1 / 18

DC Circuit Overview

DC Circuit Overview. Examination #2 Review March 1, 2010. ?. Review Today No problem session after class today Exam #2 on Wednesday There will be a class hour after the exam and we will start some new material. No quiz on Wednesday Don’t forget to bring in Lab Notebooks on Friday

jacksonl
Download Presentation

DC Circuit Overview

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DC Circuit Overview Examination #2 Review March 1, 2010 ?

  2. Review Today • No problem session after class today • Exam #2 on Wednesday • There will be a class hour after the exam and we will start some new material. • No quiz on Wednesday • Don’t forget to bring in Lab Notebooks on Friday • Next topic: This Week

  3. Things To Remember: • This chapter (20) does not exist by itself. • The understanding of POTENTIAL is critical to the chapter so make sure that you at least look at chapter 19 of you are unsure of the concept. • The exam structure: • 8 reasonably short conceptual problems, some from your lab sheets. (Total of 60 points) • 1 Problem on Kirchoff’s Laws (you knew that, right?) (20 points) • 1 Other problem. (20 points)

  4. What is a battery and what does it do?? • The battery has two TERMINALS that maintain a potential difference between them • That potential difference is usually referred to as the “voltage of the battery”. • Any two points in a circuit that are DIRECTLY connected to a battery will have the battery voltage across it. • The (+) terminal is defined as having the higher potential and the (–) terminal is often referred to as the lower potential and sometimes it is referred to as the ground or reference potential. • The symbol for the battery is shown above. • There are MANY types of batteries. 1.5 Volts 6 Volts

  5. Current Current is the flow of positive charge

  6. Current & Wires • The electrons are moving in the wire. • There MUST be an electric field in the wire. • The field is V/d. d is the length of the wire. V is very small in most circuits. • Current goes the opposite way that electrons go. This is rarely a problem. • Some wires make it hard to move charge. These are called Resistors. A simple example is the W wire that you played with. • For such materials, the relationship between the Voltage across the element and the current through it is given by Ohm’s Law: V=IR

  7. RESISTANCE (Ohms –W)

  8. Typical problems A wire has a resistance of 21.1 Ω. It is melted down, and from the same volume of metal a new wire is made that is four times longer than the original wire. What is the resistance of the new wire? The filament in an incandescent light bulb is made from tungsten. The light bulb is plugged into a 60 V outlet and draws a current of 1.04 A. If the radius of the tungsten wire is 0.0024 mm, how long must the wire be? Two wires are identical, except that one is aluminum and one is iron. The aluminum wire has a resistance of 0.19 Ω. What is the resistance of the iron wire?

  9. POWER to the people:

  10. A cigarette lighter in a car is a resistor that, when activated, is connected across the 12-V battery. Suppose that a lighter uses 27.1 W of power. (a) Find the resistance of the lighter.(b) Find the current that the battery delivers to the lighter.

  11. ADD RESISTORS

  12. A Hard One? The circuit in the Figure has been connected for a long time. What is the voltage across the capacitor?

  13. Determine the power supplied to the 7.0 Ω resistor in the circuit shown in the drawing. (R1 = 4.0 Ω, R2 = 7.0 Ω and V1 = 15 V.)

  14. Kirchoff’s Law #1 • The sum of all the currents entering a node of a circuit is equal to the sum of all the currents leaving the node. • Current Entering= - Current Leaving. • Sometimes stated: The sum of all the currents entering a node is equal to zero. • The sum of the voltage RISES in going around a current loop is equal to zero.

  15. Kirchoff’s Law #2 H L RISE DROP

  16. Kirchoff’s Law #2 I L H DROP RISE

  17. Example – The Battery Emf of Battery Loop: E –Ir – IR =0 Voltage Supplied = V-Ir

  18. Dr. Dubey will now do some problems

More Related