1 / 7

We need T 1 which we obtain from:

johnwhite
Download Presentation

We need T 1 which we obtain from:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 1. A coin of mass m=5.0 g is dropped from a height of {h} m. If it reaches a terminal velocity of {v} m/s, and the rest of the energy is converted to heating the coin, what is the change in temperature (in °C) of the coin? (The specific heat of copper is 387 J/kg °C and take the gravitational acceleration g=10 m/s2.) 2. An amount of {n} moles of an ideal gas expands isothermally at 100°C to {f} times its initial volume. Find the heat flow into the system (in kilo joule). 3. A total amount of heat {Q}J is added to a substance of a mass{ m} Kg. Initially the substance is solid of a melting temperature 313 K. After adding the heat, the substance is completely transformed to liquid at 357 K. If the specific heat of the liquid is c=1200 J/(Kg.K), what is the latent heat of this substance (give answer in terms of 103 J/Kg)?

  2. 4. Consider {n} mol of an ideal gas undergoing a cyclic process as shown in the Figure . The process labeled b is isothermal with a temperature {T} K. What is the work done by the system through the cycle (your answer in kJ)? (1L=10-3 m3, 1kJ=1000 J, 1kPa= 1000 pa) 5. Suppose {n} mol of an ideal gas undergoing a cyclic process as shown in the Figure . The process labeled b is isothermal with a temperature Tb=1000 K. If the specific heat at constant volume is CV=15.0 J/ (mol K), what is the heat Qa absorbed during the process (a) at constant volume?. (Give your answer in kJ, 1kJ=1000 J) We need T1 which we obtain from:

  3. 6. A cylinder with a movable piston contains 0.45 mol of Ar (Ar=Argon) at initial pressure of {PI} kPa and initial volume of 12.0 L. The gas is compressed to a final state of pressure {Pf} kPa and final volume of 6.0 L. Calculate the change in internal energy of the gas (in kJ=kilojoules). 7. A Carnot cycle operates at a reservoir of Tc= 273 k and a reservoir of higher yet not known temperature Th . If heat is rejected into water at a rate of 0.071 W and work is done at rate 0.054 W, what is the temperature Th ? 8.A heat pump absorbs heat from the outside air at (–10C) and transfers it into a home at a temperature of (30C). Determine the maximum COP of the heat pump.

  4. 9. Two kilograms of water at 100°C is converted to steam at 1 atm. Find the work done (in J) by the steam. (The density of steam at 100°C is 0.598 kg/m3, density of water is 1000 kg/m3) 10. An ideal gas is allowed to expand adiabatically until its volume increases by 50%. By approximately what factor is the pressure reduced? ( = 5/3.) 11. A gas expands at constant pressure of 2.0x105` Pa (1Pa=1N/m2) and the volume changes by 0.04 m3 . The heat added to the gas is 1.2x104 J and the internal energy of the final state state is 2.6x104 J. The internal energy of the initial state is (in J): 12. A gas expands as shown in the graph. If the heat taken in during this process is 1.02x106  J, the change in internal energy of the gas (in J) is

  5. 13. A 300-g glass thermometer initially at 25°C is put into 200 cm3 of hot water at 95°C. Find the final temperature (in °C) of the thermometer, assuming no heat flows to the surroundings. (The specific heat of glass is 836 J/(kg.. °C.) 14. How much heat, in joules, is required to convert 1.00 kg of ice at 0°C into steam at 100°C? 15. Five gas molecules are found to have speeds of 100, 200, 300, 400, and 500 m/s. The rms speed (in m/s) is 16. Find the specific heat (in cal/mole . K) of a gas kept at constant volume when it takes 1.0  104 J of heat to raise the temperature of 5.0 moles of the gas 200 K above the initial temperature

  6. 17. One mole of a diatomic ideal gas is heated from 20 C to 120 C at constant pressure. The change of its internal energy is: 18. A sample of an ideal gas has the macroscopic parameter (P,V,T). A second sample has (2P,2V,2T). If the average molecular kinetic energy for the first sample is <KE>, then the average molecular kinetic energy of the second sample is: 19. The rms speed for molecules of a gas at 300 k is 1900 m/s. If the temperature of the gas is increased to 606 k, the rms speed becomes: 20. A gasoline engine absorbs 2500 J of heat and performs 1000 J of mechanical work in each cycle. The amount of heat expelled in each cycle is 21. A refrigerator has a coefficient of performance of 4. If the refrigerator absorbs 30 cal of heat from the cold reservoir in each cycle, the heat expelled (in cal) into the heat reservoir is

  7. 22. A heat engine absorbs 2500 J of heat from a hot reservoir and expels 1000 J to a cold reservoir. When it is run in reverse, with the same reservoirs, the engine pumps 2500 J of heat to the hot reservoir, requiring 1500 J of work to do so. Find the ratio of the work done by the heat engine to the work done by the pump. Is the heat engine reversible? In reverse: 23. A heat engine operates between two reservoirs with efficiency of 35%. If heat Qc=6500 J is exhausted to the low temperature reservoir in a cycle, how much heat is extracted from the high temperature reservoir in one cycle?

More Related