1 / 30

Hydraulic Kit (pump and tank)

Hydraulic Kit (pump and tank). Pictures from prototype. Hydraulic Kit (pump and tank). Main Characteristics. Size and shape = 5 HP unit. 100 litre tank for all models. Separate power supply. Anti Freeze protection. Q x 1000 x  t. V =.  x d x Cw x n.

ivana
Download Presentation

Hydraulic Kit (pump and tank)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Hydraulic Kit (pump and tank) Pictures from prototype

  2. Hydraulic Kit (pump and tank) Main Characteristics Size and shape = 5 HP unit 100 litre tank for all models Separate power supply Anti Freeze protection

  3. Qx1000 x  t V =  xdxCw x n 100 litre tank for all models ? The water (glycol) volume should be so big that the time necessary to pull down the water temperature equal to the thermostat difference, is half the time of the anti-recycling time Q = Cooling Capacity at the lowest capacity step (W) t = Anti-recycling time of the compressor (s)  = Specific mass of the fluid (kg/m³) d = Thermostat difference (step length) (°C) Cw = Specific heat of the fluid (J/kg°C) (4186 for water) n = Nr of compressors that can work independently

  4. 7 6 Thermostat Difference 5 100 litre tank for all models ? Water Out (°C) More Water Less Water Time sec.) The water (glycol) volume should be so big that the time necessary to pull down the water temperature equal to the thermostat difference, is half the time of the anti-recycling time

  5. 7 6 Thermostat Difference 5 Anti Recycling Timer 100 litre tank for all models ? Water Out (°C) Water Volume should be selected to cope with the anti-recycling timer of the compressor Compressor On Compressor On Time sec.) 240 The water (glycol) volume should be so big that the time necessary to pull down the water temperature equal to the thermostat difference, is half the time of the anti-recycling time

  6. Only 1 compressor: Example: EUWA20HZ Nominal Cooling Capacity: 42 kW Load: 21 kW Capacity Step: 0 - 100% Thermostat Difference: 1,5 °C Anti Recycling Timer: 240’’  Only half the capacity of the chiller is required… The water (glycol) volume should be so big that the time necessary to pull down the water temperature equal to the thermostat difference, is half the time of the anti-recycling time

  7. For 1 compressor: During On - mode: System will cool down with a capacity of 21 kW During Off - mode: System will heat up with a capacity of - 21 kW The water (glycol) volume should be so big that the time necessary to pull down the water temperature equal to the thermostat difference, is half the time of the anti-recycling time

  8. Thermostat Difference Anti Recycling Timer For 1 compressor: Water Out (°C) Cooling 21 kW Heat Up: 21 kW Time sec.) Compressor Off 240 The water (glycol) volume should be so big that the time necessary to pull down the water temperature equal to the thermostat difference, is half the time of the anti-recycling time

  9. m =  * V cwater = 4186 J/kg°C V = 21000 W * 120 s 4186 J/kg°C* 1,5 °C For 1 compressor: Out of the formula Q = m * c * T Q = m / (t) * c * T m = (Q *  t) / (c * T) V = 400 l The water (glycol) volume should be so big that the time necessary to pull down the water temperature equal to the thermostat difference, is half the time of the anti-recycling time

  10. For 2 compressors: Example: EUWA20HZ Nominal Cooling Capacity: 42 kW Load: 21 kW Capacity Steps: 0 - 50 - 100% Thermostat Difference: 1,5 °C Anti Recycling Timer: 240’’ The water (glycol) volume should be so big that the time necessary to pull down the water temperature equal to the thermostat difference, is half the time of the anti-recycling time

  11. For 2 compressors: Compressor 1 can operate continuously Compressor 2 is continuously switched off Capacity = Load Constant Temperature is obtained  no buffer tank needed The water (glycol) volume should be so big that the time necessary to pull down the water temperature equal to the thermostat difference, is half the time of the anti-recycling time

