1 / 47

Detailed Design Review

Detailed Design Review. Multidisciplinary Senior Design 1 Friday, February 15 th , 2013. P13051. P13051 – PIV Experiment for Flow Mapping in Lungs. Customers: Dr. Risa Robinson Dr. Steven Day Team Guide: Michael Antoniades – Chemical Engineering Team:

jabari
Download Presentation

Detailed Design Review

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Detailed Design Review Multidisciplinary Senior Design 1 Friday, February 15th, 2013 P13051

  2. P13051 – PIV Experiment for Flow Mapping in Lungs • Customers: • Dr. Risa Robinson • Dr. Steven Day • Team Guide: • Michael Antoniades – Chemical Engineering • Team: • Kristin Roberts – Project Manager, ME • Morgan DeLuca – ME • Brad Demarest – EE • Ryan Mark – ME • Jimmy Moore – CE • Jake Snider – ISE

  3. Agenda • Project Background • Customer Needs & Engineering Specifications • Component Design & Feasibility • Pressure Measurement & Control System • Pump System • Lung Tank & Reservoir • Camera/Laser Positioning System • Preliminary Test Plans • Risk Assessment

  4. Project Background • The Army Medical Research Lab needs to validate their CFD models for healthy and diseased lungs • RIT will perform particle image velocimetry (PIV) on lung models to validate the CFD. • The senior design team will design and develop the lung models and testing apparatus.

  5. What is PIV? • Used for flow visualization and velocity measurements • Fluid is seeded with tiny tracer particles • The particles are illuminated using a laser sheet, and a camera takes pictures of the particles. • Fluid velocity profiles can be obtained by analyzing particle movement from frame to frame.

  6. Key Customer Needs • Accommodate various image locations • Simulate inhalation and exhalation • Monitor flow rate and pressure • Control flow at outlets to mimic boundary conditions of CFD model • Accommodate imaging with no distortion • Create LabVIEW Program and procedure to run experiment • Can easily switch between models

  7. Pressure Control Subsystem Comprised of: • T-hose splitter • Dual flow needle valve • Amplified voltage pressure transducer • Powered breadboard

  8. Needle Valve • High resolution, therefore minor adjustments to flow can be made (5 turns) • Dual flow capability (allows inhale and exhale simulation) • Low profile for organization purposes • Low cost (20$)

  9. T-Hose Splitter • Reasons for using a T-hose splitter: • Separate static pressure from dynamic flow • Allow pressure readings to be taken parallel to flow increasing accuracy • Organize flow path from model to valve system

  10. Amplified Pressure Sensor • Accuracy (can measure static pressures +/- 1% with proper calibration) • Cost (65$ per sensor) • Compact design (no extensive cables or adaptation, plug into breadboard) • Easy to calibrate and characterize to increase accuracy

  11. Breadboard Implementation • Keeps voltage sensors organized and setup compact • Allows user to adjust voltage getting applied to sensors easily • Flow from pressure control to DAQ device will be smooth

  12. Pressure Control Path Fluid will leave outlet With steady state conditions fluid will separate due to splitter and apply static pressure on sensor Flow will be adjusted with needle valve based on logger pro readout compared to desired conditions Back to pump

  13. Calibration Technique Fluke 718 series • Can use to apply very accurate known pressure • Output voltage can then be read and adjusted to create new curves accurately matching sensor performance • Device is on loan from ME Department

  14. Flow Characteristics • Viscosity determined through index matching, (550 SSU, 109 cP, 0.109 Pa-s) • Much higher than water (1 cP) • Flow tested by Army is from 2-10 L/min • Using Reynolds number matching, 6-32 GPM • Pressure loss through system ranges from 20 psi to 50 psi • Calculated using Poiseuille flow

  15. Positive Displacement vs. Centrifugal Conclusion: PD pumps provided better flow control, regardless of pressure and handle high viscosities. Graph Credit: pumpschool.com

  16. PD Pump Selection Image Credit: Wikipedia; Info Credit: pumpscout.com

  17. 3 GPM 35 GPM 6 GPM 19 GPM 33 GPM Siewert, 1.6-16 GPM, $2,079 Siewert, 2.3-23 GPM, $2,189 Siewert, 3.2-32 GPM, $2,319 Emerick, 3.3-33 GPM, $2,754

