1 / 15

Equilibrium and Elasticity

Equilibrium and Elasticity. Equilibrium :. Center of Gravity :. The Center of Gravity of an object The point of an object from which it could be suspended without tending to rotate. The point where all the mass of an object can be considered to be located.

jdavenport
Download Presentation

Equilibrium and Elasticity

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Equilibrium and Elasticity Equilibrium:

  2. Center of Gravity: • The Center of Gravity of an object • The point of an object from which it could be suspended without tending to rotate. • The point where all the mass of an object can be considered to be located. • CG does not need to be located within the physical object! • Horseshoe, for example • usually easily identified from symmetry.

  3. L D Example: A child walks on a massive (90 kg) 6.0 m plank which rests on two saw horses separated by D = 1.5m equally spaced from the center of the plank. If the plank is not to tip over when the child walks to the end of the plank, what is the most mass the child can have?

  4. How to approach an equilibrium problem: For each object • Draw the forces that act on the object (i.e. draw a free-body diagram) • Choose a convenient set of coordinate axis and resolve all forces into components. Watch carefully for appropriate use of +/- signs. • Pick a convenient axis to calculate your torques about. • Set the sum of the force components along each axis equal to 0. • Set the sum of the torques equal to 0 • Solve the resulting equations for the unknown quantity or quantities.

  5. q Example: A ladder 5.00 m long is leaning against a frictionless wall with its lower end 3.00 m away from the wall. The ladder weighs 180N, and an 800 N man is a third of the way up the ladder. What forces do the wall and the ground exert on the ladder? What is the minimum coefficient of friction necessary for the ladder to not slip?

  6. Example : A 60 kg woman stands at the end of a uniform 4m, 50 kg diving board supported as shown. Determine the forces exerted by the two supports. 4.00 m .800 m

  7. Stress, Strain and Elastic Moduli • material property of “stretchiness/springiness” • -> how materials respond to stress compression tension shear • Elastic modulus = stress/strain (approximately constant) • strain: deformation = fractional change • stress: force per area • property of type of material

  8. l0 l0 A A compression tension l l A A • Young’s Modulus: how things stretch (elastically) • tensile stress: force per area = F/A • strain: fractional change in length • = change in length per original length = Dl/l0 • Elastic modulus = stress/strain • Young’s modulus (for stretching in one direction)

  9. Bulk Modulus: compression of solids, liquids and gases • bulk stress: force per area = F/A = pressure p ( 1 N/m2 = 1 Pa) • 1 atm = 1.013 E5 Pa = 14.7 lb/in2 • bulk strain: DV/V0 • Bulk Modulus B relates small change in pressure to bulk strain

  10. Shear Modulus: • stress: force per area = F||/A x F A h f F • shear strain cannot be supported in fluids (gas, liquid)

  11. Example: A steel cable 2.0 m long has a cross section area of 0.30 cm2. A 550 kg mass is suspended from the cable. Calculate the stress, the resulting strain, and the elongation of the cable. Example: A hydraulic press contains 0.25 m3 of oil is subjected to a pressure increase of Dp = 1.6E7 Pa B = 5.0E9 Pa Find the decrease in volume.

  12. Elastic Limit: the maximum stress (force) which can be applied to an object without resulting in permanent deformation. Plastic Deformation or Plastic Flow: the permanent deformation which results when a material’s elastic limit has been exceeded. Ultimate strength: greatest tension (or compression or shear) the material can withstand with breaking *snap*, tearing, fracturing etc. a.k.a. Breaking Stress or Tensile Strength. A malleable or ductile material has a large range of plastic deformation. Fatigue: small defects reduce materials strength well below original strength. Elastic Hysteresis: strain depends on material “history” stress strain

  13. Example: A copper wire1.0 mm in diameter and 2.0 m long is used to support a mass of 5.0 kg. By how much does this wire stretch under this load? What is the maximum mass which can be supported without exceeding copper’s elastic limit? Y = 1.1x1011 Pa elastic limit = 1.5x108 Pa

  14. From Lab • Force: suspended weight • Area: cross section of wire • elongation causes cylinder to rotate d 2q DL q

More Related