1 / 58

An Introduction to Cost Terms and Purposes

An Introduction to Cost Terms and Purposes. Chapter 2. Learning Objectives. Define and illustrate a cost object Distinguish between direct costs and indirect costs Explain cost drivers, variable costs and fixed costs Understand why unit costs must be interpreted with caution

jodie
Download Presentation

An Introduction to Cost Terms and Purposes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. An Introduction to Cost Terms and Purposes Chapter 2

  2. Learning Objectives • Define and illustrate a cost object • Distinguish between direct costs and indirect costs • Explain cost drivers, variable costs and fixed costs • Understand why unit costs must be interpreted with caution • Distinguish among service-sector, merchandising-sector and manufacturing-sector companies • Differentiate between capitalised costs and revenue costs • Describe the three categories of stock commonly found in many manufacturing-sector companies • Explain why different ways of computing product costs are appropriate for different purposes

  3. Learning Objective 1 Define and illustrate a cost object

  4. Cost objects

  5. Learning Objective 1 (continued) • Cost and Cost Terminology • Costis a resource sacrificed or forgone to achieve a specific objective. • It is usually measured as the monetary amount that must be paid to acquire goods and services. • An actual costis the cost incurred (a historical cost) as distinguished from budgeted costs. • A cost objectis anything for which a separate measurement of costs is desired.

  6. Learning Objective 1 (continued) • There are two basic stages of accounting for costs: • Cost accumulation • Cost assignment to various cost objects Cost Object Cost Accumulation Cost Object Cost Object Cost Assignment

  7. Learning Objective 1 (continued) • Cost accumulation is the collection of cost data in some organised way by means of an accounting system. • Cost assignment is a general term that encompasses ... • tracing accumulated costs to a cost object, and • allocating accumulated costs to a cost object.

  8. Learning Objective 2 Distinguish between direct costs and indirect costs

  9. Learning Objective 2 (continued) • Direct Costs • Direct costs of a cost object are those that are related to a given cost object (product, department, etc.) and that can be traced to it in an economically feasible way. • Cost-Tracing describes the assignment of direct costs to the particular cost object. • Indirect Costs • Indirect cost are related to the particular cost object but cannot be traced to it in an economically feasible way. • Cost allocation describes the assigning of indirect costs to the particular cost object.

  10. Direct/indirect costs

  11. Learning Objective 2 (continued) • Gnomes Ltd has two production departments, Assembly and Finishing, and two service departments, Maintenance and Personnel. • Direct and Indirect Costs • Direct Costs: Maintenance Department €30,000 Personnel Department €24,600 Assembly Department €70,000 Finishing Department €50,000 • Assume that Maintenance Department costs are allocated equally among the production departments. • How much is allocated to each department?

  12. Learning Objective 2 (continued) Maintenance €30,000 Finishing Direct Costs €50,000 Assembly Direct Costs €70,000 €15,000 €15,000 Allocated

  13. Learning Objective 2 (continued) • Several factors affect the classification of a cost as direct or indirect: • The materiality (the amount) of the cost in question • Available information-gathering technology • Design of operations • Contractual arrangements • The direct/indirect classification depends on the choice of the cost object.

  14. Learning Objective 3 Explain cost drivers, variable costs and fixed costs

  15. Cost-drivers

  16. Learning Objective 3 (continued) • Cost Behaviour Patterns • Variable costs change in total in proportion to changes in the related level of total activity or volume. • Fixed costs do not change in total for a given time period despite wide changes in the related level of total activity or volume.

  17. Learning Objective 3 (continued) • Assume that Kruger Bicycles buys handlebars at €52 for each of its bicycles. • Total handlebar cost is an example of a cost that changes in total in proportion to changes in the number of bicycles assembled (variable cost). • e.g.. the total handlebar cost when 1,000 bicycles are assembled is: • 1,000 units × €52 = €52,000 • e.g. the total handlebar cost when 3,500 bicycles are assembled is: • 3,500 units × €52 = €182,000

  18. Learning Objective 3 (continued) • Total costs (€000) €182 €52 0 1,000 3,500 Units

  19. Learning Objective 3 (continued) • Assume that Kruger Bicycles incurred €94,500 in a given year for the leasing of its plant. • This is an example of fixed costs with respect to the number of bicycles assembled. • These costs are unchanged in total over a designated range of the number of bicycles assembled during a given time span. • e.g. the leasing (fixed) cost per bicycle when Kruger assembles 1,000 bicycles is: • €94,500 ÷ 1,000 = €94.50 • e.g. the leasing (fixed) cost per bicycle when Kruger assembles 3,500 bicycles is: • €94,500 ÷ 3,500 = €27

  20. Learning Objective 3 (continued) • Cost Drivers • A cost driver is a factor, such as the level of activity or volume, that causally affects costs (over a given time span). • The cost driver of variable costs is the level of activity or volume whose change causes the (variable) costs to change proportionately. • The number of bicycles assembled is a cost driver of the cost of handlebars. • Relevant Range • is the band of the level of activity or volume in which a specific relationship between the level of activity or volume and the cost in question is valid.

