Top 2 Ways to Fix Endless Reboot Loop after Windows 10 Update http://www.pcerror-fix.com/methods-repair-windows-10-recovery-loop-error-without-reinstall
About the Issue This endless loop error appears when Windows try to repair a startup issue that doesn't exist. The Windows 10 reboot loop is intimidating, generally appears when you update your system to Windows 10 from Windows 8.1, 8 or 7. After the completion of upgrading process when you boot the computer, a screen appears with the ‘Preparing Automatic Repair’ message. After this your system will restarted automatically and executed Automatic Repair after every boot.
Causes of Reboot Loop and Crash Loop on Windows 10 Update According to a report, the third update of Windows 10 is the main cause of this Windows 10 endless crashing issue. After upgrading to KB3081424 of Windows 10 update which is actually a roll-up of bug fixes, system fails during the update process and display the message: “We couldn’t complete the updates, undoing the changes.” Due to failure of updating process system reboots and when user log back on Windows 10 update will try to install KB3081424 again. Windows 10 updates cannot be blocked KB3081424 and this leaves the system stuck in endless reboot loops.
Important Update Available: Microsoft has released an important updated to fix "reboot loop" issue. Download this Windows Update. Open Settings > Update & security > Windows Update, and choose “Check for updates”. You will see that an additional update will be downloaded and installed to your Windows 10 system to fix the endless reboot loop. Note: in order to prevent this reboot loop from occurring again, it is suggested to ensure that all the system drivers are error free and compatible with Windows 10. To do this task you can use a professional system driver repair tool. This app will scan, fix and update all the system drivers automatically.
Solutions to Fix Endless Reboot Loop during or after Windows 10 Update Try the below given methods to fix the boot loop during or after Windows 10 update on your Windows system , like Lenovo, Asus, Acer, Dell, HP, ThinkPad, Toshiba, IBM, Sony, Gateway, Samsung, IBM, etc.
Method 1: Get Rid of Damaged Registry Entry to Repair Restart Loop during Windows 10 Upgrade Step 1: Press Windows key + R to open run dialogue box and type “regedit” in it. Step 2: Registry editor Window will appear, in this window navigate to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList Step 3: Take the backup of your registry key to avoid any future issue.
Continue Step 4: Find the ProfileList IDs and delete any with ProfileImagePath found in it as it shouldn’t be there Step 5: After it close the registry editor window, restart and next time KB3081424 should install properly
Method 2: Use a Professional way to Fix Driver Issues and solve the Endless Reboot Loop after Windows 10 Update According to a report Windows 10 conflicts with AMD graphics. If your system is stuck in endless reboot loop after Windows 10 update finishes then there must be driver issues. Apply a professional tool to fix the graphics drivers. This is all-in-one solution which is a professional at checking and fixing driver issues. It able to repair the corrupt driver, install the best-matched driver and update to the latest driver if it is outdated.
The End /pages/Fix-PC-Error/523125764467185 u/0/b/110355697757249019670 /repairpcerror /alexwaston14/fix-pc-error channel/UCb-PIbnNxVe6S2xG2lNcq5w http://www.pcerror-fix.com/methods-repair-windows-10-recovery-loop-error-without-reinstall