Installation | HP Envy Photo 7855

1. Install HP Envy Photo 7855 HP Envy Photo 7855 is an All-in-One printer that prints using the HP Thermal Inkjet technology. One of the special features of this printer is automatic duplex printing. To know how to install Hp Envy Photo 7855 and initial hardware setup, refer to the quick steps given below. Unpack: Check for the essential accessories in the box. Once you take the HP Envy Photo 7855 printer out of the box, remove all the tapes, stickers, and other packing materials from the inside and outside of the printer. You can recycle the packing materials. Power cord connection: Take a power cord and connect it between the HP Envy Photo 7855 printer and a wall outlet. Power up the printer, set a language, country/region, and select the Yes option. Installing the ink cartridges: Lift-open the cartridge access door. Wait until the carriage moves to the center and stays idle. Take a new ink cartridge from the package and remove the plastic tape from it. Place the unpacked ink cartridge in the slot correct. Placing plain paper: Pull the input tray out from the printer. Take out the output tray. Check if there are any packing materials in the paper tray. If so, remove them completely. Move the paper-width guides in the outward direction, place some plain paper, If you have any difficulties please click the below read more button Read More: