1 / 24

Fans Part 1

Fans Part 1. Reading: Chapter 5 in Henderson/Perry Greenheck Product Application Guide Dwyer Manometer Guide AMCA Fan Curve Guide. Dr. C. L. Jones Biosystems and Ag. Engineering . Pumps, Fans, Compressors--Turbomachines.

jock
Download Presentation

Fans Part 1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Fans Part 1 • Reading: • Chapter 5 in Henderson/Perry • Greenheck Product Application Guide • Dwyer Manometer Guide • AMCA Fan Curve Guide Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  2. Pumps, Fans, Compressors--Turbomachines • Turbomachines: change energy level of flowing fluid by means of momentum exchange • Wide spread in ALL industries • Power units: cars/trucks, tractors • Computers • Grain elevators • Oilfield • Medical facilities • Food processing • And……. Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  3. Pumps, Fans, Compressors—Turbomachines (Review) • Differences between pumps, fans, compressors • Pumps: move liquids • Fans: move gases with little increase in pressure • Compressors: move gases with greater increase in pressure Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  4. Fan Standards • ASHRAE: American Society of Heating, Refrigeration, and Air conditioning Engineering…research and standards • AMCA: Air Movement and Control Association…standards Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  5. Fan Operation • Fans cause pressure increase by: • Centrifugal force created by rotation of the column of air trapped between two blades • Kinetic energy is supplied to the air through the impeller • Total pressure = velocity head + static pressure Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  6. Selection Considerations • Quantity of air to be moved per unit time • Estimated system resistance and expected variations • Amount of noise permitted • Space available for fan • Economic implications Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  7. Fan Classification • Designated as dynamic pumps • Centrifugal • Further classification by entry and exit of fluid/gas through impeller • 4 aerodynamic classifications: • Axial flow • Radial flow : referred to as “centrifugal fan” • Cross flow • Mixed flow Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  8. Axial-flow Fans • Propeller • Tube-Axial • Vane-Axial Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  9. Propeller Fans • Used in many agricultural ventilation applications with free delivery or low pressure conditions • Propeller has a pitch (twist). Distance of air travel depends on pitch and # of blades • Warping the blades prevents back flow of air (page 121) Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  10. Tube-Axial Fans • Wheel or impeller within a tube • Blades are warped for efficiency • Operates at higher pressures and higher ME than propeller fans Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  11. Vane-Axial Fans • Like a tube axial with guide vanes before or after the impeller • Higher pressures and efficiencies ( up to 2200 psi and 85% +) because… • Vanes direct air flow through a gradual turn until tangential velocity component is eliminated Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  12. Centrifugal Fans • Consists of wheel or rotor within a spiral housing • Air makes a 90 degree turn • Forward-curved-tip • Backward-curved-tip • Straight or radial tip Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  13. Straight or Radial-Tip Fans • 6 – 20 blades • Blades are 2 to 3 x as long as they are wide • Larger housing, more expensive • Can handle dirty air and higher pressures Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  14. Backward-Curved-Tip Fans • Approx. 12 blades • Flat and tilted backwards • High speed fan with self-limiting power • If sized correctly, motor won’t overheat if conditions change (curve pg. 132) • Most efficient • Cannot handle dirty air Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  15. Forward-Curved-Tip Fans • Up to 60 blades • Narrow radially but wide parallel to shaft • Face forward in direction of rotation, scoop • Low-speed, moderate pressures, can be unstable • Clean air only • Lowest noise!!!!! • Used in many furnace blowers Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  16. Cross-Flow (or Tangential) Fans • Uniform discharge, high air rate • Use in ovens, baseboard heaters, unit heaters, drying equipment, kitchen hoods • Larger housing, more expensive • Can handle dirty air and higher pressures Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  17. Mixed-Flow Fans • Aka In-line or Tubular Centrifugal fans • Combines features of centrifugal and vane-axial fans • Straight-through air flow but performance characteristics of centrifugal • Quiet like centrifugal • Used as exhaust fans in homes, commercial and agricultural Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  18. Performance • Tested at shutoff and free delivery conditions • Shutoff: discharge is blanked off • Free delivery: outlet resistance is 0 Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  19. Fan Curves • Manufacturer provides fan curve • Predicts the pressure-flow rate performance of each fan • Choose fan according to volumetric flow rate for your system pressure drop • Choose fan with peak efficiency at or near your operating point • Sometimes manufacturers use tables instead (Greenheck Handout) Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  20. Fan Curves • Fans follow the affinity laws (ASHRAE) Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  21. Fan Law Example • Fan speed N changesfrom 600 to 650 rpm fora fan of a given size Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  22. Fan Curves • If we know static pressure and outlet area, we can find total pressure: • Total pressure includes static and velocity pressure • If we know power, static efficiency, or total efficiency, the others can be calculated: Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  23. Sound Power Levels • Energy transfer Sound • In dB: • W0 = 1 x 10-12 Watts • W = power (W) • For additional units, see eqtn. 5.6 (H/P) • Sones: One sone represents the loudness of a 1 kHz tone at 40 dB SPL. Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

  24. More Fans… • Fans in parallel: moves curve to the right…pressure stays the same, flow rate is the sum • Fans in series: moves curve up…flow rate stays the same, pressure is the sum Dr. C. L. Jones Biosystems and Ag. Engineering BAE2023

More Related