tsw3070 arb waveform generation n.
Download
Skip this Video
Loading SlideShow in 5 Seconds..
TSW3070 ARB WAVEFORM GENERATION PowerPoint Presentation
Download Presentation
TSW3070 ARB WAVEFORM GENERATION

Loading in 2 Seconds...

  share
play fullscreen
1 / 13
iola-herring

TSW3070 ARB WAVEFORM GENERATION - PowerPoint PPT Presentation

0 Views
Download Presentation
TSW3070 ARB WAVEFORM GENERATION
An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. TSW3070 ARB WAVEFORM GENERATION 10/05/2017 Neeraj Gill

  2. HARDWARE REQUIRED • TSW3070EVM • TSW1400EVM • 6V power supply for TSW3070EVM • 5V power supply for TSW1400EVM • Mini USB cable for TSW1400EVM • USB A to B cable for TSW3070EVM • SMA cable for applying clock signal • SMA to BNC for connecting TSW3070EVM output to Oscope

  3. Hardware setup USB A to B FOR TSW3070EVM 5V for TSW1400EVM 6V for TSW3070EVM Output to Oscope Clock signal 500MHz 6dBm Mini usb for TSW1400EVM

  4. DAC5682Z GUI LOAD • If board is connected correctly, status will indicate “Connected to DAC5682Z EVM!” • Click “Register Config”

  5. DAC5682Z GUI Load Cont… Step 2 Step 1 • Step 1 – click “Load Regs” under CDCM7005 tab and select “CDCM7005_4x.txt” • Step 2 – click “Load Regs” under DAC5682Z tab and select “DAC5682Z_4x.txt”

  6. Setup DAC in HSDC Pro • Launch HSDC Pro, select Serial Number (DAC Capture Card) • Click OK

  7. Setup DAC in HSDC Pro • Select the “DAC5682Z” from the FW dropdown • Click OK to load the FW

  8. Setup DAC in HSDC Pro • Go back to the DAC GUI and click the DLL reset radio button twice • The DLL light should turn from red to green

  9. Setup DAC in HSDC Pro • Set “Data Rate” to “125M” and “DAC Option” to “2’s Complement”

  10. Setup DAC in HSDC Pro Step 1 Step 2 • Step 1 – Click “Load External Pattern File” • Step 2 – Select “DAC5682z customer pattern file.csv” and click OK

  11. Setup DAC in HSDC Pro • Click Send to start waveform playback

  12. DAC5682Z GUI Load Cont… Go Back to DAC GUI and toggle software sync radio button

  13. Output