Create Presentation
Download Presentation

Download Presentation
## 1.25 cm 0.8 cm 2.25 cm 0.1 cm 12.5 cm

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -

**A 10-m long steel wire (cross – section 1cm2. Young's**modulus 2 x 1011 N/m2) is subjected to a load of 25.000 N . How much will the wire stretch under the load? Select the correct answer. • 1.25 cm • 0.8 cm • 2.25 cm • 0.1 cm • 12.5 cm**A uniform beam having a mass of 50 kg and a length of 2.7 m**is held in place at its lower end by a pin. Its upper end leans against a vertical frictionless wall as shown in the figure. What is the magnitude of the force the pin exerts on the beam? Select the correct answer. • 0.57 kN • 0.66 kN • 0.39 kN • 0.84 kN • 0.93 kN**How large a pressure increase (in ATM ) must be applied to**water if it is to be compressed in volume by 3%? The bulk modulus of water is 2 x 109 N/m2 and 1ATM = 105 N/m2 Select the correct answer. • 600 ATM • 570 ATM • 640 ATM • 60 ATM • 6.000 ATM**How large a force is necessary to stretch a 1 - mm diameter**copper wire (Y = 11 x 1010 N/m2) by 2%? Select the correct answer. • 1.728 N • 2.028 N • 1.328 N • 173 N • 17.280 N**A horizontal meter stick supported at the 50 - cm mark, has**a mass of 0.20kg hanging from it at the 10 - cm mark and a 0.20 kg mass hanging from it at the 80 - cm mark. Determine the position on the meter stick at which one would hang a third mass of 0.50 kg to keep the meter stick balanced. Select the correct answer. • 54 cm • 49 cm • 64 cm • 69 cm • 74 cm