1 / 52

IP Sec

IP Sec. Basics. Network-level: all IP datagrams covered Mandatory for next-generation IP (v6), optional for current-generation (v4) Authentication-only or confidentiality too. Architecture & Concepts. Host or gateway implementation Tunnel vs. Transport mode Security association (SA)

jcooper
Download Presentation

IP Sec

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. IP Sec CSE 5349/49

  2. Basics • Network-level: all IP datagrams covered • Mandatory for next-generation IP (v6), optional for current-generation (v4) • Authentication-only or confidentiality too CSE 5349/7349

  3. Architecture & Concepts • Host or gateway implementation • Tunnel vs. Transport mode • Security association (SA) • Security parameter index (SPI) • Security policy database (SPD) • SA database (SAD) • Encapsulating security payload (ESP) • Authentication header (AH) CSE 5349/7349

  4. IPSec Placement • Host implementation • OS integrated, modify the IP code • Bump-in-the-stack • Layer between data link and IP • Bump-in-the-wire • IPSec outside host, in a router/firewall • Least intrusive CSE 5349/7349

  5. New IP Header AH or ESP Header Orig IP Header TCP Data Tunnel vs. Transport Mode Encrypted Tunnel Gateway Gateway Encrypted Unencrypted Unencrypted A B CSE 5349/7349

  6. Transport Mode Security IP header IP options IPSec header Higher layer protocol • ESP protects higher layer payload only • AH can protect IP headers as well as higher layer payload ESP Real IP destination AH CSE 5349/7349

  7. Tunnel Mode Security Outer IP header IPSec header Inner IP header Higher layer protocol • ESP applies only to the tunneled packet • AH can be applied to portions of the outer header ESP Real IP destination Destination IPSec entity AH CSE 5349/7349

  8. Security Association - SA • One way relationship (uni-directional) • Determine IPSec processing for senders • Determine IPSec decoding for destination • SAs are not fixed! Generated and customized per traffic flows (manual as well as dynamic) • If manual, no lifetime; dynamic has lifetime CSE 5349/7349

  9. Security Parameters Index - SPI • Can be up to 32 bits large • The SPI allows the destination to select the correct SA under which the received packet will be processed (according to the agreement with the sender) • The SPI is sent with the packet by the sender • SPI + Dest IP address + IPSec Protocol (AH or ESP) uniquely identifies a SA CSE 5349/7349

  10. SA Database - SAD • Holds parameters for each SA • Lifetime of this SA • AH and ESP information • Tunnel or transport mode • Every host or gateway participating in IPSec has their own SA database CSE 5349/7349

  11. SA Bundle • More than 1 SA can apply to a packet • Example: ESP does not authenticate new IP header. How to authenticate? • Use SA to apply ESP w/out authentication to original packet • Use 2nd SA to apply AH CSE 5349/7349

  12. Security Policy Database - SPD • What traffic to protect? • Has incoming traffic been properly secured? • Policy entries define which SA or SA bundles to be used on IP traffic • Each host or gateway has their own SPD • Index into SPD by Selector fields • Dest IP, Source IP, Transport Protocol, IPSec Protocol, Source & Dest Ports, etc. CSE 5349/7349

  13. SPD Entry Actions • Discard • Do not let in or out • Bypass • Outbound: do not apply IPSec • Inbound: do not expect IPSec • Protect – will point to an SA or SA bundle • Outbound: apply security • Inbound: check that security has been applied CSE 5349/7349

  14. SPD Protect Action • If the SA does not exist • Outbound processing: use IKE to generate SA dynamically • Inbound processing: drop packet CSE 5349/7349

  15. Outbound Processing Outbound packet (on A) A B IP Packet SPD(Policy) SA Database SPI & IPSec Packet … … Send to B Is it for IPSec?If so, which policy entry to select? IPSec processing Determine the SA and its SPI CSE 5349/7349

  16. Inbound Processing A B Inbound packet (on B) SPD(Policy) From A SPI & Packet SA Database … … Use SPI to index the SAD Was packet properly secured? Original IP Packet CSE 5349/7349

