1 / 27

Math in Motion :: The Bicycle

isra
Download Presentation

Math in Motion :: The Bicycle

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. Math in Motion :: The Bicycle Jason Achilich GED 613 Math Notebook

    2. Let’s Start with the Frame There are many examples of math in bicycle frames. The most basic is the size, Size is measured from the center of the cranks to the top of the seat tube.

    3. What about the reach of the bike? Now that we see how the height of the bike is measured. What about the reach? The top tube is another important number to fitting bike frames. This number is proportional to the seat tube, as one gets larger, the other measurement grows as well.

    5. Angles in a Frame Yes there are angles in bicycle frames. Both the seat tube (ST) and the head tube (HT) are angles. These angles affect how the rider is positioned on the bike and how the bicycle handles.

    6. Math in Bike Wheels Sometimes different wheel sizes are used for performance, other times to go faster, sometimes to fit a smaller person on a bike. Generally a very short person will have smaller wheels on their bike to make positioning easier.

    7. How does wheel size vary with height?

    8. A larger mountain bike wheel

    9. Spokes in the wheel Wheels for different styles of cycling sometimes have different numbers of spokes. The more spokes that a wheel has the stronger it is.

    10. Can a Wheel not be Round? A wheel will not be oval shaped, but it is possible for a wheel to not be perfectly round. When viewed closely, there can be high and low spots. These hops and dips are measured in millimeters, and though these small variations do not affect the ride, they can lead to imbalances in the system.

    11. Penny Farthings Penny what? Penny Farthing, a term based upon two British coins of the time, a Penny, and a Farthing which is a quarter Penny. The two coins resemble the bicycle. These were the first bicycles, dating back to the 1860’s. At this point there were no gears to make a rider go faster or slower. James Starley found that with a direct drive bicycle, a larger wheel could travel further each rotation because of the larger circumference of the wheel.

    12. Examples of Penny Farthings

    13. Making the Wheels Turn Unlike the Penny Farthings, modern bicycles have an assortment of gear ratios. This range of ratios allows the rider to work more or less, depending on how fast they would like to travel.

    14. Using the Gear Ratios Track racers use ratios to their advantage. Sprinters need quick acceleration, by the use of a lower gear, to get a jump on the competitor. Putting their work into a lower gear allows the whole system to increase in speed quickly.

    15. Pedaling the bike The length of the crank arm also is affected by math. A longer crank are will give the rider more leverage to push the gear, but the circle their feet must travel is larger, causing a slower rotational time. While some riders will use a shorter crank length, giving them less leverage, but a quicker cadence. The eternal question, which is more efficient?

    16. Numbers where bikes are ridden. Track racers compete on an elliptical course called a velodrome. These velodromes can range in length from 250 meter to 400 meters. A 250 meter long track can have a banking of 50 degrees in the two turns. A 400 meter track has banking of 30 degrees Longer turn equals less need for banking.

    17. Riders using the banking Track racers will use the banking to their advantage. To gain an advantage a racer will get above their competitor on the banking. Once it is time to sprint, they will use the slope of banking to help them accelerate. Here a rider gets up on the banking to accelerate out of the turn.

    18. Traveling around the Velodrome In track racing much of the winning and losing depends on your line around the track. The lines on the track represent “lanes.” Riders can’t ride below the black line near the bottom, so riders will hug it, enabling them to ride a shorter distance than the rider trying to “come around them.”

    19. How many Kilometers in an Hour? The hour record on the track is the purest form of cycling ability. It is the race against the clock. Competitors attempting to break the hour record will know the average Km/Hr that they will need to ride. The rider shown here averaged 49.431 Km/Hr in 1972 to set the new standard.

    20. Meters, what’s that in miles? Cycling roots are very European, so most all events are measured in metric units. Many cycling fans that are not using the metric system are familiar with the kilometers to miles conversion. It is common for a cycling fan to know some key conversions. One kilometer is about a six tenth of a mile and one mile is about 1.6 kilometers. Which allows a rough estimate of a large European road race of 200km, to about 125 miles.

    21. Percent Grades Since cyclists are powering themselves, they worry about the steepness of the hills they are riding. This steepness is generally represented in percent grades. To find the grade, divide the rise, by the run, and multiple it all by 100. A mellow grade is below 5 percent. 22 percent is the steepest grades found in Vermont

    22. Route Planning This spring I am participating in the New England Fleche. A Fleche is a ride where there is an ending point, but the starting point can vary; teams build their own route to the finish around specific rules regarding distance and time. The main rule requires teams to ride at least 380km in a 24 hour period. What will the average speed be for this criteria? My team has put together a spread sheet adding up our mileage and times. Each segment leg is added to our total, so we know how far we will traveled in 24 hours. Our time is also added up by segments to form the whole. Thus ensuring we follow the rules.

    23. Our Trip to Westfield, MA

    24. Rider position on the Bicycle A rider can benefit from proper positioning on a bicycle. A right angle, is also the strongest. In this photo you can see all the different angles in play. It is important to notice the angles on the torso. She is using structure not muscle to hold herself up.

    25. Handlebar Measurements Comfort on a bike can even be affected by your handlebar width. Too wide and you are using strength to hold yourself up. The right width you are able to use a 90 degree angle to help support your weight.

    26. Closing In my searches for information concerning math in cycling, many websites devoted to the topic were uncovered. The information presented here barely scratches the surface of the topic, but what is presented are some of my favorites that I use and think about most often. Math is everywhere in cycling, looking at the sport it is staggering how in-depth you could take many of these examples!

    27. Onward:A final thought on Pi. The meaning of Pi now has meaning to me, as I almost daily use it to determine the circumference of a wheel while installing a cyclo-computer. I am looking forward to exploring more cycling and math relationships down the road.

More Related