1 / 33

Operational Experience with

Operational Experience with. MPLS. Dave Siegel Vice President IP Engineering. Table of Contents. Overview of hub architecture History of Network architecture Early challenges and how MPLS solved them Challenges with MPLS today VPN Deployment Architecture Capabilities (RFC2547, l2VPN)

ishana
Download Presentation

Operational Experience with

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Operational Experience with MPLS Dave Siegel Vice President IP Engineering

  2. Table of Contents • Overview of hub architecture • History of Network architecture • Early challenges and how MPLS solved them • Challenges with MPLS today • VPN Deployment • Architecture • Capabilities (RFC2547, l2VPN) • Provisioning aspects • Customer experiences • IPv6 deployment w/ MPLS • How the network would behave without MPLS

  3. WR1 WR2 OC-48/OC-192 OC-12/OC-48 OC-3/OC-12 CR1 CR2 AR1 AR2 PR1 RR1 Modems ADMs Ethernet Switches GBLX

  4. Early Challenges • Hop Count • Network diameter ranged from 14-18 hops • GRE tunnels were not supported on GSR images • Traffic Engineering • Large numbers of DS3’s and OC-3c’s in metro regions proved difficult to manage with IS-IS metrics • Future VPN Product

  5. MPLS Solutions • Hop Count • MPLS had no-decrement-ttl option • MPLS tunnels were in implementation phase for GSR images • Traffic Engineering • MPLS provided for much more efficient utilization of metro bandwidth

  6. MPLS Solutions • Hop Count • Established Cross-country tunnels to mask main hops normally encountered in the core • Traffic Engineering • Established regional meshes of LSPs between devices

  7. Multi-vendor networks • Theory: having multiple suppliers gives you best-of-breed, plus contingency plans if you have major problems with your primary supplier • Reality: Once a vendor is entrenched in your network, replacing them completely is simply too capital intensive • Reality: you have worst-of-breed, because you must wait for both of your vendors to have a compatible implementation of a feature before deployment.

  8. Multi-vendor networks • Early interoperability issues (circa 1999-2000) • Penultimate hop (NULL label vs. strip) • No-decrement-ttl issues (it’s a one-hop network!) • Current Issues • Fast Re-route • Secondary LSP • Auto-bw

  9. Current Stats • MPLS core LSP mesh • 9900 tunnels make up the core mesh (100 core routers) • 1200 tunnels between PR’s that make up the IP-VPN Express route Product • 11,100 tunnels total in the core • Complexity requires automated management tools

  10. MPLSrobot • Bot components • High-speed snmp poller • Tunnel resize script w/ tons of knobs • Graphing capability • Path database • Configuration push scripts • Day-to-day challenges involve conditioning of collected data • Run daily but configs pushed weekly

  11. WANDL

  12. Getting Started • Remove roadblocks • Look for features of your network design that increase complexity or introduce roadblocks to implementing MPLS • Multiple AS’s • Multiple levels/areas in your IGP • Lack TE support in your IGP

  13. Getting Started • Choose reasonable RSVP bandwidth • Set bandwidth values on new tunnels to 0 Mbps, and then measure over 24 hours. • Set tunnel bandwidth to observed peak + some fudge factor (e.g. 95th %tile peak + 10%) • Do tunnel implementations slowly over time…don’t introduce too much churn in the network • Tune link utilization with RSVP bandwidth values during transition

  14. Follow our Roadmap! • Q4 1998 MPLS lab trials begin • Q1 1999 MPLS limited production trial begins (regional mesh + ttl masking hack) • Q2 1999 national LSP mesh between all CR’s complete • Q2 2000 global LSP mesh complete • Q2 2001 RFC 2547 IP VPN’s and L2-VPN’s with DiffServ (2 CoS’s)

  15. Operational issues uncovered • Through 1999, MPLS was blamed for a variety of outages and/or performance degradation issues, including • High latency • Loss • Reachability • Workarounds included bouncing LSP’s • Most of the time, CEF bugs were to blame!

  16. Operational issues uncovered • Except when WRED was to blame

  17. Operational issues uncovered • Training, Training, Training • Cannot be underestimated • Experience, Experience, Experience • GX had 2 full years of experience with MPLS operationally before adding MPLS-based VPN’s to the network

  18. IP-VPN (ExpressRoute) architecture • Objective is to provide as much isolation from the Internet as possible • Separate ASN (not AS3549) • Private Routers (PR’s) not reachable from outside gblx.net (non-advertised address space) • Full mesh of LSP’s between all PR’s • Full iBGP mesh among all PR’s

  19. IP-VPN (ExpressRoute) architecture • Secondary Objective is to provide as high a class of service as possible. • LSP’s have higher priority than LSP’s for Internet Service so they always get the best (lowest latency) routes. • ToS Bits are painted into a Business Class (vs. Best Effort for Internet Service) which is re-written into the EXP field

  20. IP-VPN Customers • Connected: Even mix of RFC 2547 and l2-vpn • Sales Funnel: Majority (60%) want L3-VPN • Sales Funnel: good mix between carrier and enterprise • Largest customer is RFC 2547 with approximately 50 circuits • Market interest is still gaining momentum for this product set (ISP provided IP-VPN)

  21. IP-VPN Provisioning pros/cons • L2-VPN’s are the easiest to engineer for the customer, but adds/deletes/moves require updating configs on every PR where the customer is connected. • L3-VPN’s require less configuration on the ISP side, but are preferred less due to the high level of CPE engineering coordination required. • L3-VPN’s were designed as a complete out-source of a customer’s routing, but in reality customers use this service in conjunction with another VPN

  22. IPv6 deployment using MPLS • GX has 3 routers located at native IPv6 exchange points • Sure, you could use GRE tunnels to interconnect them over IPv4, but MPLS gives you: • Per tunnel utilization statistics • Path info • Scalability (as the product grows, you can add devices as an overlay network without impacting stability on existing platforms)

  23. How the network would behave without MPLS • WANDL simulations show that there would be no congestion in the network based on IGP TE with IS-IS, so MPLS is not needed today for TE. • Bandwidth reservations for MPLS-based VPNs would not be as meaningful with large amounts of native IP traffic on backbone trunks.

  24. Questions

  25. THANK YOU Additional questions may be sent to dsiegel@gblx.net

More Related