  21. Learning Objective 3 (continued) • Assume that fixed (leasing) costs are €94,500 for a year and that they remain the same for a certain volume range (1,000 to 5,000 bicycles). • i.e. 1,000 to 5,000 bicycles is the relevant range. Total cost (€ 000) Relevant range €94,5 0 1000 5000 Volume

  22. Direct/indirect – variabel/fixed costs

  23. Learning Objective 4 Understand why unit costs must be interpreted with caution

  24. Learning Objective 4 (continued) • Total Costs and Unit Costs • A unit cost (also called an average cost) is computed by dividing some amount of cost total by some number of units. • The ‘units’ may be expressed in various ways: • Hours worked • Packages delivered • Bicycles assembled • i.e. the unit cost (leasing and handlebars) when Kruger Bicycles assembles 1,000 bicycles is: • Total fixed cost €94,500 + Total variable cost €52,000 = €146,500 • €146,500 ÷ 1,000 = €146.50

  25. Learning Objective 4 (continued) Total cost (€ 000) €146,5 €94,5 0 1000 volume

  26. Learning Objective 4 (continued) • Use Unit Costs Cautiously • Assume that Kruger Bicycles’ management uses a unit cost of €146.50 (leasing and handlebars). • Management is budgeting costs for different levels of production. • What is their budgeted cost for an estimated production of 600 bicycles? • What is their budgeted cost for an estimated production of 3,500 bicycles?

  27. Learning Objective 4 (continued) • 600 × €146.50 = €87,900 • 3,500 × €146.50 = €512,750 • What should the budgeted cost be for an estimated production of 600 bicycles? • Total fixed cost € 94,500 Total variable cost (€52 × 600) = € 31,200 Total €125,700 • €125,700 ÷ 600 = €209.50 • Using a cost of €146.50 per unit would underestimate actual total costs if output is below 1,000 units.

  28. Learning Objective 4 (continued) • What should the budgeted cost be for an estimated production of 3,500 bicycles? • Total fixed cost € 94,500 Total variable cost (52 × 3,500) = € 182,000 Total €276,500 • €276,500 ÷ 3,500 = €79.00 • Using a cost of €146.50 per unit instead of €79.00 would overestimate actual total costs if output is above 1,000 units. • For decision making, managers should think in terms of total costs rather than unit costs.

  29. Learning Objective 5 Distinguish among service-sector, merchandising-sector and manufacturing-sector companies

  30. Learning Objective 5 (continued) • Manufacturing • Manufacturing-sector companies purchase materials and components and convert them into finished goods. • A manufacturing company must also develop, design, market, and distribute its products. • Merchandising • Merchandising-sector companies purchase and then sell tangible products without changing their basic form. • Service Companies • provide services or intangible products to their customers.

  31. Learning Objective 6 Differentiate between capitalised costs and revenue costs

  32. Learning Objective 6 (continued) • Types of Stock • Manufacturing-sector companies typically have one or more of the following three types of inventories: • Direct materials – direct materials in stock and awaiting use in the manufacturing process. • Work-in-progress – goods partially worked on but not yet fully completed. • Finished goods – goods fully completed but not sold. • Merchandising-sector companies hold only one type of stock – the product in its original purchased form. • Service-sector companies do not hold stocks of tangible products. • Classification of manufacturing Costs • Direct materials costs • Direct manufacturing labour costs • Indirect manufacturing costs

  33. Learning Objective 6 (continued) • Direct materials costs • Direct materials costs are the acquisition costs of all materials that eventually become part of the cost object. • Direct materials costs can be traced economically. • Purchase costs include inward delivery charges, VAT and other customs duties. • Direct manufacturing labour costs • Direct manufacturing labour costs include the compensation of all manufacturing labour that can be traced to the cost object in an economically feasible way. • Wages and fringe benefits paid to: • Machine operators • Assembly-line workers

  34. Learning Objective 6 (continued) • Indirect manufacturing costs • Indirect manufacturing costs are all manufacturing costs that are considered to be part of the cost object, but that cannot be traced to that cost object in an economically feasible way. • Other terms for this cost category include manufacturing overhead costsand factory overhead costs. • Capitalised Costs • Capitalised costsare all costs of a product that are regarded as an asset when they are incurred and then become cost of goods sold when the product is sold. • For manufacturing-sector companies, all manufacturing costs are capitalised costs.

