1 / 8

Fouling prediction Determination of most economical exchangers maintenance

ROP- Programm designd for ACR by the Technical University of Vienna. Fouling prediction Determination of most economical exchangers maintenance Calculation of charges in monetary value caused by tube efficiency losses. Applicable for all industrial used tubular heat exchangers.

jaimin
Download Presentation

Fouling prediction Determination of most economical exchangers maintenance

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ROP-Programmdesignd for ACR by the Technical University of Vienna • Fouling prediction • Determination of most economical exchangers maintenance • Calculation of charges in monetary value caused by tube efficiency losses Applicable for all industrial used tubular heat exchangers AC Rädler Environment technique GmbH, www.ac-raedler.at lecture: Sigrun Rädler

  2. Fouling process is predicted immediately:Increased Temperature/EnergyGrowing of FoulingLoss of Capacityin days AC RädlerEnvironment technique GmbH, www.ac-raedler.at lecture: SigrunRädler

  3. Feature for operation cost:Company own figures are put (in the masque) and are computed regarding cost of - energy - stand still - capacity loss AC Rädler Environment technique GmbH, www.ac-raedler.at lecture: Sigrun Rädler

  4. Exchanger efficiency losses in Monetary ValueCleaning point Loss during operationCost ofmaintenance AC Rädler Environment technique GmbH, www.ac-raedler.at lecture: Sigrun Rädler

  5. Improved productivity save resources and cost1) Legend: Last slide indicates the source of following outcome • Efficient exchanger operation is the simplest way to reduce production costs • Chemical cleaning cause rough inner tube surface which lead to faster fouling, to earlier corrosion and tube replacement • Smooth inner tube surface prolong optimal exchanger operation • Regular cleaning diminish corrosion failure AC Rädler Environment technique GmbH, www.ac-raedler.at lecture: Sigrun Rädler

  6. Regaining of blocked tubes improve exchangers operation capacity – with RTC possible to regain • Regaining of fully exchangers efficiency contributes to energy saving, capacity improvement and at least to improve exchangers life cycle. • Optimal exchanger operation further contributes to: • less pump pressure • less repairs • less problems before or end of pipe equipment • reduction of emissions AC Rädler Environment technique GmbH, www.ac-raedler.at lecture: Sigrun Rädler

  7. Optimal maintained heat exchangers may avoid to much oversized exchanger design • Oversized exchangers capacity vary from 10 % to 300 % • 25 % of oversized exchanger design will increase investment cost up to 12 % • Parallel connected exchangers, which are optimal maintained: • Minimise efficiency loss • Minimise production loss (no stand still) • Reduce corrosion failure • Contribute to plant harmonization, • improve production quality • anddouble exchangers life cycle AC Rädler Environment technique GmbH, www.ac-raedler.at lecture: Sigrun Rädler

  8. Legend: • Book: published by PP Publico Publication, Germany “Heat Exchanger Fouling, Mitigation and Cleaning Technologies” by Prof. H. Müller-Steinhagen, Dr. H. U. Zettler, AC Rädler A-1220 Vienna, Leonard-Bernstein-Street 8/2/23.8  + 43(0) 676 374 65 09  + 43(0) 676 616 99 22  office@ac-raedler.at www.ac-raedler.at Environment techniqueLtd. AC Rädler Environment technique GmbH, www.ac-raedler.at lecture: Sigrun Rädler

More Related