1 / 42

Denial-of-Service (DoS) Attacks Network Systems Security

Denial-of-Service (DoS) Attacks Network Systems Security. Mort Anvari. A Security Problem in Network. An adversary that has access to a network can insert new messages, modify current messages, or replay old messages in the network

indira-cote
Download Presentation

Denial-of-Service (DoS) Attacks Network Systems Security

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Denial-of-Service (DoS) Attacks Network Systems Security Mort Anvari

  2. A Security Problem in Network • An adversary that has access to a network can insert new messages, modify current messages, or replay old messages in the network • These inserted, modified, and replayed messages can go undetected until they cause severe damage to network • The physical location of the adversary in network may never be determined • Example: denial-of-service attacks

  3. Denial-of-Service (DoS) Attacks • Aimed to deny normal service provided by the target computer • Communication-stopping attacks • ARP spoofing attack • Resource-exhausting attacks • Smurf attack • SYN attack

  4. Ping Protocol • Allow any computer to check whether any other computer in the Internet is up • Any computer x can send a “ping” message to any computer y which replies by sending back a “pong” message (thus x knows y is up) • In ping message: src = x and dst = y • In pong message: src = y and dst = x ping(x, y) x y pong(y, x)

  5. Broadcast Ping Protocol • If in ping message dst = “all”, a copy of ping is broadcast to every computer • Each computer replies by sending back a pong, and x is flooded with pong messages • In ping message: src = x and dst = “all” • In pong message: src = y and dst = x y´ pong(y´,x) ping(x,all) x y pong(y, x)

  6. Smurf Attack • An adversary pretends to be x and broadcasts a ping message where src = x and dst = “all” • Thus, x is flooded with pong messages that it has not requested: denial-of-service attack at x a ping(x,all) y´ pong(y´,x) x y pong(y, x)

  7. R3 R2 R1 Countering Smurf Attack • Make each router check the src of each received message and discard the message if the src is suspicious src=x shouldn’t come to me a y´ ping(x, all) x y

  8. R3 R2 R1 Clever Smurf Attack • An adversary inserts a ping(x, all) message between routers R2 and R3 • R3 thinks the message was forwarded by R2 and so accepts the message a y´ ping(x, all) x y

  9. Countering Clever Smurf Attack • When R3 receives a message, R3 needs to determine whether message was indeed sent by R2, or was modified or replayed by an adversary between R3 and R2 • If use IPSec, will need to set up SA’s between each pair of adjacent routers: too expensive • Our solution:use hop integrityprotocol between each pair of adjacent routers

  10. Hop Integrity • Let p, q be routers connected to same subnetwork • Detection of Message Modification: • when q receives a message m supposedly from p, q can check that m was not modified after sent • Detection of Message Replay: • when q receives a message m supposedly from p, q can check that m was not a replay of an old message

  11. Adversary vs. Routers • The adversary can perform three types of actions to disrupt communication between two routers • Message loss • Message modification • Message replay • The routers are assumed to be secure and cannot be compromised by the adversary • The routers will execute hop integrity protocols that can detect and defeat the adversary actions

  12. Hop Integrity Protocol • Each pair of adjacent routers need to share a secret S, which is updated periodically by the two routers using a secret exchange protocol • To each IP message sent between two adjacent routers, add a sequence number sq, and an integrity check d d := MD(S | hd | sq | txt) d 16 bytes if MD5; 20 bytes if SHA-1 MD MD5 or SHA-1 sq 4 bytes hd txt IP message hd sq d txt

  13. Architecture of Hop Integrity Protocols router p router q Applications s Application Transport Transport secret qe pe exchange secrets secrets layer Network Network integrity check qw or qs pw or ps layer Subnetwork Subnetwork .

  14. Component of Hop Integrity Protocols • Three protocols between each pair of adjacent routers • secret exchange protocol • weak integrity protocol • strong integrity protocol

  15. How to Exchange Secret • Each router p has a secret S that it uses for computing the digest of every msg sent to an adjacent router q • Both p and q need to know S • What if p sends secret update message to q periodically? • Problem due to message loss • What if p sends secret update message to q periodically and q sends an ack to p? • Problem due to bundling of secret exchange layer and integrity check layer

  16. Secret Exchange Protocol • q updates secret S used by p by sending a secret update message to p every T hours • When p receives secret update message from q, p updates secret and sends an ack to q • If q does not receive ack from p for t seconds, q retransmits the secret update message

  17. Secret Exchange Protocol S[0] q p S S[1] S[0] = S[1] = S S[0] old S[1] new BpS[0], S[1] if S = S[0]  S = S[1] then S :=S[1] BqS if S[1] = S then S[0] :=S[1] S[0] = S[1] = S T hours S[0] old S[1] new BpS[0], S[1] if S = S[0]  S = S[1] then S :=S[1] BqS if S[1] = S then S[0] :=S[1] S[0] = S[1] = S

  18. Recovery in Secret Exchange Protocol S[0] q p S S[1] S[0] = S[1] = S S[0] old S[1] new BpS[0], S[1] t seconds S[0] = S  S[1] BpS[0], S[1] if S = S[0] S = S[1] then S :=S[1] t seconds BqS S[1] = S  S[0] BpS[0], S[1] if S = S[0] S = S[1] then S :=S[1] BqS if S[1] = S then S[0] :=S[1] S[0] = S[1] = S