  35. Learning Objective 6 (continued) • Capitalised costs (direct materials, direct labour and indirect manufacturing costs) are included in work-in-progress and finished goods stock. • Capitalised costs flow to the P&L account as cost of the goods sold. • For merchandising-sector companies, capitalised costsare the costs of purchasing the goods which are resold in their same form. • For service-sector companies, the absence of stock means there are no capitalised costs.

  36. Learning Objective 6 (continued) • Revenue Costs • Revenue costs are all costs in the P&L account other than cost of goods sold. • Revenue costs are recorded as expenses of the accounting period in which they are incurred. • For manufacturing-sector companies, revenue costs include all non-manufacturing costs (research and development, distribution, etc.). • For merchandising-sector companies, revenue costs include all costs not related to the cost of goods purchased for resale. • For service-sector companies, all of their costs are revenue costs.

  37. Learning Objective 7 Describe the three categories of stock commonly found in many manufacturing-sector companies

  38. Learning Objective 7 (continued) • Categories of Stock • The three categories of stock found in many manufacturing companies depict stages in the conversion process: • materials • work-in-progress • finished goods

  39. Learning Objective 7 (continued) • Direct materials capitalised costs are used to calculate the cost of materials used. Opening direct materials stock • Purchases of direct materials • Closing direct materials stock • Direct materials used

  40. Learning Objective 7 (continued) • Work-in-progress capitalised costs are used to calculate the cost of goods manufactured. Opening work-in-progress stock • Manufacturing costs incurred during the period • Closing work-in-progress stock • Cost of goods manufactured

  41. Learning Objective 7 (continued) • Finished goods capitalised costs are used to calculate the cost of goods sold. Opening finished goods stock • Cost of goods manufactured • Closing finished goods stock • Cost of goods sold

  42. Learning Objective 7 (continued) • Kruger Bicycles had €50,000 of direct materials stock at the beginning of the period. • Purchases during the period amounted to €180,000 and ending stock was €30,000. • How much direct materials were used? • €50,000 + €180,000 – €30,000 = €200,000

  43. Learning Objective 7 (continued) • Direct labour costs incurred were €105,500. • Indirect manufacturing costs were €194,500. • What are the total manufacturing costs incurred? • Direct materials used €200,000 Direct labour 105,500 Indirect manufacturing costs 194,500 Total manufacturing costs €500,000

  44. Learning Objective 7 (continued) • Assume that the work-in-progress stock at the beginning of the period was €30,000, and €35,000 at the end of the period. • What is the cost of goods manufactured? Opening work-in-progress € 30,000 • Total manufacturing costs 500,000 • Closing work-in-progress 35,000 • Cost of goods manufactured €495,000

  45. Learning Objective 7 (continued) • Assume that the finished goods stock at the beginning of the period was €10,000, and €15,000 at the end of the period. • What is the cost of goods sold? Opening finished goods € 10,000 • Cost of goods manufactured 495,000 • Closing finished goods 15,000 • Cost of goods sold €490,000

  46. Learning Objective 7 (continued) Work-in-progress Opening balance 30,000 495,000 Direct mtls. used 200,000 Direct labour 105,500 Indirect mfg. costs 194,500 Closing balance 35,000

  47. Learning Objective 7 (continued) Work-in-progress Finished Goods 495,000 10,000 490,000 495,000 15,000 Cost of Goods Sold 490,000

  48. Schedule of Cost of Goods Sold • Opening direct materials stock • Purchases of direct materials • Available for use • Closing direct materials stock • Direct materials used • Direct manufacturing labour • Indirect manufacturing costs (Variable and Fixed) • Manufacturing costs incurred during the current period • Opening finished goods stock • Goods available for sale • Closing finished goods stock • Cost of goods sold

  49. Income Statement • Revenues (Sales) • Cost of goods sold • Gross margin • Operating costs • Operating Profit

More Related