1 / 17

Microwave Calibration

Microwave Calibration. Brenda R. Cleveland Plant/Waste/Solution/Media Section NCDA&CS Agronomic Division. Presentation Today Microwave Calibration. Procedure But first . . . PWSM Section. Legislature enacted the service in 1974 Analyze about 30,000 up to 35,000 samples annually

josh
Download Presentation

Microwave Calibration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Microwave Calibration Brenda R. Cleveland Plant/Waste/Solution/Media Section NCDA&CS Agronomic Division

  2. Presentation TodayMicrowave Calibration • Procedure • But first . . . NCDA&CS Agronomic Division

  3. PWSM Section • Legislature enacted the service in 1974 • Analyze about 30,000 up to 35,000 samples annually • 18,000 waste • 9-10,000 plant (this year >11,300) • 2-3,000 solution and • 2-300 media NCDA&CS Agronomic Division

  4. PWSM Section • Analyses (N, P, K, Ca, Mg, S, Fe, Mn, Zn, Cu, B, Na) • Fees • Routine $5 • Research $12 • Out-of-State (2005) $25 • Plus fees for additional tests • NO3-N/NH4-N, heavy metals, CCE ($10 each) • Petiole NO3-N, Mo, Cl ($2 each) NCDA&CS Agronomic Division

  5. PWSM Section • Six full-time laboratory staff plus 2-3 additional staff during busy season • Chemistry Lab Supervisor (Mark Buchanan) • Chemist I (Jan Queen) • 3 Chemistry Technician III (Ying Kritalugs, Donta Baker and Kyle Crump) • 3 Research Technicians (Karla Barefoot, Ma Kpa, Brenda Woodall) NCDA&CS Agronomic Division

  6. PWSM Section • One Agronomist (Dr. Michelle McGinnis) • One Processing Assistant (Darlene Carpenter) • One Section Chief (Brenda Cleveland) NCDA&CS Agronomic Division

  7. Microwave Procedure for ICP Analysis • Add 10 ml of nitric acid to each sample; • 0.5 g plant/solid waste or 5 ml liquid waste • Space samples evenly in microwave • Digest for 30 minutes at 210 watts • Flush sides of the flasks with hydrogen peroxide • Digest for 4 minutes more at 390 watts Actual time varies depending upon the # of samples NCDA&CS Agronomic Division

  8. Quality Control • To verify that the samples have been cooked at the correct power? (210 then 390 watts) • calibrate • adjust • NIST sample NCDA&CS Agronomic Division

  9. Calibrate • Calibration is the process of adjusting the output or indication on a measure-ment instrument to agree with value of the applied standard, within a specified accuracy • Assures that microwave power is accurate and samples are digested according to the SOP NCDA&CS Agronomic Division

  10. Calibration • Monthly calibration of all microwaves • Followed by analysis of a NIST sample to verify that our procedure from start to finish NCDA&CS Agronomic Division

  11. Calibration - Preliminary • Microwave is warmed • Remove turntable • Cook 1000 ml of water in a beaker at full power (100%) for 5 minutes • Use room temperature DI water NCDA&CS Agronomic Division

  12. Calibration - Second • Watts determined at four locations • front right • front left • back right and • back left NCDA&CS Agronomic Division

  13. Determine Power for 210 Watts • Measure initial temp of 1000 ml DI water • Place beaker in the front left section of cavity • Cook 2 minutes at 210 watts • 36% power • Remove and stir then measure final temp • Repeat steps 1-4: • front right, left rear and right rear NCDA&CS Agronomic Division

  14. Calculate the watts for each of these locations and runs T [final]-T [initial] * 35 Calculate the average If the average does ≠ 210 watts OR If the watts of any of the locations is very different from the others Repeat the steps Watts Calculation NCDA&CS Agronomic Division

  15. Determine Power for 390 Watts • Same steps • 49% power • And calculations NCDA&CS Agronomic Division

  16. Quality Control • To verify that the samples have been cooked at the correct power? (210 then 390 watts) • calibrate • adjust • NIST sample NCDA&CS Agronomic Division

  17. That’s It • Any Questions • Thanks NCDA&CS Agronomic Division

More Related