  19. Weak Integrity Protocol • To detect insertion and modification • Each sent msg from p to q is as follows (hd | d | txt) where p computes d as d = MD(S | hd | txt) • On receiving a msg, q checks if d = MD(S[0] | hd | txt)  d = MD(S[1] | hd | txt) then q forwards msg else q discards msg

  20. Weak Integrity Protocol S[0] q p S S[1] (hd | d | txt) . .

  21. Strong Integrity • To detect replay, successive sequence numbers are attached to all sent msgs from p to q • Problem with reset • If p is reset, unbounded number of fresh messages are discarded by q • If q is reset, it can accept unbounded number of replayed messages • Two solutions to overcome reset • Soft sequence numbers • Hard sequence numbers

  22. Soft Sequence Numbers • Successive sequence numbers are attached to all sent msgs from p to q: (hd | sq | txt) • q maintains two variables exp sequence number of next msg c #msgs received • On receiving a msg, q checks if (exp  sq)  (c = random value cmax) then q forwards msg else q discards msg fi; q updates exp, c, cmax

  23. Soft Sequence Numbers exp q p sq c cmax sq (hd | sq | txt) sq+1 . .

  24. Strong Integrity ProtocolUsing Soft Sequence Numbers • Each sent msg from p to q is as follows (hd | sq | d | txt) where p computes d as d = MD(S | hd | sq | txt) • On receiving a msg, q checks if (d = MD(S[0] | hd | sq | txt)  d = MD(S[1] | hd | sq | txt) )  (exp  sq  c = random value cmax) then q forwards msg else q discards msg fi; q updates exp, c, cmax

  25. Hard Sequence Numbers • To overcome reset, use two operations SAVE and FETCH • When SAVE is executed, the last sequence number will be stored in persistent memory • When FETCH is executed, the last stored sequence number will be loaded from persistent memory into memory

  26. Strong Integrity ProtocolUsing Hard Sequence Numbers • Each sent msg from p to q is as follows (hd | sq | d | txt) where p computes d as d = MD(S | hd | sq | txt) • On receiving a msg, q checks if (d = MD(S[0] | hd | sq | txt)  d = MD(S[1] | hd | sq | txt) )  (exp  sq) then q forwards msg else q discards msg fi; q updates exp • p and q executes SAVE periodically • When waking up from a reset, p (or q) executes FETCH to fetch last stored seq#, executes SAVE to store next seq#, and continues after SAVE finishes

  27. Other Applications of Hop Integrity • Mobile IP • Secure multicast • Security of routing protocols

  28. Mobile IP • A mobile computer c can visit a foreign network F other than its home network H • Msgs destined for c will be received by its home agent (HA) and forwarded to its foreign agent (FA) m m home agent (HA) c Internet m F H foreign agent (FA)

  29. Problem with Mobile IP • Mobile computer c can send a msg thru FA • However, this msg may be filtered out by next router q because its source address is “strange” ? m q home agent (HA) c Internet m F H foreign agent (FA)

  30. Mobile IP with Hop Integrity • With integrity check d added to msg m, q can check that m was indeed forwarded by FA • Thus, q ignores strange source of msg m and forwards m toward its ultimate destination m d m d q home agent (HA) c Internet m d F H foreign agent (FA)

  31. Multicast • Multicast msgs are forwarded through a spanning tree from root to every multicast destination • If a destination receives a multicast msg, then each destination receives a copy of same msg with high probability

  32. Multicast • Multicast msgs are forwarded through a spanning tree from root to every multicast destination • If a destination receives a multicast msg, then each destination receives a copy of same msg with high probability

  33. Multicast • Multicast msgs are forwarded through a spanning tree from root to every multicast destination • If a destination receives a multicast msg, then each destination receives a copy of same msg with high probability

  34. Multicast • Multicast msgs are forwarded through a spanning tree from root to every multicast destination • If a destination receives a multicast msg, then each destination receives a copy of same msg with high probability

  35. Security Problem with Multicast • If adversary inserts or modifies a multicast msg between two routers in middle of tree, then only a small fraction of multicast destinations receive the inserted or modified msg

  36. Multicast with Hop Integrity • With hop integrity, an inserted or modified multicast message will be detected and discarded at its first hop in the spanning tree

  37. Routing Information Protocol (RIP) • Every 30 seconds, RIP process in router R’ sends its routing table in a response msg to RIP process in each adjacent R • R updates its routing table when it receives a response msg from any adjacent R’ • Security problem R R RIP RIP UDP IP IP

  38. RIP with Hop Integrity • With hop integrity, the response msgs are protected against message modification, insertion, and replay R R RIP RIP UDP Secret Update Secret Update IP IP Integrity Check Integrity Check

  39. Security of Routing Protocols • Hop integrity can also provide uniform protection (against message modification, insertion, and replay) for other routing protocols • OSPF protocols (Hello, Exchange, Flood) • RSVP • Better than custom security mechanisms that have been proposed for some protocols

  40. Implementation of Hop Integrity • Implementation of hop integrity protocols in Linux kernel • Add integrity check digest and soft sequence number to IP options in IP header • Compatible with legacy routers • Flexibility of deployment

  41. Related Works • Ingress filtering [RFC2827]: • Completes hop integrity • Secure routing [Che97, MB96, SMG97]: • Not needed if hop integrity is installed • Traceback [BLT01, SWK+01, SPS+01]: • Cannot prevent denial-of-service attacks, but can detect some of them • IPsec [KA98a]: • Has goals other than dealing with denial-of-service attacks

  42. Next Class • Security in transport layer • SSL and TLS • Application of SSL/TLS in Web security

More Related