1 / 3

OptiEdge ETH2x10GX

OptiEdge ETH2x10GX . Dual Port 10Gbp/s ( SFP ) MPLS Layer-2/3 Module.

ivi
Download Presentation

OptiEdge ETH2x10GX

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. OptiEdge ETH2x10GX Dual Port 10Gbp/s ( SFP ) MPLS Layer-2/3 Module Stand alone 19 inch by 1 RU high Dual Port 10Gig Base-X ( SFP ) Layer 2/3, MPLS* LER/LSR, QoS L2-L4, POE ( optional ) 40Gbps Switching Fabric, 128Mb Packet Buffer, 512K MAC address, 4096 VID’s, Q-in-Q Double Tagging AC and or DC with optional power supply Unit may be used in conjunction with the OptiCore 400 and or 800* as an optional module. Hardware Layer2/3 routing packet communications, of up to 40Gbp/s .The OptiEdge-ETH2x10GX supports Static and Dynamic routing, RIPv2, OSPFv2 and BGPv4. The deployment of TLS ( Transparent LAN Services ) is possible through the construction of L2 VPN over MPLS. The deployment of Layer -3 VPN over MPLS is possible using BGP RFC-2547. The OptiEdge-ETH2x10GX has 8 queues per port, with algorithms that allow prioritization of data flow permitting specific packets to have priority, ( set weights for each row, set minimum rates of routing, or a combination of these techniques). The classification can be made by using the IEEE 802.1 p standards. In band granularity of 64Kbit in definition of CIR (Committed Information Rate) and RIP (Peak Information Rate), can be applied to traffic to and from the ports, or a particular flow of packages through the filters. The construction of 4096 Virtual LANs are possible on the OptiEdge ETH2x10GX as defined in the IEEE 802.1Q standards while still offering functionality of double tagging (Q-in-Q), allowing for the creation of TLS services. It is possible to set VLANs via protocol, MAC address and IP subnet - with the possibility of overlapping ports in VLAN, and configuration using dynamic protocol GVRP. Spanning Tree protocol including RSTP that have lesser recovery times, and MSTP for better use of resources and greater scalability similar to that of EAPS, specifically for protection of sub-50ms in Ethernet rings. With features of link aggregation is possible to group physical ports forming logic gates, automatic load balancing and recovery times with typical of sub -200 ms. Making it possible to construct topologies with speed in the restoration of failures of Metro Ethernet applications. Wire Speed Wire Speed Switch Layer 2 L2-L4 Switch Layer 2 LER/LSR QoS N/A MPLS 128 MB PoE 2 x 10G (XFP) Packet Buffer 40 Gbit/s Ports 64 MB 256 MB Switch Fabric (internal) 512k* Flash 32k* SDRAM 16k* MAC address table 240k* L3 hosts (IPv4) 240k* L3 hosts (IPv6) 1k L3 Routes (IPv4) 4k L3 Routes (IPv6) 1k L2 Multicast groups 4k L3 Multicast groups (IPv4) 4k 4k L3 Multicast groups (IPv6) Filters Meters Counters Where to Buy Call 954-474-8485 For information. OSP Networks USA 12320 NW 18 Street Plantation FL 33323 954-474-8485 Main General Information www.ospnetworks.com 10Gbp/s 10GBMPLS VRRP Redundancy 10Gbp/s 10Gbp/s 10Gbp/s 10Gbp/s Note: *OptiCore 800 to be released in Q1 2008

