1 / 21

Introduction to PSpice

Introduction to PSpice. Simulation Software. The Origins of SPICE. In the 1960’s, simulation software begins CANCER C omputer A nalysis of N onlinear C ircuits, E xcluding R adiation Developed at the University of California, Berkley Funded by United States public funds.

hodges
Download Presentation

Introduction to PSpice

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Introduction to PSpice Simulation Software

  2. The Origins of SPICE • In the 1960’s, simulation software begins • CANCER • Computer Analysis of Nonlinear Circuits, Excluding Radiation • Developed at the University of California, Berkley • Funded by United States public funds

  3. The Origins of SPICE • From CANCER to SPICE • SPICE developed in the 1970’s • Simulation Program with Integrated Circuit Emphasis • Developed to save money • Simulation of circuits, not physically building • Transistor sizes • Microprocessors vs. 2N2222

  4. The Origins of SPICE • From SPICE to SPICE2 • SPICE 2 was in response to the wonderful acceptance of SPICE • Comments, questions, and complaints found their way back to UC-Berkley • SPICE 2 was released into the public domain • This means its free to use in the United States • Commercial versions that offer much more support and features

  5. That Was Then • The original way of entering circuit information • A text file with syntax specific to the simulator • Easy to remember commands and syntax • R – Resistor • C – Capacitor • L – Inductor • {Element} {node1} {node2} {value} • Entered into any text editor with proper syntax

  6. That Was Then • The circuit above is shown in the text file to the right

  7. That Was Then

  8. This Is Now • New user interface • Graphical circuit diagrams • Variation of simulation parameters with a few clicks

  9. First Look at Capture • First window you will see when you open Capture • Create a new Project • File  New  Project • This will open a new window

  10. New Project Window • Select a project name • PSpice Lab Simulation • Select a project location • C:\PSpice\{YourName} • Select what type of project • Analog or Mixed A/D • Click OK

  11. Create PSpice Project • This window will open • Select the bottom option • Create a blank project • Click OK

  12. The Project Windows • The Main Project Window • Two other information windows • Session Log Window • Project File Window • Our main window • Schematic 1: Page 1

  13. Place Parts • Place the 5 resistors • Using Place  Part • Type ‘R’ in Part Field • Place the Voltage Source • Using Place  Part • Type ‘Vdc’ in Part Field • Right click and choose “End Mode”

  14. Rotate and Move Resistors • Click on the resistor • Use ‘Ctrl+R’ to rotate • Repeat for 4 resistors • Move and place the resistors in parallel • Change the values • Double Click on the ‘1k’ and enter ‘4k’ of the parallel resistors

  15. Change the Voltage and Wire • Change DC Voltage • Double Click on ‘0Vdc’ and enter ’16Vdc’ • Now wire the circuit • Using Place  Wire • Click on one node, and ‘draw’ to the other and click again • Right click and select “End Mode”

  16. Placing the Ground • Every PSpice circuit must have a ground • Use the icons on the right • 9th icon down • This opens the “Place Ground” window • Select the ‘0/Source’ • Click OK

  17. The Completed Circuit

  18. Simulation Profile • Need to create a simulation profile • PSpice  New Simulation Profile • Name the profile • DC Solution • Click OK

  19. Edit the Simulation Profile • Go to the Analysis Tab • Under the Analysis type, choose Bias Point • This is to find the DC solution • Click OK • Ready to Simulate

  20. Running the Simulation • The last step is to RUN the simulation • Do this by selecting PSpice  Run • After running the simulation a new window will open • Close this window and return to the Schematic 1: Page 1 window • Use the “V” and “I” (and maybe “W”) icons on the top of the screen • For finding voltages and currents (and power)

  21. Now You Know • With this basic underlying knowledge • Can change • Resistor values • Voltage supply values • Resistor configuration • Can learn • More simulation parameters • More components for simulation • Time for Lab – Good Luck

More Related