions • Eliminate or reduce the number of motions 2. Perform Motions Simultaneously • Design improvements in the methods and tools which allow both hands to be used at the same time

  5. The Four Principles (cont’d) 3. Shorten Motion Distances • Reduce - walking, reaching, stretching, squatting and turning, etc. 4. Make Motion Easier • Work should be smooth and rhythmical, reduce fatigue and promote safety

  6. Use of the Human Body • Both hands should start and finish the operation at the same time. • Reduce idle time for either or both hands • Arm motions should be symmetrical • Employ curved movements during the operation • Employ rhythmical standard operation • Ensure a similar focal point for tools, materials, etc.

  7. Arrangement of the Work Place • Use fixed positions for tooling and parts to allow habits to form easily • Use gravity feeding to ensure a common pickup point • Position parts, materials and tools to enable sequential use • Use ejector systems or drop deliveries, so the operator has minimal effort to pass on parts to the next operation • Benches and chairs should be at the correct working height to avoid interrupted motions • All equipment should be within the maximum work area

  8. Design of Tools and Equipment • Eliminate the need to use one hand purely to hold a part • Use combination tools • Use counterbalances on heavy tooling • Ensure handles on tools are designed to use maximum hand contact • Place tooling in the most convenient positions • Separate part supplies should be used for two operators. • Tools should be placed to enable immediate use • Provide chutes for access of parts, and components in/out of the workplace

  9. 5 S • Seiri, Seiton, Seiso, Seiketsu, Shitsuke • Sort, Clean, Set in order, Standardize, Progress • 5R : Ringkas, Rapih, Resik, Rawat, Rajin

  10. Poka Yoke • “Mistake proofing” • A manufacturing technique of preventing errors by designing the manufacturing process, equipment, and tools so that an operation literally cannot performed incorrectly

  11. Excuses… • I like the way I am doing it now. • It's too radical a change. • I tried it once and didn't like it. • It sounds like a production line. • It won't work in our office. • I think we should look into it further before we act. • It won't pay for itself. • I know a fellow who tried it. • We've always done it this way.

More Related