1 / 5

Steps to Troubleshoot Logic Board Issues on Macbook

A MacBook doesn’t have a Mother Board, it has a Logic Board.Its functioning is similar to the Mother Board and it provides central connection to every part of Macbook. Macbook has an inbuilt diagnostic suit called Apple hardware test and it allows you to troubleshoot a lot of issues.If you have any other macbook technical problem then call Macbook repair Centre Number 1800-431-354<br>

insleyevelynj32
Download Presentation

Steps to Troubleshoot Logic Board Issues on Macbook

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. View info : View info : - - https://apple.repairscentre.com.au/ https://apple.repairscentre.com.au/

  2. A MacBook doesn’t have a Mother Board, it has a Logic Board. Its functioning is similar to the Mother Board and it provides central connection to every part of Macbook. So if your system goes through some hardware malfunctioning, then you need to diagnose the central system as well. Macbook has an inbuilt diagnostic suit called Apple hardware test and it allows you to troubleshoot a lot of issues. This utility was released during the year 2000 and since the years, it has only developed. But using this tool requires a lot of skill and knowledge and if you are not able to use it properly, then you don’t need to worry. macbook repair center has given a list of steps to troubleshoot issues using the logic board.

  3. Steps for troubleshooting are: 1- Insert Apple hardware disk in the drive. This utility is readily available and would be found on the second desk long with installation disks. But it could also be found on some sites such as Github. 2- Restart your system. You have to restart the system to initialize the diagnostic progress. To make sure that Macbook loads up along the utility press and hold the key D. 3- Once setup is initiated, select the preferred language and click on next.

  4. 4- When you will encounter interface of diagnostic tools, press the key T to run tests. This test will run for 10 minutes. 5- The last scan was a quick scan, now this scan will be a deep scan. To run the scan click on the checkbox next to “perform extended testing”, and then click on test button. This test will run for few minutes depending upon the damage. This tool will tell you all about the malfunctions but not troubleshoot if there are software issues. With this, you can have your malfunctions fixed in no time. But if you still have doubts or are unable to troubleshoot problems, then we recommend you to contact information. only this, this tool will also look for Macbook helpdesk to get more

  5. Original Source :- https://bit.ly/2KvuuWR

More Related