  18. Siewert Emerick • Max flow rate: 33 GPM • Min flow rate: 3.3 GPM • Max Pressure: 200 psi • Speed Ratio: N/A • Price: $2,745 • Shipping not included • Lead time: 3-4 weeks • Max flow rate: 32 GPM • Min flow rate: 3.2 GPM • Max Pressure: 100 psi • Speed Ratio: 10:1 • Price: $2,319 • Shipping included • Installation Assistance • Lead time: 5-6 weeks

  19. Inhalation Pipe Schematic

  20. Lung Tank Design • The project team has decided to go with acrylic siding for the tank, as it is easy to machine and is readily available in the needed sizes. • The tank will be 24” x 16’’ x 16’’, which will hold slightly less than 27 gallons worth of liquid.

  21. Lung Tank Design • The case will be made watertight using silicone gel, and then made more structurally sound using L-brackets along the side. • 8 holes will be drilled along the bottom of the side panels for the multi-tube connectors • A single hole on the top of the case will allow liquid to be pumped in to the model.

  22. Tank Wall Deformation Analysis • ANSYS Workbench was used to analyze wall deflection due to hydrostatic pressure (P=ρgh). • Original choice of 1/8” thick acrylic resulted in 1.868” outward deflection. • Needed to find appropriate wall thickness that would not affect PIV results 1/8” 5/16”

  23. Tank Wall Deformation Analysis • Treated tank wall as a simply supported beam • Able to calculate deflection and slope of deflection • Calculate angle between laser and perpendicular

  24. Tank Wall Deformation Analysis • Used Snell’s Law to calculate the angle of the laser after it enters the tank (θ2). • We can then calculate the error associated with refraction using the distance the lung is from the wall. θ2 Distance to model Error )(distance)

  25. Tank Wall Deformation Analysis

  26. Tank Wall Deformation Analysis For a 16”x24” acrylic panel, 7/16” thick

  27. Reservoir Design • Similar design to Lung Tank • 1/8” thick acrylic will be fine since tank is not used for PIV – only 0.17” deflection. • 12”x12”x12” box • Holes cut for connection to pump system

  28. Omega Multi-tube Connectors • Can handle 10 tubes per connector. Will allow easy connection/disconnect when we switch out models. • Allows for thru-wall connection to simplify the tank and tube interface.

  29. Lung Holder • Used to hold lung in tank • Put rubber between holder and lung model to ensure a tight and secure fit • Can rapid prototype in clear Watershed XC 11122 for ~$300

  30. Lung Holder Drawing

  31. Labview – Data Acquisition • NI-USB-6225, Screw Terminated • 80 Analog Input Ports • Compatible with Labview • $1749 • This will output to the Labview program which will collect the pressure data and display it to the user.

  32. Labview Code • Not fully completed • Need all components before testing and construction can occur.

  33. Positioning System • Need: Ability to take PIV pictures of all branches and bifurcations • XYZ Stages alone are not the answer • Used for low travel, high resolution • Very expensive for more than one • Optics rods and clamps also too expensive & precise • Make it ourselves – 80/20

  34. Design • Essentially a square arch that translates • L-Handle brakes to keep it in position • Strong frame – no vibration • Drop-in T-studs allow for camera movement • When combined with a rotation allows for all angles

  35. Result • Contacted Bob Proscher at Ralph W. Earl Co. • Developed a kit including all requested machining • Quote: $243.75 • Mount an optical stage (5 – 10 mm) • $600 - $1,000

  36. Index Matching Fluid • Refractive index (RI) of fluid must match that of the model. • Model will be made using RedEyeVeroclear • n = 1.47 • Fluid used will be made from glycerin. • 85% Glycerin, 15% Water • n = 1.45 • While RI may not be matched exactly, the difference is negligible.

  37. Complete Test Setup Positioning System Reservoir Pump System Lung Tank

  38. Budgetary Overview

  39. Tanks and Containment

  40. Camera Positioning

  41. Pump System

  42. Common Header

  43. Pressure Control and Measurement

  44. Risk Assessment

  45. Questions?

More Related