1 / 19

Signals and Systems Fall 2003 Lecture #11 9 October 2003

Signals and Systems Fall 2003 Lecture #11 9 October 2003. 1. DTFT Properties and Examples 2. Duality in FS & FT 3. Magnitude/Phase of Transforms and Frequency Responses. Convolution Property Example. ratio of polynomials in.

idra
Download Presentation

Signals and Systems Fall 2003 Lecture #11 9 October 2003

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Signals and Systems Fall 2003 Lecture #11 9 October 2003 1. DTFT Properties and Examples 2. Duality in FS & FT 3. Magnitude/Phase of Transforms and Frequency Responses

  2. Convolution Property Example ratio of polynomials in A, B – determined by partial fraction expansion

  3. DT LTI System Described by LCCDE’s From time-shifting property: • — Rational function of e-jω, use PFE to get h[n]

  4. Example: First-order recursive system with the condition of initial rest ⇔causal

  5. DTFT Multiplication Property Periodic Convolution Derivation:

  6. Calculating Periodic Convolutions Suppose we integrate from –π to π: where otherwise

  7. Example:

  8. Duality in Fourier Analysis • Fourier Transform is highly symmetric CTFT: Both time and frequency are continuous and in general aperiodic Same except for these differences Suppose f() and g() are two functions related by Then Letт = t and r = w: Letт = -w and r = t:

  9. Example of CTFT duality • Square pulse in either time or frequency domain

  10. DTFS Discrete & periodic in time periodic & discrete in frequency Duality in DTFS Suppose are two functions related by Then Let m = n and r = -k: Let r = n and m = k:

  11. Duality between CTFS and DTFT CTFS Periodic in time Discrete in frequency DTFT Discrete in time Periodic in frequency

  12. CTFS-DTFT Duality Suppose is a CT signal and a DT sequence related by Then (periodic with period 2π)

  13. Magnitude and Phase of FT, and Parseval Relation CT: Parseval Relation: Energy density in ω DT: Parseval Relation:

  14. Effects of Phase • Not on signal energy distribution as a function of frequency • Can have dramatic effect on signal shape/character — Constructive/Destructive interference • Is that important? — Depends on the signal and the context

  15. Demo: 1) Effect of phase on Fourier Series • 2) Effect of phase on image processing

  16. Log-Magnitude and Phase or and Cascading: Easy to add

  17. Plotting Log-Magnitude and Phase a) For real-valued signals and systems Plot for ω≥ 0, often with a logarithmic scale for frequency in CT b) In DT, need only plot for 0 ≤ ω ≤ π (with linear scale) c) For historical reasons, log-magnitude is usually plotted in units of decibels (dB): output power 1 bel 10 decibels input power power magnitude • So… 20 dB or 2 bels: • = 10 amplitude gain • = 100 power gain

  18. A Typical Bode plot for a second-order CT system • 20 log|H(jω)| and ∠H(jω) vs. log ω 40 dB/decade Changes by -π

  19. A typical plot of the magnitude and phase of a second- order DT frequency response • 20log|H(ejω)| and ∠H(ejω) vs. ω • For real signals, • 0 to π is enough

More Related