  17. Authenticated Header (AH) CSE 5349/49

  18. AH Security • Connectionless integrity • Flow/error control left to transport layer • Data integrity • Authentication • Can “trust” IP address source • Use MAC to authenticate • Anti-replay feature • Integrity check value CSE 5349/7349

  19. Integrity Check Value - ICV • Message authentication code (MAC) calculated over • IP header field that do not change or are predictable • IPSec protocol header minus where the ICV value goes • Upper-level data • Code may be truncated to first 96 bits CSE 5349/7349

  20. AH Header Format Payload Length Next Header (TCP/UDP) Reserved SPI Sequence Number ICV CSE 5349/7349

  21. AH Modes • Tunnel • Transport • Nested headers • Multiple SAs applied to same message • Nested tunnels CSE 5349/7349

  22. Processing Outbound Messages • Insert Next Header and SPI field • Compute the sequence no. field • If processing < 232 message • Increment • Place new value in AH and SAD • Else, • Change keys at wrap around if replay protection is enabled • Else set to 1 CSE 5349/7349

  23. Outbound Processing (cont’d) • If transport mode, change preceding IP header’s Next Header field to AH • If tunnel mode, add the tunnel header • Recompute header length, header checksum etc. • Compute authentication value CSE 5349/7349

  24. Outbound Processing (cont’d)ICV • Calculated on entire IP packet including AH header • Zero out all mutable fields including authentication data field • Get the key from SA • HMAC-MD5-96 or HMAC-SHA-96 • Insert the cryptographic hash code in the AH header CSE 5349/7349

  25. Outbound Processing (cont’d)Fragment the Message • IPSec processing may result in large message which will be fragmented • Transport mode • Source address initiator of the message • Total message authentication before fragmentation • Tunnel mode • Message may have been fragmented already • Authenticate the fragment and further fragment CSE 5349/7349

  26. Input Processing • Identify the inbound SA • If not found, drop the packet • Replay protection check • Drops duplicates within the window • Drops late arrivals outside window • Advances with the receipt of authenticated message CSE 5349/7349

  27. Inbound Processing (cont’d) • Verify authentication data • Authentication hash computed and checked • If no match, discard • Strip off the AH header and continue IPSec processing for any remaining IPSec headers • Either an upper layer protocol header or a tunnel header is encountered CSE 5349/7349

  28. Replay Protection • Sequence number checking • Anti-replay is used only if authentication is selected • Sequence number should be the first check on a packet upon looking up an SA • Duplicates are rejected! Check bitmap, verify if new verify reject Sliding Window size >= 32 0 CSE 5349/7349

  29. Anti-replay Feature • Sequence number counter - 32 bit for outgoing IPSec packets • Anti-replay window • 32-bit (or more) • Bit-map for detecting replayed packets • Window should not be advanced until the packet has been authenticated • Without authentication, malicious packets with large sequence numbers can advance window unnecessarily • Valid packets may get dropped CSE 5349/7349

  30. Encapsulated Security Protocol (ESP) CSE 5349/49

  31. Encapsulated Security Protocol (ESP) • Confidentiality for upper layer protocol • Traffic flow confidentiality • Data origin authentication and connectionless integrity (optional) CSE 5349/7349

  32. ESP Packet Tunnel Mode CSE 5349/7349

  33. Outbound Packet Processing • Form ESP payload • Pad as necessary • Encrypt result [payload, padding, pad length, next header] • Apply authentication • Allow rapid detection of replayed/bogus packets • Allow potential parallel processing - decryption & verifying authentication code CSE 5349/7349

  34. Outbound Packet Processing (cont’d) • Sequence number generation • ICV calculation • ICV includes whole ESP packet minus authentication data field • Implicit padding of ‘0’s between next header and authentication data is used to satisfy block size requirement for ICV algorithm CSE 5349/7349

  35. ESP Transport Example Original IP Header SPI Sequence Number Authentication coverage Payload (TCP Header and Data) Variable Length Encrypted Padding (0-255 bytes) Pad Length Next Header Integrity Check Value CSE 5349/7349

