1 / 12

Delays and Performance: King County METRO RapidRide C & D Lines

Delays and Performance: King County METRO RapidRide C & D Lines. University of Washington URBDP 422 Geospatial Analysis, Winter 2014 Debmalya Sinha, Austin Bell, Riley Smith, Andrew Brick. Overview. Primary task: identify delays Where When Magnitude Secondary tasks:

inga
Download Presentation

Delays and Performance: King County METRO RapidRide C & D Lines

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Delays and Performance: King County METRO RapidRide C & D Lines University of Washington URBDP 422 Geospatial Analysis, Winter 2014 Debmalya Sinha, Austin Bell, Riley Smith, Andrew Brick

  2. Overview • Primary task: identify delays • Where • When • Magnitude • Secondary tasks: • Identify priorities for remediation • Recommend delay reduction strategies • Future research: • Relationship between delays and socioeconomic status

  3. Data • Onboard System (OBS) for October 2013 (245,826 entries) • Records real-time information of bus activity • No weekend data was included in data file • General Transit Feed Specification (GTFS) • Provides scheduled arrival times for all routes • Shapefiles • C & D Line stop locations (point) • C & D Line routes, manually segmented (line) • Field Data • Physical attributes of stops and route segments

  4. Methods Data Preparation • Raw OBS and GTFS data imported into R • All times converted to seconds after midnight where required • Trips categorized by start time: • 0000 – 0600: pre-peak • 0600 – 0900: am-peak • 0900 – 1500: midday • 1500 – 1800: pm-peak • 1800 – 0000: post-peak

  5. Methods Computations • Delays • scheduled arrival time – actual arrival time (in seconds after midnight) • Stop performance • “Marginal” doors open time: number of seconds it takes for each passenger to board or alight (over the amount of time it takes only one passenger to do so) • Averaged for each stop • Segment performance • Seconds per foot: number of seconds between sequential stops divided by the segment length, converted to speed • Averaged for each segment

  6. Methods Unplanned Stops • Raw OBS data imported into GIS • X,Y data extracted from GPS entries (generated point shapefile) • Data screen: retained only those stops which did not occur at bus stops (retained only entries where STOP_ID = 0) • Computed kernel density with DWELL_SEC as value field • Reclassified output raster from 1 to 9, with 1 representing shortest stops / lowest number of stops

  7. Results Delays • Worst Delays • Southbound in West Seattle • Southbound and Northbound Downtown

  8. Results Relative Stop Performance • Marginal on/off time consistently higher in D than C • Correlated with passengers embarking and alighting • Off board payment generally unused

  9. Results Relative Segment Performance • Worst performance: • Northern and Southern endpoints of Rapid Ride • Downtown segments • Alaska Junction

  10. Results Stops & Segments • Averaged data reveals differences by time of dayand by ridership

  11. Conclusions and Questions • No correlation between physical attributes of stops and performance • Ridership explains only 26% of doors open time • More complex phenomena (traffic flows, signals) account for most variation • Why does C Southbound accumulate large delays in West Seattle?

  12. Questions University of Washington URBDP 422 Geospatial Analysis, Winter 2014 Debmalya Sinha, Austin Bell, Riley Smith, Andrew Brick

More Related