  2. OptiEdge ETH2x10GX Dual Port 10Gbp/s ( SFP ) MPLS Layer-2/3 Module VPWS - L2 VPN over MPLS (Draft Martini) * Label Distribution Protocol (LDP) * Auto-negotiation Speed, duplex mode, flow control e MDI/MDIX MPLS Mapping between 802.1p and EXP Field of MPLS * Flow Control Backpressure in half duplex; PAUSE (IEEE 802.3x) in full duplex RFC 2547 - L3 VPN over MPLS* Protection Classic Spanning Tree (IEEE 802.1D) Command Line Interface (CLI) via SSH, Telnet and Console Rapid Spanning Tree (IEEE 802.1w) Web Server com SSLv3 Management SNMP v1/v2c/v3 Per-VLAN Rapid Spanning Tree RMON grupos 1, 2, 3 and 9 Multiple Spanning Tree (IEEE 802.1s) Configuration of ACLs with multiple comparisons and actions BPDU Guard, EAPSv1, Link flap detection, Loopback detection Network diagnosing tools for (telnet, traceroute and Ping) 8 queues per port QoS (marking, classification and prioritization) Cabling diagnostics tools TCI tagging (IEEE 802.1p) Up to 2 firmwares flash, with upgrade via TFTP or HTTP/HTTPS IP Precedence/TOS or DSCP/TOS Up to 4 Flash settings with upload or download via TFTP or HTTP / HTTPS Source/Destination IP ou MAC Link OAM (EFM – IEEE 802.3ah) TCP ports ou UDP ports Link Layer Discovery Protocol (LLDP – IEEE 802.1AB) Static or dynamic IP address (DHCP / BOOTP) Generic L2-L7 filter match DHCP relay with option 82 Rate Shapping (Ingress e Egress), com granularidade de 64 Kbit/s por porta e por fluxo na definição de CIR e PIR IEEE 802.1x Port authentication with guest vlan, restricted vlan and vlan assignment Weighted Round Robin, Weighted Fair Queuing, Strict priority or combination of these techniques and algorithms for scheduling queues SNMP filters for controlling access to Web, Telnet and SSH Dual WRED configurations, one for in-profile and one for out-of-profile MAC addresses configuration limit per port and VLAN Security Maximum rate of Broadcast, Multicast and DLF controlled by port Additional Layer 2 Functionality Local and Remote Syslog Head of Line Blocking protection Authentication, authorization and accounting with RADIUS and TACACS +. e-mail notification (SMTP) Up to 9Kb Jumbo Frame support Mechanisms for protecting against attacks from Denial of Service (DoS) IGMP (v1/v2/v3). Snooping Query functionality may be used SNTP Ageing L2 global ou por VLAN Tagging for up to 4096 simultaneous VIDs (IEEE 802.1Q) Layer 2 Protocol Tunneling MAC-based, IP-Subnet based, Protocol-based (IEEE 802.1v) Traffic Monitor para portas e/ou fluxos de pacotes Q-in-Q double tagging Static Routing Additional Layer 3 Functionality Private VLAN RIP v1/v2, OSPF v2 e BGP v4 * Dynamic VLAN (GVRP) VLAN Redundancy via VRRP * 32 logical groups, with up to 8 ports in each active group PIM (SM, DM e SD) * Where to Buy Call 954-474-8485 For information. OSP Networks USA 12320 NW 18 Street Plantation FL 33323 954-474-8485 Main General Information www.ospnetworks.com Static or dynamic way settings LACP (IEEE 802.3ad) Proxy ARP Configuration criterion for load balancing . Link Aggregation d d d

  3. OptiEdge ETH2x10GX IEEE 802.3/802.3u/802.3z 802.3ab 802.3x 802.3ac 802.1D 802.1Q 802.1w 802.1s 802.3ad 802.1p 802.1x 802.3ah 802.1AB 802.1v 10Base-T, 100Base-TX, 1000Base-SX 1000Base-T Flow Control Extension for VLAN Tagging Bridging Virtual LAN Rapid Spanning Tree Multiple Spanning Tree Link Aggregation Priority Support Port Security Ethernet First Mile LLDP MAC-based IP-Subnet, Protocol based Dual Port 10Gbp/s ( SFP ) MPLS Layer-2/3 Module IETF RFC1812 RFC1157 RFC2819/2021/1757 RFC2865/2138/2058 RFC2030 RFC3619 RFC3164 RFC1058/1723 RFC1583/2178 RFC1112/2236/3376 RFC2474/2475 IPv4 SNMP Protocol RMON I e RMON II RADIUS Authentication/Authorization Simple Network Time Protocol (SNTP) v4 EAPSv1 Syslog Protocol RIP/RIPv2 OSPFv2 IGMPv1/IGMPv2/IGMPv3 DiffService MIBs Bridge MIB Entity MIB Interface MIB MIB-II ETHERLIKE-MIB Extended Bridge MIB RMON-MIB RS-232-MIB SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TCP-MIB UDP-MIB RFC1493 RFC2037 RFC1229/1573/2233/2863 RFC1213 RFC1398/1623/1643/2665 RFC2674 (Q-Bridge-MIB, P-Bridge-MIB) RFC1757 Where to Buy Call 954-474-8485 For information. OSP Networks USA 12320 NW 18 Street Plantation FL 33323 954-474-8485 Main General Information www.ospnetworks.com

More Related