  36. Inbound Packet Processing • Packet decryption • Decrypt [ESP payload,padding,pad length,next header] per SA specification • Processing (stripping) padding per encryption algorithm • Reconstruct the original IP datagram • Authentication verification (optional) CSE 5349/7349

  37. Internet Key Exchange (IKE) CSE 5349/49

  38. Key Management • AH and ESP require encryption and authentication keys • Process to negotiate and establish IPSec SA’s between two entities CSE 5349/7349

  39. Manual Key Management • Mandatory • Useful when IPSec developers are debugging • Keys exchanged offline (phone, email, etc.) • Set up SPI and negotiate parameters • Not scalable CSE 5349/7349

  40. IKE • Use the frame work of ISAKMP • Internet Security Assignment and Key Management Protocol • Developed by NSA • Implements parts of two key management protocols • Oakley and SKEME CSE 5349/7349

  41. IKE - Phases • Used when an outbound packet does not have an SA • Tow phases: • Phase I: Establish an IKE SA (main mode, aggressive mode) • Used to define encryption & authentication of IKE traffic • Multiple IPSec SAs can be established with one IKE SA • Bidirectional • Phase II: Use IKE SA to negotiate IPSec Sas (quick mode) CSE 5349/7349

  42. Phase I – Create IKE SA • Negotiate protection suite • Use Diffie-Hellman to establish shared secret • 3 groups of DH defined • Authenticate the shared secret , IKE SA • Preshared keys (secret) • Digital signatures • Public-keys CSE 5349/7349

  43. IKE Modes • Phase I • Main Mode – flexible, 6 messages • Checks cookies before DH work • Aggressive mode – faster, 3 messages • Open to DoS, doesn’t check cookie before DH work • Used mostly for remote access • Phase II – Quick mode CSE 5349/7349

  44. Oakley Key Exchange • Designed to • Leverage advantages of DH • Fresh keys • Secret never on the transit • Counter DH weaknesses • No information on the Ids of the parties • Man-in-the-middle attack • Computationally intensive CSE 5349/7349

  45. Oakley - Major Features • Cookies to thwart DoS • Nonce to prevent replay • DH for key exchange • Authenticated key exchange • Specification of global parameters for DH CSE 5349/7349

  46. Cookies • Requirements • Depend on specific parties • Only the issuing entity can generate acceptable cookies – implies issuer using local secret • Cookie generation and verification must be fast • Suggested - Hash over IP Src/Dest; UDP Src/Dest; local secret CSE 5349/7349

  47. Initiator Responder SA, CKY-I I R SA, CKY-R NonceI, YI NonceR, YR IDI, HashI IDR, HashR Example: Main Mode Preshared Negotiate IKE SA parameters Exchange items to generate secret Generate SKEYID Send hash digest so peer can authenticate sender CSE 5349/7349

  48. Main Mode Preshared • PRF, Pseudo-Random Function • SKEYID root secret =PRF(preshared-key,Ni|Nr) • SKEYID_d for IPSec SA =PRF(SKEYID,K|CKY-I|CKY-R|0) K is the secret generated by DH • SKEYID_a for IKE message data auth & integrity = PRF(SKEYID,SKEYID_d|K|CKY-I|CKY-R|1) • SKEYID_e use to encrypt IKE messages = PRF(SKEYID,SKEYID_a|K|CKY-I|CKY-R|2) CSE 5349/7349

  49. Main Mode Preshared Hashes • To authenticate each other, each entity generates a hash digest that only the peer could know Hash-I=PRF(SKEYID,YI|YR|CKY-I|CKY-R|SA Offer|ID-I) Hash-R =PRF(SKEYID,YR|YI|CKY-R|CKY-I|SA Offer|ID-R) CSE 5349/7349

  50. Phase II • What traffic does SA cover ? • Initiator specifies which entries (selectors) in SPD are for this IPSec SA, sends off to responder • Keys and SA attributes communicated with the Phase I - IKE SA • Passes encrypted & authenticated CSE 5349/7349

More Related