1 / 23

TOBB ET Ü ELE46/ELE563 Com munications Networks Lecture 01 May 6, 2014

TOBB ET Ü ELE46/ELE563 Com munications Networks Lecture 01 May 6, 2014. Fall 20 11 Tuesday 10: 30 – 1 2:2 0 ( 310 ) Thursday 15: 30 – 1 7:2 0 ( 372 ) İsrafil Bahçeci Office : 168 ibahcec i@etu.edu.tr. Data Link Layer. Functions of DLL. Frame transmission Reliable: Error free

israel
Download Presentation

TOBB ET Ü ELE46/ELE563 Com munications Networks Lecture 01 May 6, 2014

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. TOBB ETÜELE46/ELE563Communications NetworksLecture 01May 6, 2014 Fall 2011 Tuesday 10:30 – 12:20 (310) Thursday15:30 – 17:20 (372) İsrafil Bahçeci Office: 168 ibahceci@etu.edu.tr

  2. Data Link Layer

  3. Functions of DLL • Frame transmission • Reliable: Error free • Efficient: Transmission Rate vs. Channel condition • What to do? • Error correction/detection • Channel impairements

  4. DLL Design Issues • Service interface to network layer • Dealing with transmission errors • Flow control • Frame management: Network packets encapsulated

  5. Data Path Unacknowledged connectionless service -> Reliable channel ->Ethernet Acknowledged connectionless service -> Unreliable channel -> Wi-Fi Acknowledged connection-oriented service

  6. ACK/NACK issue • DLL ACK/NACK is an optimization, not requirements • Higher layers may take care of errors • PHY medium determines this optimization • Fiber, ethernet • Wireless • Connection-oriented service: reliable streaming • Appropriate for unreliable, long channels (satellite, long-distance telephone circuit, etc..) • Establish a connection before data exchange • Numbered frames • Each frames received exactly once, all in order • 3 phases • Connection establishment, initialize counters • Frame transmission • Connection release

  7. Framing • Bit stream from PHY layer may contain errors • DLL splits bit streams in to discrete frames • Checksum: CRC = cyclic redundancy check bits • Receiver calculates the checksum bits and compares it with the one contained in the frame • Bad frames detection

  8. Frame generation • Must alleviate the frame reception (e.g., sync) at the receiver side • Byte-count • Number of bytes in the header • Errors in this info is catastrpohic • Flag bytes with byte stuffing • Frame start at certain slots indicate by a known flag byte (start and end with FLAGs) • If FLAG exists in paylod, insert ESC charcater; ESC is removed before forwarding to network layer • PPP: point-to-point protocol • Flag bits with bit stuffing • Physical layer coding violation

  9. Byte FLAGing

  10. Bit FLAGing • Bit level flagging • Bit stuffing • Ex. HDLC – high level data link control • Frame begins with 0x7E : 01111110 • Bit sutffing: a consecutive 5 1s stuffed with 0

  11. Frame Length • Data based frame length • ~12.5% with bit stuffing • Ethernet • Preamble: all frames start with a known bit pattern • 72-bits for 802.11

  12. Error Control • ACK/NACK • ACK: correct reception • NACK: error!, retransmit • Complete ACK/frame loss • Timers: Time to wait for ACK/NACK • Timer cancellation if ACK arrives before • Multiple transmission of frames: Frame numbering • Overall goal: Each frame is only passed only once to the network layer

  13. Flow Control • How to control frame rate so that receiver can accept transmissions • Sender: fast processors, receiver: slow processor • HD Video to a smartphone with small computing power! • Feedback-based flow control • Rx to Tx: send more/less data • Rate-based flow control • Tx-built in flow control without feedback • Usually feed-back based in DLL: Rx side determines the transmission of additional data until it processes the previously received ones

  14. Error Detection/Correction • Fiber, cable: small error • Wireless links: larger errors • Add redundancy for correction • FER: forward error correction • Enough redundancy for detection • Depends on channel reliability • Fiber: error detection • Wireless: error correction + detection • Error types • Single-bit errors, few-bit errors • Burst errors • Erasure channel: easier to correct than flip-errors • FEC/ED can be used in PHY,DLL and network layers as well

  15. FEC: error correction codes • Hamming • Binary convolutional • Reed-Solomon • Low-density parity check codes

  16. FEC • Frame length: m bits • Redundancy: r bits • Linear block code: r bits from m information bits via linear combination (e.g., in mod-2 for binary codes) of information block • Systematic code: m bits are sent directly • Code rate = m/(m+r)

  17. Hamming distance • Distance between two sequences • Binary: seq_d = seq1 XOR seq2 • Number of 1s in seq_d • Hamming distance of d -> d single bit errors

  18. Hamming Code • Linear block code • Error syndrome

  19. Convolutional Code

  20. Decoding • Soft-decision • Hard-decision

  21. Cyclic codes • A subset of linear block codes • Non-binary cyclic codes • BCH codes • Reed-Solomon codes

  22. Error Detection Codes • Linear systematic block codes • Parity • Checksums • Cyclic redundancy checks (CRCs)

More Related