  12. Thermostat Difference Anti Recycling Timer For 2 compressors: Water Out (°C) Time sec.) Compressor Off 240 The water (glycol) volume should be so big that the time necessary to pull down the water temperature equal to the thermostat difference, is half the time of the anti-recycling time

  13. For 2 compressors: Example: EUWA20HZ Nominal Cooling Capacity: 42 kW Load: 10,5 kW Capacity Steps: 0 - 50 - 100% Thermostat Difference: 1,5 °C Anti Recycling Timer: 240’’ The water (glycol) volume should be so big that the time necessary to pull down the water temperature equal to the thermostat difference, is half the time of the anti-recycling time

  14. On Off 21 kW 10,5 kW Cooling Down 1 2 2 2 0 kW - 10,5 kW Heating Up 1 1 1 21 kW 10,5 kW Cooling Down 2 0 kW - 10,5 kW Heating Up For 2 compressors: Auto lead - lag switching CAPACITY LOAD The water (glycol) volume should be so big that the time necessary to pull down the water temperature equal to the thermostat difference, is half the time of the anti-recycling time

  15. Compressor 1 On Compressor 2 On Thermostat Difference Anti Recycling Timer For 2 compressors: Water Out (°C) Cooling 10,5 kW Heat Up: 10,5 kW Compressor Off Time sec.) 240 The water (glycol) volume should be so big that the time necessary to pull down the water temperature equal to the thermostat difference, is half the time of the anti-recycling time

  16. For 2 compressors: V = 10500 W * 60 s 4186 J/kg°C* 1,5 °C V = 100 l The water (glycol) volume should be so big that the time necessary to pull down the water temperature equal to the thermostat difference, is half the time of the anti-recycling time

  17. 10 + 10 + 10 The max. water volume is determined by the capacity of a 10 Hp compressor

  18. Hydraulic Module Model Names • EHMC 10 AV1 ( 5  10 HP ) • EHMC 15 AV1 (15 HP ) • EHMC 30 AV1 ( 20  30 HP)

  19. Outlook 1284 mm 635 mm 724 mm Pictures from prototype

  20. Outlook Water Outlet Modification to service panels : Water Inlet Other Cover ! Pictures from prototype

  21. Outlook STANDARD MODEL 10 m H2O Pictures from prototype

  22. Outlook Air Purge Pressure port (On the same side as the regulating valve) Pictures from prototype

  23. Outlook Pressure regulating Shut-off valve Safety Valve Pressure Gauge Pressure port Pictures from prototype

  24. Outlook Water INLET and Shut-Off valve For Freeze-up Protection Drain Plug Pictures from prototype

  25. Outlook Main Switch Manual - O - Auto Pictures from prototype

  26. Outlook Thermal Protector Pump Relay Field Wiring Standard : 6 Core Pictures from prototype

  27. Compatibility FOR 15 MODELS ! • EHMC 10 AV1 • EUWA 5 / 8 /10 H (Z) W1 / T1 • EUWY 5 / 8 10 H W1 EUWA 5 / 8 /10 H (Z) W1 / T1 EUWA 5 / 8 /10 H (Z) W1 / T1 EUWA 5 / 8 /10 H (Z) W1 / T1 EUWY 5 / 8 10 H W1 • EHMC 15 AV1 FOR 5 MODELS ! • EUWA 15 H (Z) W1 / T1 • EUWY 15 H W1 • EHMC 30 AV1 FOR 15 MODELS ! • EUWA 20 / 25 / 30 H (Z) W1 / T1 • EUWY 20 / 25 / 30 H W1

  28. Installation Alongside the chiller or remotely A drain pan enables an indoor installation under all conditions Water inlet is at the same height as the chiller outlet Power supply possible via the chiller Easy hydraulic balancing via pressure regulating valve

  29. Options • 010 • Freeze-Up Protection ( 200 Watt Heater ) = Standard • 070 • High Static Pump (30 m H2O)

  30. Thank You for Your Attention

More Related