1 / 25

GPS Basics

GPS Basics. What is GPS? GPS stands for Global Positioning System which measures 3-D locations on Earth surface with the aid of satellites • Created and Maintained by the US Dept. of Defense and the US Air Force • System as a whole consists of three segments

jonco
Download Presentation

GPS Basics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. GPS Basics What is GPS? GPS stands for Global Positioning System which measures 3-D locations on Earth surface with the aid of satellites •Created and Maintained by the US Dept. of Defense and the US Air Force • System as a whole consists of three segments satellites (space segment) receivers (user segment) ground stations (control segment)

  2. Satellites

  3. Satellites (space segment) • 24 NAVSTAR satellites (21 operational and 3 spares) • orbit the Earth every 12 hours • ~11,000 miles altitude • positioned in 6 orbital planes • orbital period/planes designed to keep 4-6 above the horizon at any time • controlled by five ground stations around the globe

  4. GPS – User Segment (Receivers) • Ground-based devices read and interpret the radio signals from several of the NAVSTAR satellites at once • Determine their position using the time it takes signals from the satellites to reach the hand-held unit • Calculations result in varying degrees of accuracy that depend on: • quality of the receiver • user operation of the receiver • local & atmospheric conditions • current status of system

  5. Ground stations (control segment) Ground Stations (control segment) Map from P. Dana, The Geographer's Craft Project, Dept. of Geography, U. Texas-Austin. • Five control stations • master station at Falcon (Schriever) AFB, Colorado • monitor satellite orbits & clocks • broadcast orbital data and clock corrections to satellites

  6. How It Works (p. 1) GPS - Satellite Signals • Satellites have accurate atomic clocks and all 24 satellites are transmitting the same time signal at the same time • The satellite signals contains information that includes • Satellite number • Time of transmission • Receivers use an almanac that includes • The position of all satellites every second • This is updated monthly from control stations • The satellite signal is received, compared with the receiver’s internal clock, and used to calculate the distance from that satellite • Trilateration (similar to triangulation) is used to determine location from multiple satellite signals

  7. How It Works (p. 2) Start by determining distance between a GPS satellite and your position Adding more distance measurements to satellites narrows down your possible positions

  8. How It Works (p. 3) Three distances = two points • Intersection of Four spheres = one point • Note: • 4th measurement not needed • Used for timing purposes instead (discussed later)

  9. How It Works (p. 4) • Distance between satellites and receivers • determined by timing how long it takes the signal to travel from satellite to receiver. • How? • Radio signals travel at speed of light: 186,000 miles/second • Satellites and receivers generate exactly the same signal at exactly the same time • Signal travel time = delay of satellite signal relative to the receiver signal • Distance from satellite to receiver = • signal travel time * 186,000 miles/second 1sec Satellite signal Receiver signal

  10. How It Works (p. 5) • How do we know that satellites and receivers generate the same signal at the same time? • satellites have atomic clocks, so we know they are accurate • Receivers don't -- so can we ensure they are exactly accurate? No! • But if the receiver's timing is off, the location in 3-D space will be off slightly... • So: Use 4th satellite to resolve any signal timing error instead • determine a correction factor using 4th satellite • (like solving multiple equations...will only be one solution that satisfies all equations)

  11. Error Sources • Satellite errors • satellite position error • atomic clock, though very accurate, not perfect. • Atmosphere • Electro-magnetic waves travels at light speed only in vacuum. • The ionosphere and atmospheric molecules change the signal speed. • Multi-path distortion • signal may "bounce" off structures nearby before reaching receiver – the reflected signal arrives a little later. • Receiver error: Due to receiver clock or internal noise. • Selective Availability

  12. Poor Ideal GPS - Sources of Error • Satellite Coverage in Sky • Position Dilution of Precision (PDOP)

  13. GPS - Selective Availability • A former significant source of error • Error intentionally introduced into the satellite signal by the U.S. Dept. of Defense for national security reasons • Based on Clinton’s order, Selective Availability turned off early May 2, 2000

