1 / 28

Field Data Normalisation for Soil Temperature and Moisture Content

This chapter provides an overview of the normalisation process for field data, including approaches such as average temperature and moisture content, time-step normalisation, and rate constant optimisation. The availability of data for normalisation and the assessment of study design and results are also discussed.

hwhitaker
Download Presentation

Field Data Normalisation for Soil Temperature and Moisture Content

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 9Normalisation of Field Half-lives Ian HardyBattelle AgriFood Ltd.,Ongar,UK

  2. Overview • Overview / Basic Processes • Availability of data for soil temperature and moisture content • Approaches to normalisation • Average temperature and moisture content • Time-step normalisation • Rate constant optimisation • Conclusions

  3. Overview • Why do we want to normalise field data ? • Degradation is investigated under more realistic use conditions for the product • Enables use in risk assessments – e.g. FOCUS groundwater models • Large amounts of useful information are generated during the field studies which are not fully utilised in evaluations

  4. Assessment of Study Design and Results • A preliminary check of the field study should be made to assess the suitability for its use in normalisation procedures: • Assess the significance of dissipation processes such as photodegradation and volatilisation. If they are unimportant, or can be properly addressed during the evaluation, then the use of the data in normalisation procedures is possible • The soil should be well characterised at different depths • The sampling depth and analytical method should allow for the bulk of the applied material to be evaluated • Daily meteorological data should be available (rainfall, air temperatures etc.) • Cropping and pesticide use history

  5. Basic Processes • Normalisation techniques should be consistent with the process implementation in the subsequent model used for risk assessment • For temperature: Standard FOCUS Q10 (2.2) or Arrhenius approaches can be used • For moisture: Walker B-factor (0.7) approach typically used • Can normalise to any reference conditionse.g. 20oC/pF2 for EU or 25oC/75% pF2.5 for US

  6. Data Availability • What data should we use for normalisation ? • Field half-lives are normalised to reference conditions reflecting the major influence factors on field dissipation – soil temperature and soil moisture • The normalisation is conducted using daily measured or simulated values for soil temperature and moisture • A number of algorithms are available for calculating soil temperatures from min/max air temperatures • Soil moisture can be readily estimated using the FOCUS groundwater models

  7. Soil Temperature Estimation

  8. Approaches to Normalisation • Three approaches considered: • Average soil temperature and moisture content • Time-step normalisation • Rate constant optimisation

  9. Average Temperature and Moisture Content • Good approximation for short-term kinetics when the mean temperature is relatively stable • The average soil temperature and moisture content are determined over an appropriate period and normalisation conducted as for laboratory studies • Useful for older studies with limited measurement data and can give comparable results to the more complex methods • Not suitable for long periods e.g. over several seasons where the conditions vary significantly

  10. Average Temperature and Moisture Content Appropriate over this period Not appropriate over this period

  11. Average Temperature and Moisture Content • Advantages • Good approximation for ‘short-term’ kinetics (i.e. over 1-month) where there is no big variation in conditions • Easy to calculate • Same methodology as for laboratory studies • Disadvantages • Not appropriate for ‘long-term’ kinetics

  12. Time-step Normalisation Concept: • Daily variation in soil temperature and moisture content is accounted for using a normalised day-length (NDL) approach: • 1 day at 15oC and 80%FC is equivalent to 0.58 days at 20oC and 100%FC • 1 day at 25oC and 90%FC is equivalent to 1.38 days at 20oC and 100%FC • Cumulative NDL is then calculated between sampling points • Standard kinetic tools used for evaluations

  13. Time-step Normalisation

  14. Time-step Normalisation Data points ‘regressed’ along the time axis

  15. Time-step Normalisation Plot cumulative NDL vs residue

  16. Time-step Normalisation

  17. Time-step Normalisation • Real example: • 2 year field dissipation study conducted in Northern Europe • Winter application

  18. Time-step Normalisation

  19. Time-step Normalisation

  20. Time-step Normalisation

  21. Time-step Normalisation Normalised DT50 = 102 days Min χ2=6.0 Significant at >99%

  22. Time-step Normalisation • Advantages • Easy to calculate daily factors from available data • No restriction on time periods or parameter variation (i.e. whole year / season can be modelled) • Applies the correction to the whole dataset at once • Standard kinetic modelling schemes and tools can be used for the subsequent analysis of the data • Disadvantages • Same correction factors (Q10, B) applied to whole dataset – although multiple regressions can be made

  23. Rate Constant Optimisation • Uses the same assumptions and input data as the timestep approach • The reference rate constant is adjusted on a daily basis for soil temperature and moisture content and fitted to the measured data

  24. Rate Constant Optimisation

  25. Rate Constant Optimisation

  26. Rate constant optimisation Normalised DT50 = 99 days Min χ2=5.8 Significant at >99%

  27. Rate Constant Optimisation • Advantages • No restriction on time periods or parameter variation (i.e. whole year / season can be modelled) • Good ‘visualisation’ of the effects of soil temperature and moisture content on the dataset and kinetics • Individual Q10 and B factors can be applied • Disadvantages • Requires higher level model to implement (e.g. ModelMaker) • Sometimes difficult to optimise complicated metabolite schemes

  28. Conclusions • A number of approaches can be used to robustly derive normalised degradation rates from field studies for use in risk assessments • The methodology can be used to evaluate data from different seasons and application timings and to understand the processes important for degradation

More Related