1 / 39

POWER EQUIPMENT INSTRUCTOR: ROBERT A. MCLAUGHLIN ZAILI THEO ZHAO

POWER EQUIPMENT INSTRUCTOR: ROBERT A. MCLAUGHLIN ZAILI THEO ZHAO. HIGH PRESSURE FITTINGS. Learning Objectives. A boiler and pressure vessel . A level 1 boiler and a critical pressure boiler. The various pressure fittings used on boilers. The types of safety valves on boilers.

Download Presentation

POWER EQUIPMENT INSTRUCTOR: ROBERT A. MCLAUGHLIN ZAILI THEO ZHAO

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. POWER EQUIPMENT INSTRUCTOR: ROBERT A. MCLAUGHLIN ZAILI THEO ZHAO HIGH PRESSURE FITTINGS

  2. Learning Objectives • A boiler and pressure vessel. • A level 1 boiler and a critical pressure boiler. • The various pressure fittings used on boilers. • The types of safety valves on boilers. • The components of a boiler gauge glass. • The proper procedures for removing a boilers gauge glass from service, disassembly of the gauge, inspection and replacement and rebuild of a typical gauge glass.

  3. Boiler • A steam boiler is a closed pressure vessel in which water is heated to generate saturated steam. • The water is heated by the gasses of combustion. • A pressure vessel that produces hot water heated by the gasses of combustion is also a boiler.

  4. Boiler - classification • Boilers can be divided into two pressure related categories: • Low pressure – boilers operating at 15 psi and below. • High pressure – boilers operating above 15 psi.

  5. Boilers can also be categorized into Level ratings. • A Level 1 boiler is • When the temperature and pressure of a boiler equals 1500 or more. • All of the components of a level one boiler designed with a safety factor of 5 and are tested and given serial numbers.

  6. WHAT IS THE FACTOR OF SAFETY? • Ultimate strength divided by allowable working stress or bursting pressure divided by safe working pressure. • It can vary between four and seven depending on age, type of construction, and condition. • Use five for most calculations

  7. Critical pressure • Many boilers operate at pressures 1000 to 3000 psi. • Some operate at critical pressure – 3206 psi and 705.08oF • Critical pressure is the pressure at which steam and water at the same density. • All critical pressure boilers must have separate a pump to create circulation.

  8. External fittings and connections • Drains • All steam and water sections must have these. • The superheater will have drains. • The drums and headers will have drains.

  9. External fittings and connections • Vent • high pressure globe valve at high point in the boiler • used when filling and emptying the boiler.

  10. External fittings and connections • Sample connections • used for taking boiler water samples. • Drains, vents, and sampling connections will all have high pressure rated globe valves attached to the connection.

  11. External fittings and connections • Feed stop and check valves • to manually regulate the flow of water to the drum.

  12. External fittings and connections • Steam stop valves • located at the superheater and desuperheater outlets. • Used to cut the boiler in or out of the main steam line.

  13. External fittings and connections • Safety valve • two types (huddling chamber and nozzle reaction type). • They are not relief valves. • Question • What is the difference between the safety and relief valves?

  14. External fittings and connections • Soot blower • Fixed and retractable

  15. Internal fittings

  16. External fittings and connections • Water gage glass – attached directly to the drum, they allow the operator to see the water level in the drum. • All boilers operating over 400 psi are required to have two independent means of determining water level. • One will be a gauge glass attached directly to the steam drum; one will be a remote water level indicator.

  17. External fittings and connections • Temperature and pressure gauges • Superheated steam flow indicators

  18. the operator control the safe operation of the boilers.

  19. Gauge Glass • Two independent means of indication • These can consist of two gauge glasses attached to the drum, or a single gauge glass, and a remote water level indicator. • A gauge is located so that: • the lowest visible part of the glass is 2” above the lowest permissible drum water level • the upper most visible part of the glass is located 2” below the upper most

  20. Gauge Glass • Boilers operating at pressures below 250 psi can be fitted with tubular type gauge glasses • Above 250psi, flat type gauge glasses are required. • Isolation valves are required on each leg of the gauge glass

  21. Gauge Glass • There are high pressure glass type indicators that can be used instead of flat gauge glasses, • for example, bicolor gauge glasses. • Figure gauge glasses work on the principle of light refraction

  22. Gauge Glass • Every gauge glass will have valves to isolate the gauge from the drum pressure for maintenance and emergency situations. • The isolation valves are usually of the quick closing type, capable of being closed with ¼ turn of the handles. • The handles will be connected by chain pulls so that an operator can pull on the chain and close both valves at the same time from a remote location. • The bottom isolation valve will always be fitted with a ball check device to prevent hot water from flowing through a broken gauge glass.

  23. Gauge Glass • Each gauge glass assemble will be fitted with a blowdown connection to: • Insure that the connections between the drum and gauge do not become clogged. • To help the operator tell the level in the glass. • If you are in doubt of the level in the glass, blow the glass down (open the gauge drain valve). • If you blow a glass down, and you see the water level go up through the glass, then the drum level is high. • If no level appears, then the level is high.

  24. Gauge Glass • Leaks above the actual water level will indicate higher than normal levels. • Leaks below the actual level will indicate lower than normal levels.

  25. Gauge Glass • To blow a glass down for normal maintenance: • Disconnect the pull chains • Close the top valve and open the drain valve (blowdown valve). Let it drain for a few seconds. • Open the top isolation valve and close the bottom isolation valve. Leave the drain open for a few more seconds. • Close the drain valve. • Open the bottom isolation valve and reattach the chains.

  26. Flat type of Gauge glass construction • BODY • FLAT GUAGE GLASS • MICA SHEET • ASBESTOS GASKETS • ASBESTOS CUSHIONS • COVERPLATES • STUDS • NUTS 

  27. Gauge Glasses and Try Cocks • Both the water column and gauge glass must blowdown daily • Prevent sludge accumulations from blocking lines • Observe the level when it is blown. • When the valve is opened, the watershould drop out of the glass rapidly. • When the valve is closed, it should return rapidly to its previous level. • If the glass water drains slowly • This is an indication of clogging up. • The situation must be corrected as quickly as possible, even if the coiler has to be shut down.

  28. There is one adjustment on the muddling chamber type safety valve • Adjusting ring • Question • Who can adjust the boiler safety setting pressure?

  29. There are two adjustments • Adjusting ring • Nozzle ring • Question • How to increase the blowdown pressure?

  30. The wires for remote releasing safety valve

  31. Gate valve rise stem

  32. Globe valve

  33. Swing check valve

  34. Ball valve

  35. Butterfly valve

  36. Marine boiler examplewhat are these fittings? • 1 - Gauge Glass or Water Column • 2 - Main Steam, Safety, Auxilary Steam Valves • 3 - Pressure Gauge • 4 - Surface Blow • 5 - Skin Valve (through ship's side) • 6 - Bottom Blow • 7 - Hydrokineter (to increase water circulation) • 8 – Furnaces • 9 - Fire-Tube bundles • 10 - Main Feed Valve • 11 - Auxiliary Feed Valve • 12 - Deep Blue sea

  37. THANK YOU

More Related