1 / 3

Z-Axis Feed Tips Use with a boring head. Use when drilling through soft materials that “pull” drill bit when

Z-Axis Power Feed Operation. Z-Axis Power Feed Components Z-Axis Feed Selector Switch Cutting Depth Stop Feed Rate Selector Z-Axis Feed Engage. 1. Z-Axis Feed Tips Use with a boring head. Use when drilling through soft materials that “pull” drill bit when

huyen
Download Presentation

Z-Axis Feed Tips Use with a boring head. Use when drilling through soft materials that “pull” drill bit when

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Z-Axis Power Feed Operation • Z-Axis Power Feed Components • Z-Axis Feed Selector Switch • Cutting Depth Stop • Feed Rate Selector • Z-Axis Feed Engage 1 • Z-Axis Feed Tips • Use with a boring head. • Use when drilling through soft • materials that “pull” drill bit when • finishing cut. Commonly affected • materials: copper, brass, Plexiglas. 2 3 4

  2. Z-Axis Feed Selector Switch 2) Cutting Depth Stop 2 1 • Set for total depth of cut. • Will automatically disengage • quill feed when desired depth • reached. • Engages power to the quill • feed drive. • Motor cannot be running • when engaged.

  3. 3) Feed Rate Selector 4) Z- Axis Feed Engage 4 3 • Three feed rates: 0.0015”, 0.003” • and 0.006” per revolution. • Use the 0.006” rate for soft • materials, the 0.003” rate for hard • materials and the 0.0015” rate for • all finishing cuts. • May be changed while still or • running. • Swing handle to left to engage • quill feed. • Can manually disengage by • moving handle back to the • right side or will disengage • when reaches depth of cut • stop.

More Related