1 / 9

Contact Points and Light Bulbs

Contact Points and Light Bulbs. Physics First Unit 1 Electricity. Contact Points. All electrical points have contact points Contact points- allow electrical current to flow Inside the device there is a pathway (without breaks) so current can flow. Contact Points.

iren
Download Presentation

Contact Points and Light Bulbs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Contact Points and Light Bulbs Physics First Unit 1 Electricity

  2. Contact Points • All electrical points have contact points • Contact points- allow electrical current to flow • Inside the device there is a pathway (without breaks) so current can flow

  3. Contact Points • All devices must have at least 2 contact points (some have more) • One point allows current to flow in while the other allows current to flow out • Contact points must be separated by some insulator

  4. Anatomy of a Light Bulb • 3. filament wire- current passes through and creates heat which turns to light • 4 and 5- contact wires that connect to filament • 9 and 11- outside contact points insulated by 10 • 8- wire connected to inside contacts

  5. Anatomy of a Light Bulb • 1. Glass bulb- protector • 2. Inside gas- does not allow the filament to burn out • 6. Support wires- no electrical purpose • 7. Stem- glass mount

  6. Symbols • Resistor- (light bulb, motor, buzzer) device that a current can cross

  7. Symbols • Wire • Battery

  8. Symbols • When a switch is opened or closed we must show it in our circuit diagrams

More Related