1 / 11

Quantification of Ventilation Activity in V/Q Scanning

Quantification of Ventilation Activity in V/Q Scanning. Michelle Lax Lincoln County Hospital. Background. We wanted to accurately determine the ventilation activity inhaled for a VQ scan. WHY? for accurate reporting of administered activity to check we aren’t exceeding ARSAC limits

jered
Download Presentation

Quantification of Ventilation Activity in V/Q Scanning

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Quantification of Ventilation Activity in V/Q Scanning Michelle Lax Lincoln County Hospital

  2. Background • We wanted to accurately determine the ventilation activity inhaled for a VQ scan. • WHY? • for accurate reporting of administered activity • to check we aren’t exceeding ARSAC limits • to determine when to delay perfusion scan

  3. Estimation of Ventilation Activity • Technigas is inhaled for vent part of V/Q scan • ARSAC limit = 40MBq (eff. dose = 0.6mSv). • GM tube to monitor patient up to 100cps • 10sec posterior ventilation image • HR sensitivity = 70cps/MBq • GP sensitivity = 120cps/MBq • Round down to 50 and 100 cps/MBq • to account for patient attenuation • therefore estimating higher activity

  4. Example 10sec vent posterior image = 12 kcnts (1200cps) GP approx. sensitivity = 100cps/MBq  Estimated Activity = 12 MBq

  5. Example 10sec vent posterior image = 8 kcnts (800cps) HR approx. sensitivity = 50cps/MBq  Estimated Activity = 16MBq Estimated value used to determine whether the perfusion scan can commence straight away Rule of thumb: perf cnts (100MBq) should be 3 - 5 times vent cnts

  6. BUT…... 1. We need to account for attenuation differences between anterior and posterior need to use geometric mean 2. We need to calculate patient specific sensitivity

  7. Theory of Vent Activity Program • Protocol_tool • Query: counts, duration, date, time of ventilation and perfusion ant and post images NB: ACQTIME in seconds from 00:00hrs • Convert to counts per second • Calc geometric mean of vent and perf cnts • Ventgeometric mean = (Ventant x Ventpost) • (Perf&Vent)geometric mean = (Perfant x Perfpost)

  8. Theory of Vent Activity Program • Decay correct Ventgeo to time of Perf scan (ask operator: Were both completed? Were they on the same day? Which was first?) • (Perf&Vent)geo-Ventdecay corr= Perfonly • Calculate camera sensitivity for this patient (ask operator for perf activity, including residual activity) • Sensitivity (cps/MBq) = Perfonlycnts / Perf Act • Vent Act = Vent cnts / Sensitivity

  9. Analysis of Ventilation Activity • No significant difference in vent activity between using posterior counts or geometric mean (p=0.8) • A significant difference in vent activity between using camera or patient sensitivity (p<0.001) • Comparing vent activity calculated from program to estimated vent activity: • % Activity Increase = 39.3  14.2 % • Smallest Error: 9  12.75 MBq (+3.75 MBq) • Largest Error: 24  45.65 MBq (+21.65 MBq) (Mean Activity Increase = 10 MBq)

  10. Conclusions • A simple program has been written to calculate accurate ventilation activities. • Found we had been underestimating ventilation activity. • Changed action level for delaying Perfusion scan to when estimated ventilation activity (from 10sec posterior counts) = 25MBq.

More Related