  14. SatelliteClocks 0 6 12 18 24 30 Orbit Error Receivers Atmosphere Meters GPS - Error Budget • Example of some typical observed using a consumer GPS receiver: • Typical observed errors • satellite clocks 0.6 meters • orbit error 0.6 meters • receiver errors 1.2 meters • atmosphere 3.7 meters • Total 6.1 meters • Multiplied by PDOP (1 - 6) 6.1 - 36.6 meters

  15. GPS - Error Correction • 2 Methods: • Point Averaging • Differential Correction

  16. Averaged Location GPS - Point Averaging • This figure shows a successive series of positions taken using a receiver kept at the same location, and then averaged

  17. ~ 300 miles (~ 480 km) or less Base station (known location) Rover receiver GPS - Differential Correction • Differential correction collects points using a receiver at a known location (known as a base station) while you collect points in the field at the same time (known as a rover receiver) • Any errors in a GPS signal are likely to be the same among all receivers within 300 miles of each other

  18. GPS - Differential Correction • The base station knows its own location • It compares this location with its location at that moment obtained using GPS satellites, and computes error • This known error (difference in x and y coordinates) is applied to the rover receiver (hand-held unit) at the same moment Example: Base Station File Time GPS Lat GPS Long Lat. error Long. error 3:12.5 3:13.0 3:13.5 3:14.0 3:14.5 3:15.0 35.50 35.05 34.95 36.00 35.35 35.20 79.05 78.65 79.55 80.45 79.30 79.35 .5 .05 -.05 1.0 .35 .20 .5 -.35 .55 1.45 .30 .35

  19. GPS - Differential Correction • GPS error when using differential correction: 1 – 3 meters • There are two ways that differential correction can be applied: • Post-processing differential correction • Does the error calculations after the rover has collected the points • Real-time differential correction • Done in real time by receiving a broadcasted correction signal (usually expensive), requiring other hardware (not just a consumer GPS receiver)

  20. GPS Applications • Generating mapped data for GIS databases • “traditional” GIS analysts & data developers • travel to field and capture location & attribute information cheaply (instead of surveying) • Other uses (many in real time): • 911/firefighter/police/ambulance dispatch • car navigation • roadside assistance • business vehicle/fleet management • mineral/resource exploration • wildlife tracking • boat navigation • Recreational • Ski patrol/medical staff location monitoring

  21. Garmin’s cheapest receivers Garmin’s Forerunner 201: A watch that uses GPS to determine current speed, average speed, exact distance traveled, etc. ( ) Basic features also available in the Forerunner 101 ($115). http://www.garmin.com/products/forerunner201/ Garmin’s iQue 3600 PDA: http://www.garmin.com/products/iQue3600/

  22. Garmin’s Outdoor GPS Receivers:etrex series Basic GPS Garmin makes a host of GPS receivers for outdoor sports enthusiasts. http://www.garmin.com/outdoor/products.html

  23. Garmin’s Outdoor GPS Receivers: Etrex Legend C ($375) “Along with the Etrex Vista C, is one of Garmin's smallest, least expensive products to combine a color TFT display and advanced GPS routing capabilities in a waterproof design.” --is WAAS enabled --has USB port for downloading maps from Garmin’s MapSource CD library Etrex Vista C ($430) --has a TFT (thin-film transistor, with 1-4 tranistors controlling each pixel; it is the highest-definition flat-panel technique) display --WAAS enabled --has USB port for downloading maps from Garmin’s MapSource library

  24. Bluetooth GPS Receivers Teletype’s Mini-bluetooth GPS receiver ($175) http://www.mightygps.com/Manufacturer/minibluetooth.htm Teletype’s USB GPS receiver for Laptops ($170) http://www.teletype.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=1250&Category_Code=

  25. HP’s Ipaqs and other PDAs with GPS software Hewlett-Packard’s new iPAQ h1945 PDA Now comes equipped with a hp GPS receiver and navigation system ($500) http://www.shopping.hp.com/cgi-bin/hpdirect/shopping/scripts/product_detail/product_detail_view.jsp?BV_SessionID=@@@@0280349227.1102102313@@@@&BV_EngineID=ccckadddfdjlkdgcfngcfkmdflldfgg.0&landing=null&category=handhelds&subcat1=classic_performance&product_code=PF527A%23ABA&catLevel=3 Garmin’s iQue 3600 PDA: http://www.garmin.com/products/iQue3600/

More Related