Lean On - PowerPoint PPT Presentation

hien
slide1 n.
Skip this Video
Loading SlideShow in 5 Seconds..
Lean On PowerPoint Presentation
play fullscreen
1 / 9
Download Presentation
Lean On
117 Views
Download Presentation

Lean On

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. Lean On Luke Lindsey, Chuck Lampp, Jeremy Spivack, Matt Hinssen, Thomas Burke, Brady Doudna, and Adam McNally

  2. Remember…

  3. Design • Jig Material: • Sanitary • Machinability • Cost • Toughness • Withstand 4’ drop UHMWPE • Custom Socket Material: • Wear Resistant • Stiff Delrin or SS 303 • T-Bar Material: UHMWPE Torque Wrench Jig Custom Socket T-Bar

  4. Custom Socket Standard Size Hex Tight Tolerances

  5. Assembly Jig *Tight Tolerances * * * * *

  6. Estimated Cost • Note: Torque Wrench = $61

  7. Beckman Machine Quote • With Delrin Socket • 1  $429 • 6  $272 • 12  $242 • With SS 303 Socket • 1  $504 • 6  $315 • 12 $285 • Cost Comparison Est. Cost (Delrin) = $229.60 Est. Cost (SS 303)= $259.90 • Note: Torque Wrench = $61

  8. Potential Cost Improvements • Transition from UHMWPE to HDPE • Also FDA compliant and wear resistant • Decreases total material cost for one jig by $5 • Maybe insignificant • Eliminating T-Slot • Total Cost Decrease ≈ $50 • Will design new way for table attachment • Potentially Velcro  cost per jig ≈ $1 • With Improvements • Total Jig Estimated Cost (w/wrench) ≈ $242